Introduction to Resin powder conveying, advantages, characteristics and principles of Material conveying

Resin powder conveyingis a technology that uses the energy of airflow to transport granular materials along the direction of airflow in a closed pipeline.。

1、Brief introduction of Resin powder conveying

Resin powder conveyingis an efficient and environment-friendly way to transport materials by using the energy of airflow.，is a kind of Resin powder conveying manufactured by hyde。

Resin powder conveying

2、Introduction of advantages of Resin powder conveying

Resin powder conveyings have the following advantages.

1. Material quality protection

In the process of conveying, the Resin powder conveying can prevent the materials from getting wet, soiled or mixed with other impurities, thus ensuring the quality of the conveyed materials.

2. Strong sealing

The conveying pipeline can be flexibly configured according to the factory layout and process requirements, and can meet the conveying requirements regardless of the horizontal, vertical or inclined direction. In addition, the Resin powder conveying system can be seamlessly connected with other production equipment to improve the overall production efficiency.

3. Environmental protection and pollution-free

Compared with the traditional mechanical transportation mode, the Resin powder conveying has higher transportation efficiency, which can reduce transportation time and transportation cost. Moreover, the Resin powder conveying does not need additional power to drive, which reduces energy consumption.

4. Multi-point to multi-point transportation

The Resin powder conveying system can realize multi-point to multi-point transportation, meet the needs of different production lines and improve the production flexibility.

5. High degree of automation

The Resin powder conveying system can realize automatic control and remote monitoring, which improves the automation level and production efficiency of the production process.

Resin powder conveying

3、Resin powder conveying application

Resin powder conveyings have the following purposes.

1. Mixing and classification

In the process of conveying, the Resin powder conveying system can cooperate with other equipment to realize the mixing and grading operation of materials, and improve the production efficiency and product quality.

2. material handling

Resin powder conveying system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

3. Long-distance and multipoint transportation

The Resin powder conveying system can realize long-distance material transportation and meet the demand of long-distance material transfer. At the same time, it can also realize multi-point transportation, that is, materials are collected from multiple locations and transported to a centralized point, or materials are dispersed from a centralized point to multiple locations. This flexibility makes Resin powder conveyings have important application value in large factories and cross-regional material transportation.

4. Heating, cooling and drying

Heating, cooling or drying equipment can be installed in the Resin powder conveying pipeline to carry out necessary treatment of materials to meet the specific requirements in the production process.

5. Dust removal and purification

The Resin powder conveying system is usually equipped with a dust collector to collect and treat the dust generated in the transportation process to keep the production environment clean and hygienic.

Resin powder conveying

4、Resin powder conveying customer scene picture

Different specifications and models of high-definition pictures, so that everyone can see enough at once.。

Resin powder conveying

Note: All the pictures in this article were taken by hyde powder manufacturer.。

5、Resin powder conveying advantage

The advantages of Resin powder conveying are as follows:

1. Low maintenance cost

The Resin powder conveying device has the advantages of simple structure, few moving parts, convenient maintenance and reduced maintenance cost. At the same time, the equipment occupies a small area and can make full use of space.

2. Small floor space

Compared with the traditional mechanical transportation mode, the equipment and pipelines required by the Resin powder conveying occupy a smaller area, which can make full use of the space and reduce the construction cost and floor space of the factory building.

3. Structural construction

The structure is relatively simple, mainly composed of conveying pipeline, air source equipment, control system, etc., and the maintenance is convenient.

4. energy saving and environmental protection

In the process of Resin powder conveying opening, dust pollution and noise pollution will hardly occur, which is more environmentally friendly than traditional mechanical transportation.

5. High conveying quality

In the process of conveying, the Resin powder conveying system can prevent the materials from being wetted, stained or mixed with other sundries, thus ensuring the quality of the conveyed materials.

Resin powder conveying

6、Resin powder conveying picture

the product looks atmospheric., advanced technology, complete specifications and models。

Resin powder conveying

Note: All the pictures in this article were taken by hyde manufacturer.。

Resin powder conveyingis a kind of material conveying equipment which uses air flow energy to convey granular materials in a closed pipeline.，It has a wide range of uses, and is often used incut down on energy consumption,material handling,Reduce pollution,Long-distance and multipoint transportation,Bulk material transportation and so on。