Introduction to Pneumatic conveying of sand and gravel materials, Pneumatic conveying equipment advantages, characteristics and principles

Pneumatic conveying of sand and gravel materialsis a conveying technology that uses the energy of airflow to convey granular materials along the airflow direction in a closed pipeline.，is developed and improved by hyde。

1、Brief introduction of Pneumatic conveying of sand and gravel materials

Pneumatic conveying of sand and gravel materialsis a kind of technical integrated system that uses air or gas flow as conveying power to convey bulk solid materials in pipelines.，It has a wide range of uses, including Heating, cooling and drying, Environmental protection and cleaner production, Long distance transportation, Reduce pollution and Bulk material transportation。

Pneumatic conveying of sand and gravel materials

2、Pneumatic conveying of sand and gravel materials application

Pneumatic conveying of sand and gravel materialss have the following purposes.

1. Environmental protection and cleaner production

The Pneumatic conveying of sand and gravel materials process is carried out in a closed pipeline, which effectively prevents dust from flying and leaking, thus reducing environmental pollution and harm to employees' health. This is especially important for industries that need to maintain high cleanliness or dust-free environment.

2. Dust removal and purification

The Pneumatic conveying of sand and gravel materials system is usually equipped with a dust collector to collect and treat the dust generated in the transportation process to keep the production environment clean and hygienic.

3. save energy and cut emissions

Although the Pneumatic conveying of sand and gravel materials system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

4. Long-distance and multipoint transportation

The Pneumatic conveying of sand and gravel materials system can realize long-distance material transportation and meet the demand of long-distance material transfer. At the same time, it can also realize multi-point transportation, that is, materials are collected from multiple locations and transported to a centralized point, or materials are dispersed from a centralized point to multiple locations. This flexibility makes Pneumatic conveying of sand and gravel materialss have important application value in large factories and cross-regional material transportation.

5. Mixing and classification

In the process of conveying, the Pneumatic conveying of sand and gravel materials system can cooperate with other equipment to realize the mixing and grading operation of materials, and improve the production efficiency and product quality.

Pneumatic conveying of sand and gravel materials

3、Pneumatic conveying of sand and gravel materials structure composition

The Pneumatic conveying of sand and gravel materials has the following structure

1. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

2. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

3. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Pneumatic conveying of sand and gravel materials system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

4. Air source device

The air source device is the power core of the Pneumatic conveying of sand and gravel materials system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

5. control system

The control system is the "brain" of the Pneumatic conveying of sand and gravel materials system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

Pneumatic conveying of sand and gravel materials

4、Advantages of Pneumatic conveying of sand and gravel materials principle

Pneumatic conveying of sand and gravel materialsat runtime,It mainly uses the energy of airflow to transport granular materials along the airflow direction in a closed pipeline.，features include Simple system, High system reliability, Reduce material loss, automation and The failure rate is low，widely used in pharmaceutical factory, plastic, logistics, medicine, machine building and other fields，it has the structure of Air source system, Conveying pipeline system, delivery system, Bunker system and dust pelletizing system，the product looks beautiful.。

Pneumatic conveying of sand and gravel materials

5、Pneumatic conveying of sand and gravel materials characteristics

Pneumatic conveying of sand and gravel materialsit has the characteristics of easy installation, convenient to use, Flexible conveying distance, Easy maintenance and The conveying speed is faster，The structure is novel, special, advanced, reasonable and scientific.，it mainly includes control system, Air source system, Bunker system, delivery system and Conveying pipeline system，it is an ideal choice for customers to buy Pneumatic conveying of sand and gravel materials。

Pneumatic conveying of sand and gravel materials

6、How much is the Pneumatic conveying of sand and gravel materials?

The Pneumatic conveying of sand and gravel materials price is introduced as follows:

1. market quotation

The amount of customers' demand for Pneumatic conveying of sand and gravel materials in the market also has a great influence on the price. When there are many customers purchasing this product in the market and the supply quantity of manufacturers is small, the Pneumatic conveying of sand and gravel materials price will be very high. On the contrary, when fewer customers purchase this product, there will be a phenomenon of oversupply, and the price of Pneumatic conveying of sand and gravel materials will naturally be reduced.

2. After-sales service level

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, hyde powder Pneumatic conveying of sand and gravel materials manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Pneumatic conveying of sand and gravel materials price can meet the purchasing needs of customers.

3. select a qualified person

The raw materials used by manufacturers of different products will definitely be different. Some manufacturers use good raw materials for processing, and the cost of producing and manufacturing products is definitely high. If the quality of products produced by manufacturers is not guaranteed and the materials used are not very good, then the production cost of products will be low, and the price will be very low.

4. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

5. cost of production

When the Pneumatic conveying of sand and gravel materials is manufactured, the materials selected by different manufacturers will be different. Some manufacturers use high-quality materials, and the price will be relatively high, while some manufacturers use ordinary materials, and the price will be lower.

Pneumatic conveying of sand and gravel materials

Pneumatic conveying of sand and gravel materialsWidely used inmaterial handling,Process assistance,Dust removal and essence,Multi-point transportation,Heating, cooling and drying and so on，at work,Mainly based on aerodynamic force, the continuous and stable transportation of granular materials is realized in a closed pipeline by using the energy of airflow.。