What is a Borax conveying? Introduction to the Working Principle of pneumatic conveying system

Borax conveyingIt refers to a mode of transportation in which granular materials are continuously transported according to the specified route with the help of air energy (kinetic energy or static pressure energy) in the pipeline.，it is widely used in build a ship, heat-engine plant, pharmaceutical factory, plastic and environmental protection，In the process of conveying, various technological operations can be carried out at the same time, such as dust.、Multi-point feeding and multi-point discharging can be realized, and remote operation can be realized.、The materials are completely sealed during transportation.，The material is not affected by the outside world and will not be wet or deteriorated. Not easy to leak, causing dust flying, fully sealed and pollution-free transportation.、Flexible pipeline layout, closed pipeline can be adjusted according to production conditions, which is relatively flexible.，meet the needs of material transportation、In the conveying process, various technological operations can be carried out at the same time.。The following is to introduce the Borax conveying:

1、Brief introduction of Borax conveying

Borax conveyingis a technology to transport solid particulate materials through air flow.，It has a wide range of uses, and is often used incut down on energy consumption,Long distance transportation,Mixing and classification,Multi-point transportation,Environmental protection and cleaner production and so on，it has the structure of delivery system, delivery system, Bunker system, Conveying pipeline system and control system，Borax conveyingThe structural design is more advanced and reasonable.。

Borax conveying

2、Borax conveying HD picture

HD pictures of Borax conveying of different specifications and models。

Borax conveying

Note: All the pictures in this article were taken by hyde powder manufacturer.。

3、Borax conveying structure composition

The Borax conveying structure is introduced as follows:

1. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

2. control system

The control system is the "brain" of the Borax conveying system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

3. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

4. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

5. Air source device

The air source device is the power core of the Borax conveying system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

Borax conveying

4、Borax conveying use

The purpose of Borax conveying is introduced as follows:

1. material handling

Borax conveying system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

2. Multi-point transportation

The Borax conveying system can be flexibly configured to realize transportation from multiple centralized points to one centralized point, or from one centralized point to multiple centralized points, so as to meet the complex production layout requirements.

3. Environmental protection and cleaner production

The Borax conveying process is carried out in a closed pipeline, which effectively prevents dust from flying and leaking, thus reducing environmental pollution and harm to employees' health. This is especially important for industries that need to maintain high cleanliness or dust-free environment.

4. Adapt to complex environment

The Borax conveying system can adapt to various complex environments and layout requirements. Whether in high temperature, high humidity, corrosive or flammable and explosive environment, the normal operation of the system can be ensured by selecting suitable materials and taking corresponding safety measures. In addition, the Borax conveying pipes can be flexibly arranged according to the actual situation of the production site, which makes the configuration of factory equipment more reasonable.

5. cut down on energy consumption

Although the power consumption of the Borax conveying is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

Borax conveying

5、Borax conveying characteristics

Borax conveyingit has the characteristics of Convenient for material transportation and recovery., Easy to automate management, be of simple construction, Can carry out long-distance dispersion transportation. and Reduce material loss，multifunctional, with functions such as Closed conveying, Automatic control, Explosion-proof involves, Physical processing assistance and Environmental protection and pollution-free。

Borax conveying

6、How much is the Borax conveying?

The Borax conveying price is introduced as follows:

1. Brand strength

At present, there are various brands of Borax conveying in jinan, Shandong province. The performance, quality and after-sales of products under different brands are different, and the prices of Borax conveying are different.

2. product costs

The cost of manufacturing Borax conveying varies from manufacturer to manufacturer. The higher the cost of manufacturing products, the higher the product price will be. On the other hand, the lower the production cost, the lower the product price, but the quality of products with high production cost is guaranteed, which can reduce the maintenance cost of customers.

3. raw material

Different manufacturers have different material selection standards. The better the quality of the selected materials, the more expensive the products will be. On the contrary, the prices will be low. However, to avoid customers being deceived, compare several products of the same specification and model before deciding to purchase.

4. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

5. Reasonable sales model

Each manufacturer's sales model is different, and the preferential degree of products is also different. Some manufacturers adopt the mode of "thin profit and quick turnover", and the price is relatively cheap. Some manufacturers sell their products at high prices to earn high profits. When purchasing products, they must compare the prices to avoid being cheated.

Borax conveying

Borax conveyingwidely used in metallurgy, power, building material, chemical industry, medicine and other fields，the product looks beautiful.。