What is a Graphite pneumatic conveying? How much is the price of the Powder conveying?

Graphite pneumatic conveyingis a conveying system that uses airflow to convey powder and granular materials.。

1、Brief introduction of Graphite pneumatic conveying

Graphite pneumatic conveyingthat is, the technology of conveying granular materials in closed pipes by air flow.，is a popular Graphite pneumatic conveying，be of high quality，low in price。

Graphite pneumatic conveying

2、Graphite pneumatic conveying performance advantage

The advantages of Graphite pneumatic conveying are as follows:

1. High conveying efficiency and low cost.

The Graphite pneumatic conveying can convey materials continuously and stably, and the conveying speed is faster, which improves the production efficiency and conveying capacity.

2. Convenient maintenance and easy automation.

The Graphite pneumatic conveying system does not need a lot of mechanical equipment, so its maintenance cost is relatively small. In addition, in the process of use, it is only necessary to clean the pipeline regularly and keep it airtight.

3. Totally enclosed conveying

The pipeline layout of the Graphite pneumatic conveying is flexible and can be flexibly configured according to the actual layout and process requirements of the factory. This flexibility enables the Graphite pneumatic conveying system to adapt to various complex production environments and meet different production needs.

4. Low maintenance cost

The Graphite pneumatic conveying system has relatively few moving parts, which makes the maintenance more convenient. At the same time, due to its structural characteristics, the system is easy to realize automatic control, which improves production efficiency and management convenience.

5. Environmental protection and pollution-free

The Graphite pneumatic conveying system can reduce the scattering and flying of materials, reduce dust pollution and material loss, and also reduce energy consumption and noise pollution during transportation.

Graphite pneumatic conveying

3、Graphite pneumatic conveying structure composition

The Graphite pneumatic conveying has the following structure

1. control system

The control system is the "brain" of the Graphite pneumatic conveying system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

2. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

3. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

4. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

5. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Graphite pneumatic conveying system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

Graphite pneumatic conveying

4、Graphite pneumatic conveying use

The purpose of Graphite pneumatic conveying is introduced as follows:

1. Reduce pollution

The Graphite pneumatic conveying system carries out material transportation in a fully enclosed state, which effectively reduces the environmental pollution caused by dust flying and material leakage.

2. Long distance transportation

The Graphite pneumatic conveying system can realize long-distance material transportation and meet the demand of long-distance material transfer. This is especially important for some large factories or cross-regional material transportation.

3. Multi-point transportation

The Graphite pneumatic conveying system can be flexibly configured to realize transportation from multiple centralized points to one centralized point, or from one centralized point to multiple centralized points, so as to meet the complex production layout requirements.

4. Dust removal and purification

The Graphite pneumatic conveying system is usually equipped with a dust collector to collect and treat the dust generated in the transportation process to keep the production environment clean and hygienic.

5. material handling

Graphite pneumatic conveying system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

Graphite pneumatic conveying

5、Graphite pneumatic conveying price consultation

The Graphite pneumatic conveying price is introduced as follows:

1. quality

Quality generally refers to the quality of the product. The better the quality, the higher the quality of the product. Because the quality is directly proportional to the cost of the product, the price of the Graphite pneumatic conveying will vary greatly. hyde powder attaches great importance to the quality of products, and the formulation of prices is also reasonable.

2. technology content

The more advanced the technology, the higher the price will be, otherwise the product price will be low, and customers must pay attention to whether their own technology meets the production requirements when purchasing products.

3. Model type

The same type of products, with different specifications, models and sizes, have different costs, so the quotations to customers naturally vary. Generally speaking, the larger the model, the higher the price, and the smaller the model, the lower the price.

4. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

5. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Graphite pneumatic conveying have more or less differences in price.

Graphite pneumatic conveying

6、Company selection

Choosing a suitable Graphite pneumatic conveying manufacturer requires comprehensive consideration of many aspects. First of all, we should examine the strength of manufacturers, including production capacity, R&D team and industry experience. Strong manufacturers can better ensure product supply and innovation ability. Secondly, product quality is the key, and it is evaluated by product certification, material selection and manufacturing process to ensure the durability of products. Product performance can not be ignored, so we should choose manufacturers with matching technical parameters, rich types and customized services according to actual needs. After-sales service is equally important. Professional and timely service team, perfect after-sales content and extensive service network can make users worry about nothing. In addition, market reputation is also an important reference. We can understand the reputation and status of manufacturers through customer evaluation, industry reputation and award-winning honor. Finally, it is necessary to analyze the price and cost performance, and on the premise of ensuring the quality and performance, choose a manufacturer with reasonable price and high cost performance, so as to purchase Graphite pneumatic conveying products that meet the demand and have good cost performance.。

hyde powder

Graphite pneumatic conveyingthe advantage is The material is completely closed in the whole conveying process.，It can prevent the material from spreading, with high quality, complete sealing and pollution-free transportation.、In the process of transportation, various technological operations can be carried out at the same time, such as physical and chemical processes such as be broken.、Large conveying capacity, long conveying distance and high conveying quality.、In the process of conveying, various technological operations can be carried out at the same time, such as dry.、Remote operation can be carried out from several points to one place or from one place to several points.，at runtime,Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline. In the process of transportation, gas-solid separator (such as dust collector) is used to separate materials from air to ensure the quality of transported materials.。