Introduction to Maltose transportation, introduction to Powder conveying function advantages and characteristics

Maltose transportationis a technology that uses the energy of airflow to transport granular materials along the airflow direction in a closed pipeline.，the advantage is The whole conveying process is sealed.，No dust leakage, environmental protection and pollution-free, fully sealed and pollution-free transportation.、Materials are transported in a closed pipeline.，It can reduce the pollution to the surrounding environment in the process of transportation, improve the production environment, facilitate safe production, and completely seal and transport without pollution.、It can be sent from several points to one place in a centralized way, or from one place to several points in a decentralized way for long-distance operation.、In the conveying process, various technological operations can be carried out at the same time.、Large conveying capacity, long conveying distance and high conveying quality.，is carefully developed by hyde combined with advanced technology。

1、Brief introduction of Maltose transportation

Maltose transportationis a technology that uses the energy of airflow to transport granular materials along the direction of airflow in a closed pipeline.。

Maltose transportation

2、Functional advantages of Maltose transportation

Maltose transportations have the following advantages.

1. Save space

Maltose transportation equipment usually occupies a small area and can make full use of space. This is especially important for factories or production lines with limited space, which can save valuable production space.

2. Material quality protection

In the process of conveying, the Maltose transportation can prevent the materials from getting wet, soiled or mixed with other impurities, thus ensuring the quality of the conveyed materials.

3. Easy to maintain

The Maltose transportation system does not need a lot of mechanical equipment, so its maintenance cost is relatively small. In addition, in the process of use, it is only necessary to clean the pipeline regularly and keep it airtight.

4. Convenient maintenance and easy automation.

The Maltose transportation system has relatively few moving parts, which makes the maintenance more convenient. At the same time, due to its structural characteristics, the system is easy to realize automatic control, which improves production efficiency and management convenience.

5. Small floor space

Compared with the traditional mechanical transportation mode, the equipment and pipelines required by the Maltose transportation occupy a smaller area, which can make full use of the space and reduce the construction cost and floor space of the factory building.

Maltose transportation

3、Maltose transportation function

Maltose transportationmultifunctional, with functions such as Physical processing assistance, Environmental protection and pollution-free, Closed conveying, Automatic control and Explosion-proof involves，the product looks beautiful.，features include Large conveying capacity, Flexible transmission line, Stable operation, Long conveying distance and omniseal，the main features are Convenient for material transportation and recovery., Operation safety, Large conveying capacity, High production efficiency and convenient to use，it is an ideal choice for customers to buy Maltose transportation。

Maltose transportation

4、Maltose transportation video

On-site aerial photography of Maltose transportation。

Maltose transportation

As you can see from the live video.，Shandong Haide Fenti Engineering Co., Ltd. the product looks atmospheric.。

5、Structural advantages of Maltose transportation

The Maltose transportation has the following structure

1. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

2. Air source device

The air source device is the power core of the Maltose transportation system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

3. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Maltose transportation system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

4. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

5. control system

The control system is the "brain" of the Maltose transportation system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

Maltose transportation

6、Maltose transportation function

Maltose transportationmultifunctional, with functions such as Physical processing assistance, material handling, Environmental protection and pollution-free, Explosion-proof involves and Automatic control，at runtime,Mainly using the dynamic pressure and static pressure of air, the material particles are suspended in the airflow or transported in groups along the pipeline.，The material is completely closed in the whole conveying process.，Effectively prevent materials from absorbing moisture, fouling or mixing with other impurities during transportation, and fully seal and transport without pollution.、Can be transported from one point to one place or from one point to many points.、In the process of conveying, various technological operations can be carried out at the same time, such as be broken.、Flexible pipeline layout, closed pipeline can be adjusted according to production conditions, which is relatively flexible.、Materials are transported by closed pipelines.，It can prevent the material from spreading, with high quality, complete sealing and pollution-free transportation.，The overall structural design is relatively simple，it is usually composed of dust pelletizing system, delivery system, Bunker system, Conveying pipeline system and Air source system，It can be used for Process assistance, Long-distance and multipoint transportation, Mixing and classification, Multi-point transportation, Bulk material transportation, Environmental protection and cleaner production and so on。

Maltose transportation

Maltose transportationit has the functions of Closed conveying, Physical processing assistance, material handling, Explosion-proof involves and Physical processing assistance，the product looks atmospheric.。