Introduction to Oat transportation and pneumatic conveying working principle

Oat transportationis a kind of material conveying equipment that uses airflow as power to convey materials through pipeline system.，it is an ideal choice for customers to buy Oat transportation。

1、Brief introduction of Oat transportation

Oat transportationalso known as airflow transportation, is a way to transport granular materials along the airflow direction in a closed pipeline by using the energy of airflow.。

Oat transportation

2、Oat transportation use

The purpose of Oat transportation is introduced as follows:

1. Bulk material transportation

The Oat transportation is especially suitable for conveying powdery, granular and flowable bulk materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, pharmaceutical powder, etc. Through the Oat transportation, these materials can be efficiently transferred between different production links or equipment.

2. Long-distance and multipoint transportation

The Oat transportation system can realize long-distance material transportation and meet the demand of long-distance material transfer. At the same time, it can also realize multi-point transportation, that is, materials are collected from multiple locations and transported to a centralized point, or materials are dispersed from a centralized point to multiple locations. This flexibility makes Oat transportations have important application value in large factories and cross-regional material transportation.

3. Heating, cooling and drying

Heating, cooling or drying equipment can be installed in the Oat transportation pipeline to carry out necessary treatment of materials to meet the specific requirements in the production process.

4. material handling

Oat transportation system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

5. Multi-point transportation

The Oat transportation system can be flexibly configured to realize transportation from multiple centralized points to one centralized point, or from one centralized point to multiple centralized points, so as to meet the complex production layout requirements.

Oat transportation

3、Structural advantages of Oat transportation

The Oat transportation has the following structure

1. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Oat transportation system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

2. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

3. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

4. Air source device

The air source device is the power core of the Oat transportation system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

5. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

Oat transportation

4、Oat transportation application

Oat transportations have the following purposes.

1. Adapt to complex environment

The Oat transportation system can adapt to various complex environments and layout requirements. Whether in high temperature, high humidity, corrosive or flammable and explosive environment, the normal operation of the system can be ensured by selecting suitable materials and taking corresponding safety measures. In addition, the Oat transportation pipes can be flexibly arranged according to the actual situation of the production site, which makes the configuration of factory equipment more reasonable.

2. Reduce pollution

The Oat transportation system carries out material transportation in a fully enclosed state, which effectively reduces the environmental pollution caused by dust flying and material leakage.

3. Environmental protection and cleaner production

The Oat transportation process is carried out in a closed pipeline, which effectively prevents dust from flying and leaking, thus reducing environmental pollution and harm to employees' health. This is especially important for industries that need to maintain high cleanliness or dust-free environment.

4. cut down on energy consumption

Although the power consumption of the Oat transportation is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

5. Long distance transportation

The Oat transportation system can realize long-distance material transportation and meet the demand of long-distance material transfer. This is especially important for some large factories or cross-regional material transportation.

Oat transportation

5、Advantages of Oat transportation principle

Oat transportationthe principle is simple.Mainly based on aerodynamic force, the continuous and stable transportation of granular materials is realized in a closed pipeline by using the energy of airflow.，is a kind of high quality and low price Oat transportation，structure mainly includes: Air source system, control system, Bunker system, delivery system, Conveying pipeline system and so on，low in price。

Oat transportation

6、Introduction of advantages of Oat transportation

Oat transportations have the following advantages.

1. High conveying efficiency and low cost.

The Oat transportation can realize the continuous and efficient transportation of materials, which is not limited by the site and distance, and is especially suitable for long-distance and large-scale material transportation.

2. Multi-point to multi-point transportation

The Oat transportation system can realize multi-point to multi-point transportation, meet the needs of different production lines and improve the production flexibility.

3. Flexible layout

The conveying pipeline can be flexibly configured according to the actual layout of the factory, which makes the process configuration of the factory equipment more reasonable, optimizes the production process and improves the labor productivity.

4. Strong adaptability

The Oat transportation system can transport a variety of materials, including powdery, granular, fibrous and small block materials, and has strong adaptability. At the same time, for materials with unstable chemical properties, inert gas can also be used for transportation to ensure the stability of materials during transportation.

5. Various process operations can be realized.

The Oat transportation system can not only realize the transportation of materials, but also carry out various technological operations at the same time, such as mixing, crushing, grading, drying and cooling. This versatility makes Oat transportations widely used in many industries.

Oat transportation

Oat transportationis a kind of material conveying equipment which combines jet technology and fluidization technology.，Widely used in Environmental protection and cleaner production, Long-distance and multipoint transportation, Multi-point transportation, Long-distance and multipoint transportation and Dust removal and essence。