Introduction to Pneumatic conveying in glass factory, Powder pneumatic conveying specifications, model parameters

Pneumatic conveying in glass factoryis a method of conveying materials through pipelines by using air flow with a certain speed.，The conveying system is closed, which can prevent the materials from being affected with damp, soiled and mixed with other sundries in the conveying process, and ensure the conveying quality of the materials.，meet the needs of material transportation、PLC intelligent control, high degree of automation and simple operation.、The whole conveying process is sealed.，Less affected by climatic and environmental conditions, fully sealed and pollution-free transportation.、Not only can the materials from multiple feeding points be conveyed to the discharging point in turn, but also the materials from multiple feeding points can be conveyed to the discharging point at the same time.、In the process of conveying, various technological operations can be carried out at the same time, such as mix.，reliable quality，The price is relatively low.。The following is to introduce the Pneumatic conveying in glass factory:

1、Brief introduction of Pneumatic conveying in glass factory

Pneumatic conveying in glass factoryis a material conveying system that uses the pressure of gas to convey powder materials.。

Pneumatic conveying in glass factory

2、Introduction of Pneumatic conveying in glass factory characteristics

Pneumatic conveying in glass factoryit has the characteristics of High production efficiency, No secondary pollution, Convenient operation and management, High productivity and Can carry out long-distance dispersion transportation.，Widely used in Mixing and classification, Environmental protection and cleaner production, Reduce pollution, Heating, cooling and drying and Dust removal and essence，at runtime,It mainly uses the energy of airflow to transport granular materials along the airflow direction in a closed pipeline. It generates air flow with a certain pressure and speed by compressing air or other gases, and suspends materials in the air flow or forms a group to transport along the pipeline.，be loved by our customers.。

Pneumatic conveying in glass factory

3、Pneumatic conveying in glass factory advantage

The advantages of Pneumatic conveying in glass factory are as follows:

1. be of simple construction

The structure is relatively simple, mainly composed of conveying pipeline, air source equipment, control system, etc., and the maintenance is convenient.

2. The quality of convey materials is ensure.

In the process of conveying, the Pneumatic conveying in glass factory system can prevent the materials from being wetted, stained or mixed with other sundries, thus ensuring the quality of the conveyed materials.

3. be simple in structure

The structure is relatively simple and the operation is very convenient. It can be transported flexibly in horizontal, vertical or inclined directions to adapt to different production environments.

4. Easy to maintain

The Pneumatic conveying in glass factory device has the advantages of simple structure, few moving parts, convenient maintenance and reduced maintenance cost. At the same time, the equipment occupies a small area and can make full use of space.

5. Multi-point to multi-point transportation

The Pneumatic conveying in glass factory system can realize multi-point to multi-point transportation, meet the needs of different production lines and improve the production flexibility.

Pneumatic conveying in glass factory

4、Pneumatic conveying in glass factory working site

hyde provides customers with on-site high-definition video, fully demonstrates the advantages of on-site Pneumatic conveying in glass factoryt operation, and helps customers to deeply understand the product production process and production site, and gain favorable comments and recognition from customers.。

Pneumatic conveying in glass factory

As you can see from the live video.，Shandong Haide Fenti Engineering Co., Ltd. the main features are System modularization, Efficient and flexible, versatility, Large conveying capacity and Flexible conveying distance。

5、Structural advantages of Pneumatic conveying in glass factory

The Pneumatic conveying in glass factory has the following structure

1. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

2. Air source device

The air source device is the power core of the Pneumatic conveying in glass factory system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

3. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

4. control system

The control system is the "brain" of the Pneumatic conveying in glass factory system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

5. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

Pneumatic conveying in glass factory

6、company strength

The company has many years of Pneumatic conveying in glass factory manufacturing experience, large scale and strong strength.。

hyde

Pneumatic conveying in glass factorythe advantage is High conveying speed, good conveying quality and high conveying efficiency.，meet the needs of material transportation、Intermittent or continuous conveying, multi-point feeding and multi-point discharging, convenient and flexible, wide selection range, and long-distance operation.、Can realize the transportation of materials in a closed pipeline.，Not affected by environment, climate and other conditions, fully sealed and pollution-free transportation.、In the process of transportation, various technological operations can be carried out at the same time, such as physical and chemical processes such as dust.、Flexible pipeline layout, closed pipeline can be adjusted according to production conditions, which is relatively flexible.，It refers to a mode of transportation in which granular materials are continuously transported according to the specified route with the help of air energy (kinetic energy or static pressure energy) in the pipeline.，it has the functions of Automatic control, Explosion-proof involves, material handling, Environmental protection and pollution-free and Automatic control。