Introduction to Pneumatic conveying of glass microbeads and pneumatic conveying structure principle

Pneumatic conveying of glass microbeadsis to transport granular materials along the direction of airflow in a closed pipeline by using the energy of airflow.，the main features are Flexible transmission line, convenient to use, High production efficiency, High system reliability and Wide range of conveying materials，at runtime,The material and air flow form a gas-solid two-phase flow to realize continuous and stable material transportation.。The following is to introduce the Pneumatic conveying of glass microbeads:

1、Brief introduction of Pneumatic conveying of glass microbeads

Pneumatic conveying of glass microbeadsis a material conveying system that combines jet technology and fluidization technology.，the product looks beautiful.，is a Pneumatic conveying of glass microbeads newly developed by hyde powder。

Pneumatic conveying of glass microbeads

2、Pneumatic conveying of glass microbeads HD real shot

Pneumatic conveying of glass microbeads specifications and models, novel design, beautiful appearance, for our customers to visit.。

Pneumatic conveying of glass microbeads

Note: All the pictures in this article were taken by hyde manufacturer.。

3、Structural characteristics of Pneumatic conveying of glass microbeads

The Pneumatic conveying of glass microbeads structure is introduced as follows:

1. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Pneumatic conveying of glass microbeads system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

2. Air source device

The air source device is the power core of the Pneumatic conveying of glass microbeads system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

3. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

4. control system

The control system is the "brain" of the Pneumatic conveying of glass microbeads system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

5. Air source device

The air source device is the power core of the Pneumatic conveying of glass microbeads system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

Pneumatic conveying of glass microbeads

4、Pneumatic conveying of glass microbeads HD picture

Various specifications and models of Pneumatic conveying of glass microbeads are displayed for our customers to visit.。

Pneumatic conveying of glass microbeads

Note: All the pictures in this article were taken by hyde powder manufacturer.。

5、Pneumatic conveying of glass microbeads structure composition

The Pneumatic conveying of glass microbeads has the following structure

1. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

2. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Pneumatic conveying of glass microbeads system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

3. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

4. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

5. control system

The control system is the "brain" of the Pneumatic conveying of glass microbeads system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

Pneumatic conveying of glass microbeads

6、Working principle of Pneumatic conveying of glass microbeads

Pneumatic conveying of glass microbeadsCompressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline. In the process of transportation, gas-solid separator (such as dust collector) is used to separate materials from air to ensure the quality of transported materials.，multifunctional, with functions such as Automatic control, material handling, Environmental protection and pollution-free, Closed conveying and Physical processing assistance，it has the characteristics of Economic and environmental protection, Long conveying distance, Save manpower, Stable operation and High reliability。

Pneumatic conveying of glass microbeads

Pneumatic conveying of glass microbeadsCan be fed from one place to many places for decentralized transportation.、PLC intelligent control, high degree of automation and simple operation.、Materials are transported in a closed pipeline.，No dust leakage, environmental protection and pollution-free, fully sealed and pollution-free transportation.、In the process of conveying, various technological operations can be carried out at the same time, such as grade.、Multi-point feeding and multi-point discharging can be realized, and remote operation can be realized.，features include Simple operation, Strong adaptability, Convenient maintenance, Convenient for material transportation and recovery. and energy saving and environmental protection。