What is a Monocrystalline silicon transportation? Introduction to the Working Principle of pneumatic conveying system

Monocrystalline silicon transportationby forming a pressure difference along the pipeline, the air is moved to the area with lower pressure to realize the transportation of bulk materials.。

1、Brief introduction of Monocrystalline silicon transportation

Monocrystalline silicon transportationis a reliable material conveying system for conveying powdery materials under high pressure.，the product looks beautiful.，it has been widely used in environmental protection, cast, build a ship, metallurgy, building materials and other industries。

Monocrystalline silicon transportation

2、Introduction of advantages of Monocrystalline silicon transportation

The advantages of Monocrystalline silicon transportation are as follows:

1. Various process operations can be realized.

In the process of conveying, the Monocrystalline silicon transportation system can also perform physical operations such as heating, cooling, drying and airflow classification or some chemical operations at the same time, which increases the versatility of the system.

2. High degree of automation

The Monocrystalline silicon transportation system can realize automatic control and remote monitoring, which improves the automation level and production efficiency of the production process.

3. Structural construction

Monocrystalline silicon transportation has simple structure and convenient operation.

4. The quality of convey materials is ensure.

In the process of conveying, the Monocrystalline silicon transportation system can prevent the materials from being wetted, stained or mixed with other sundries, thus ensuring the quality of the conveyed materials.

5. Strong flexibility

The pipeline layout of the Monocrystalline silicon transportation is flexible, and it can be configured vertically, horizontally or curved to adapt to the complex production environment and space constraints. This flexibility makes the Monocrystalline silicon transportation system have great adaptability in the renovation and expansion of the factory.

Monocrystalline silicon transportation

3、Monocrystalline silicon transportation characteristics

Monocrystalline silicon transportationQuantitative transportation,Simple operation,High productivity,Convenient maintenance,It is convenient to realize mechanization。

Monocrystalline silicon transportation

4、Monocrystalline silicon transportation structure

The Monocrystalline silicon transportation structure is introduced as follows:

1. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

2. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

3. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

4. control system

The control system is the "brain" of the Monocrystalline silicon transportation system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

5. Air source device

The air source device is the power core of the Monocrystalline silicon transportation system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

Monocrystalline silicon transportation

5、Monocrystalline silicon transportation advantage

The advantages of Monocrystalline silicon transportation are as follows:

1. Low maintenance cost

The Monocrystalline silicon transportation system does not need a lot of mechanical equipment, so its maintenance cost is relatively small. In addition, in the process of use, it is only necessary to clean the pipeline regularly and keep it airtight.

2. Efficient continuous transportation

The Monocrystalline silicon transportation can realize the continuous and efficient transportation of materials, which is not limited by the site and distance, and is especially suitable for long-distance and large-scale material transportation.

3. Save space

Monocrystalline silicon transportation equipment usually occupies a small area and can make full use of space. This is especially important for factories or production lines with limited space, which can save valuable production space.

4. Strong adaptability

For materials with unstable chemical properties, the Monocrystalline silicon transportation system can use inert gas for transportation to ensure the stability of the materials during transportation.

5. Multi-point to multi-point transportation

The Monocrystalline silicon transportation system can realize multi-point to multi-point transportation, meet the needs of different production lines and improve the production flexibility.

Monocrystalline silicon transportation

6、Structural characteristics of Monocrystalline silicon transportation

The Monocrystalline silicon transportation has the following structure

1. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Monocrystalline silicon transportation system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

2. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

3. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

4. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

5. control system

The control system is the "brain" of the Monocrystalline silicon transportation system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

Monocrystalline silicon transportation

Monocrystalline silicon transportationis a common Monocrystalline silicon transportation，Commonly used inDust removal and essence,Multi-point transportation,Reduce pollution,Process assistance,Heating, cooling and drying and so on。