Introduction to Raw material pneumatic conveying and Material conveying working principle

Raw material pneumatic conveyingis a material conveying system that uses the pressure of gas to convey powder materials.，In the process of conveying, various technological operations can be carried out at the same time, such as smash.、The whole conveying process is sealed.，Less dust flying, meeting the requirements of environmental protection, fully sealed and pollution-free transportation.、The materials concentrated from several points can be sent to one place or sent to scattered points from one place.、In the process of conveying, various technological operations can be carried out at the same time, such as mix.、PLC intelligent control, high degree of automation and simple operation.，has been favored by more and more customers.。The following is to introduce the Raw material pneumatic conveying:

1、Brief introduction of Raw material pneumatic conveying

Raw material pneumatic conveyingis a material conveying technology for conveying granular particles in a pipeline by means of compressed air flow.，the main structure includes dust pelletizing system, Bunker system, Bunker system, dust pelletizing system and delivery system，Raw material pneumatic conveyingThe overall structural design is simple, diverse and beautiful.，is a common Raw material pneumatic conveying，the product looks beautiful.，It is mostly used in material handling, Mixing and classification, Environmental protection and cleaner production, Multi-point transportation, Reduce pollution, Bulk material transportation and so on。

Raw material pneumatic conveying

2、Introduction of Raw material pneumatic conveying characteristics

Raw material pneumatic conveyingthe main features are Flexible transmission line, Safe and reliable, The conveying speed is faster, be of simple construction and No secondary pollution，the product looks atmospheric.，is based on hyde is an advanced Raw material pneumatic conveying developed by our company in combination with the actual situation of the industry。

Raw material pneumatic conveying

3、Raw material pneumatic conveying structure

The Raw material pneumatic conveying structure is introduced as follows:

1. control system

The control system is the "brain" of the Raw material pneumatic conveying system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

2. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

3. Air source device

The air source device is the power core of the Raw material pneumatic conveying system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

4. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

5. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

Raw material pneumatic conveying

4、Raw material pneumatic conveying use

The purpose of Raw material pneumatic conveying is introduced as follows:

1. Adapt to complex environment

The Raw material pneumatic conveying system can adapt to various complex environments and layout requirements. Whether in high temperature, high humidity, corrosive or flammable and explosive environment, the normal operation of the system can be ensured by selecting suitable materials and taking corresponding safety measures. In addition, the Raw material pneumatic conveying pipes can be flexibly arranged according to the actual situation of the production site, which makes the configuration of factory equipment more reasonable.

2. Long-distance and multipoint transportation

The Raw material pneumatic conveying system can realize long-distance material transportation and meet the demand of long-distance material transfer. At the same time, it can also realize multi-point transportation, that is, materials are collected from multiple locations and transported to a centralized point, or materials are dispersed from a centralized point to multiple locations. This flexibility makes Raw material pneumatic conveyings have important application value in large factories and cross-regional material transportation.

3. cut down on energy consumption

Although the power consumption of the Raw material pneumatic conveying is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

4. Multi-point transportation

The Raw material pneumatic conveying system can be flexibly configured to realize transportation from multiple centralized points to one centralized point, or from one centralized point to multiple centralized points, so as to meet the complex production layout requirements.

5. Reduce pollution

The Raw material pneumatic conveying system carries out material transportation in a fully enclosed state, which effectively reduces the environmental pollution caused by dust flying and material leakage.

Raw material pneumatic conveying

5、Structural characteristics of Raw material pneumatic conveying

The Raw material pneumatic conveying structure is introduced as follows:

1. Air source device

The air source device is the power core of the Raw material pneumatic conveying system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

2. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Raw material pneumatic conveying system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

3. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

4. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

5. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

Raw material pneumatic conveying

6、Company selection

Choosing a suitable Raw material pneumatic conveying manufacturer requires comprehensive consideration of many aspects. First of all, we should examine the strength of manufacturers, including production capacity, R&D team and industry experience. Strong manufacturers can better ensure product supply and innovation ability. Secondly, product quality is the key, and it is evaluated by product certification, material selection and manufacturing process to ensure the durability of products. Product performance can not be ignored, so we should choose manufacturers with matching technical parameters, rich types and customized services according to actual needs. After-sales service is equally important. Professional and timely service team, perfect after-sales content and extensive service network can make users worry about nothing. In addition, market reputation is also an important reference. We can understand the reputation and status of manufacturers through customer evaluation, industry reputation and award-winning honor. Finally, it is necessary to analyze the price and cost performance, and on the premise of ensuring the quality and performance, choose a manufacturer with reasonable price and high cost performance, so as to purchase Raw material pneumatic conveying products that meet the demand and have good cost performance.。

hyde powder

Raw material pneumatic conveyingThe materials are completely sealed during transportation.，No dust leakage, environmental protection and pollution-free, fully sealed and pollution-free transportation.、In the process of transportation, various technological operations can be carried out at the same time, such as physical and chemical processes such as grade.、Multi-point feeding and multi-point discharging are possible.、The pipeline layout is flexible, and it can be arranged according to the specific terrain.，meet the needs of material transportation、Materials are transported in a closed pipeline.，It can reduce the pollution to the surrounding environment in the process of transportation, improve the production environment, facilitate safe production, and completely seal and transport without pollution.，the product looks atmospheric.。