Introduction to Dry mud pneumatic conveying, introduction to Powder conveying function advantages and characteristics

Dry mud pneumatic conveyingis a technology that uses the energy of airflow to transport granular materials along the direction of airflow in a closed pipeline.，usually used in environmental protection, chemical industry, metallurgy, plastic, logistics and other fields，Structure consists of control system, dust pelletizing system, Air source system, Bunker system, delivery system and so on，productThe structural design is simple, novel and special.。The following is to introduce the Dry mud pneumatic conveying:

1、Brief introduction of Dry mud pneumatic conveying

Dry mud pneumatic conveyingis a kind of material conveying system which uses the energy of airflow to convey granular or powdery materials along the airflow direction in a closed pipeline.，in the course of work,Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline. In the process of transportation, gas-solid separator (such as dust collector) is used to separate materials from air to ensure the quality of transported materials.，is a Dry mud pneumatic conveying，favorable price。

Dry mud pneumatic conveying

2、Advantages of Dry mud pneumatic conveying principle

Dry mud pneumatic conveyingMainly based on aerodynamic force, the continuous and stable transportation of granular materials is realized in a closed pipeline by using the energy of airflow.，features include High degree of automation, Easy to use, Simple operation, Reliable equipment and easy installation，It has a wide range of uses, including Long distance transportation, Reduce pollution, Long-distance and multipoint transportation, Mixing and classification and Process assistance，the product looks atmospheric.，multifunctional, with functions such as Environmental protection and pollution-free, material handling, Automatic control, Closed conveying and Closed conveying。

Dry mud pneumatic conveying

3、Dry mud pneumatic conveying structure

The Dry mud pneumatic conveying structure is introduced as follows:

1. Air source device

The air source device is the power core of the Dry mud pneumatic conveying system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

2. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

3. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

4. Air source device

The air source device is the power core of the Dry mud pneumatic conveying system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

5. control system

The control system is the "brain" of the Dry mud pneumatic conveying system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

Dry mud pneumatic conveying

4、Dry mud pneumatic conveying use

The purpose of Dry mud pneumatic conveying is introduced as follows:

1. Mixing and classification

In the process of conveying, the Dry mud pneumatic conveying system can cooperate with other equipment to realize the mixing and grading operation of materials, and improve the production efficiency and product quality.

2. Long-distance and multipoint transportation

The Dry mud pneumatic conveying system can realize long-distance material transportation and meet the demand of long-distance material transfer. At the same time, it can also realize multi-point transportation, that is, materials are collected from multiple locations and transported to a centralized point, or materials are dispersed from a centralized point to multiple locations. This flexibility makes Dry mud pneumatic conveyings have important application value in large factories and cross-regional material transportation.

3. material handling

Dry mud pneumatic conveying system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

4. save energy and cut emissions

Although the Dry mud pneumatic conveying system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

5. Adapt to complex environment

The Dry mud pneumatic conveying system can adapt to various complex environments and layout requirements. Whether in high temperature, high humidity, corrosive or flammable and explosive environment, the normal operation of the system can be ensured by selecting suitable materials and taking corresponding safety measures. In addition, the Dry mud pneumatic conveying pipes can be flexibly arranged according to the actual situation of the production site, which makes the configuration of factory equipment more reasonable.

Dry mud pneumatic conveying

5、Dry mud pneumatic conveying advantage

The advantages of Dry mud pneumatic conveying are as follows:

1. Material quality protection

In the process of conveying, the Dry mud pneumatic conveying can prevent the materials from getting wet, soiled or mixed with other impurities, thus ensuring the quality of the conveyed materials.

2. be simple in structure

Dry mud pneumatic conveying has simple structure and convenient operation.

3. Low maintenance cost

The Dry mud pneumatic conveying system does not need a lot of mechanical equipment, so its maintenance cost is relatively small. In addition, in the process of use, it is only necessary to clean the pipeline regularly and keep it airtight.

4. Save space

Dry mud pneumatic conveying equipment usually occupies a small area and can make full use of space. This is especially important for factories or production lines with limited space, which can save valuable production space.

5. Strong adaptability

Dry mud pneumatic conveyings are suitable for conveying powdery, granular or flowable materials, and are suitable for many industries, such as chemical industry, building materials and food. And the Dry mud pneumatic conveying system can keep stable and continuous flow in long-distance transportation, thus meeting the production needs.

Dry mud pneumatic conveying

6、Dry mud pneumatic conveying working site

hyde powder provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the Dry mud pneumatic conveying production process and production site, and gain favorable comments and recognition from customers.。

Dry mud pneumatic conveying

As you can see from the live video.，hyde is a material conveying technology for conveying granular particles in a pipeline by means of compressed air flow.。

Dry mud pneumatic conveyingit can be used in building material, chemical plant, build a ship, building materials, building material and other industries，the product looks atmospheric.，In the process of transportation, various technological operations can be carried out at the same time, such as physical and chemical processes such as mix.、The pipeline layout is flexible, and it can be arranged according to the specific terrain.，meet the needs of material transportation、Materials are transported by closed pipelines.，It can reduce the pollution to the surrounding environment in the process of transportation, improve the production environment, facilitate safe production, and completely seal and transport without pollution.、The operation mode is flexible and changeable, and it can run continuously or regularly.、The conveying system is closed.，Effectively prevent materials from absorbing moisture, fouling or mixing with other impurities during transportation, and fully seal and transport without pollution.。