What is a Grain husk powder pneumatic conveying? Introduction to the advantages, characteristics, and principles of the Pneumatic conveying equipment

Grain husk powder pneumatic conveyingit uses the kinetic energy and pressure energy of air flow to transport materials from the starting point to the destination pipeline.。

1、Brief introduction of Grain husk powder pneumatic conveying

Grain husk powder pneumatic conveyingis a kind of material conveying equipment which combines jet technology and fluidization technology.，the product looks beautiful.，it is widely used in power, medicine, cast, logistics and transportation。

Grain husk powder pneumatic conveying

2、Functional advantages of Grain husk powder pneumatic conveying

Grain husk powder pneumatic conveyings have the following advantages.

1. Small floor space

Compared with the traditional mechanical conveying mode, the Grain husk powder pneumatic conveying system can save a lot of mechanical equipment and conveying pipes, thus saving a lot of space.

2. Flexible configuration of conveying pipeline and optimization of process flow.

The conveying pipeline can be flexibly configured according to the actual layout of the factory, which makes the process configuration of the factory equipment more reasonable, optimizes the production process and improves the labor productivity.

3. Multiple process operations can be carried out at the same time

In the process of conveying, the Grain husk powder pneumatic conveying system can also perform physical operations such as heating, cooling, drying and airflow classification or some chemical operations at the same time, which increases the versatility of the system.

4. Convenient maintenance and easy automation.

The Grain husk powder pneumatic conveying system has relatively few moving parts, which makes the maintenance more convenient. At the same time, due to its structural characteristics, the system is easy to realize automatic control, which improves production efficiency and management convenience.

5. Environmental protection and pollution-free

The Grain husk powder pneumatic conveying system can reduce the scattering and flying of materials, reduce dust pollution and material loss, and also reduce energy consumption and noise pollution during transportation.

Grain husk powder pneumatic conveying

3、Grain husk powder pneumatic conveying use

The purpose of Grain husk powder pneumatic conveying is introduced as follows:

1. Process assistance

In some production processes, Grain husk powder pneumatic conveyings are not only used for conveying materials, but also as part of the process. For example, in the chemical and pharmaceutical industries, the Grain husk powder pneumatic conveying system can cooperate with other equipment to realize process operations such as mixing, grading, drying and cooling of materials, and improve production efficiency and product quality.

2. Environmental protection and cleaner production

The Grain husk powder pneumatic conveying process is carried out in a closed pipeline, which effectively prevents dust from flying and leaking, thus reducing environmental pollution and harm to employees' health. This is especially important for industries that need to maintain high cleanliness or dust-free environment.

3. Adapt to complex environment

The Grain husk powder pneumatic conveying system can adapt to various complex environments and layout requirements. Whether in high temperature, high humidity, corrosive or flammable and explosive environment, the normal operation of the system can be ensured by selecting suitable materials and taking corresponding safety measures. In addition, the Grain husk powder pneumatic conveying pipes can be flexibly arranged according to the actual situation of the production site, which makes the configuration of factory equipment more reasonable.

4. Reduce pollution

The Grain husk powder pneumatic conveying system carries out material transportation in a fully enclosed state, which effectively reduces the environmental pollution caused by dust flying and material leakage.

5. Dust removal and purification

The Grain husk powder pneumatic conveying system is usually equipped with a dust collector to collect and treat the dust generated in the transportation process to keep the production environment clean and hygienic.

Grain husk powder pneumatic conveying

4、Grain husk powder pneumatic conveying field real shot

hyde Grain husk powder pneumatic conveying is completely upgraded, savoring the beauty of details.。

Grain husk powder pneumatic conveying

Note: All the pictures in this article were taken by hyde powder manufacturer.。

5、Structural characteristics of Grain husk powder pneumatic conveying

The Grain husk powder pneumatic conveying has the following structure

1. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

2. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

3. Air source device

The air source device is the power core of the Grain husk powder pneumatic conveying system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

4. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Grain husk powder pneumatic conveying system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

5. control system

The control system is the "brain" of the Grain husk powder pneumatic conveying system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

Grain husk powder pneumatic conveying

Grain husk powder pneumatic conveyingit can be used in environmental protection, building materials, medicine, chemical plant, grain processing and other industries，at work,Using aerodynamic force, compressed air or other gases form airflow in the pipeline, and the material particles are suspended in the airflow or transported along the pipeline in groups.。