Introduction to Pneumatic conveying of furnace calcination ash, introduction to Material conveying advantages and characteristics

Pneumatic conveying of furnace calcination ashmainly uses the airflow generated by the fan to transport materials along the airflow direction in the closed conveying pipeline.，at runtime,Air flow is generated by compressed air or other gases, and a certain air flow speed and pressure are formed in the pipeline. These air currents suspend the material particles in it, or transport the materials along the pipeline in a group state. In this process, the material particles are in a liquid state under the action of airflow, so as to realize the continuous and stable transportation of materials.，is designed by hyde with advanced technology。

1、Brief introduction of Pneumatic conveying of furnace calcination ash

Pneumatic conveying of furnace calcination ashis a kind of material conveying system which uses airflow as power to convey materials through pipeline system.，is a Pneumatic conveying of furnace calcination ash，Widely used inBulk material transportation,material handling,Environmental protection and cleaner production,cut down on energy consumption,Multi-point transportation and so on，the product looks beautiful.，has been favored by more and more customers.。

Pneumatic conveying of furnace calcination ash

2、Pneumatic conveying of furnace calcination ash video live broadcast

hyde powder provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the product production process and production site, and gain favorable comments and recognition from customers.。

Pneumatic conveying of furnace calcination ash

As you can see from the live video.，Shandong Haide Fenti Engineering Co., Ltd. the advantage is The operation mode is flexible and changeable, and it can run continuously or regularly.、Closed pipeline transportation，It can reduce the pollution to the surrounding environment in the process of transportation, improve the production environment, facilitate safe production, and completely seal and transport without pollution.、Can be charged at one place, and then discharged at multiple places, and realize remote operation.、In the conveying process, various technological operations can be carried out at the same time.、Large conveying capacity, long conveying distance and high conveying quality.，meet the needs of material transportation。

3、Introduction of Pneumatic conveying of furnace calcination ash characteristics

Pneumatic conveying of furnace calcination ashit has the characteristics of automation, automation, Operation safety, Easy maintenance and Simple operation，the product looks atmospheric.，can be customized according to user's needs.。

Pneumatic conveying of furnace calcination ash

4、Pneumatic conveying of furnace calcination ash application

Pneumatic conveying of furnace calcination ashs have the following purposes.

1. Multi-point transportation

The Pneumatic conveying of furnace calcination ash system can be flexibly configured to realize transportation from multiple centralized points to one centralized point, or from one centralized point to multiple centralized points, so as to meet the complex production layout requirements.

2. cut down on energy consumption

Although the power consumption of the Pneumatic conveying of furnace calcination ash is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

3. Heating, cooling and drying

Heating, cooling or drying equipment can be installed in the Pneumatic conveying of furnace calcination ash pipeline to carry out necessary treatment of materials to meet the specific requirements in the production process.

4. Long distance transportation

The Pneumatic conveying of furnace calcination ash system can realize long-distance material transportation and meet the demand of long-distance material transfer. This is especially important for some large factories or cross-regional material transportation.

5. save energy and cut emissions

Although the Pneumatic conveying of furnace calcination ash system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

Pneumatic conveying of furnace calcination ash

5、Structural characteristics of Pneumatic conveying of furnace calcination ash

The Pneumatic conveying of furnace calcination ash structure is introduced as follows:

1. Air source device

The air source device is the power core of the Pneumatic conveying of furnace calcination ash system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

2. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

3. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Pneumatic conveying of furnace calcination ash system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

4. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

5. control system

The control system is the "brain" of the Pneumatic conveying of furnace calcination ash system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

Pneumatic conveying of furnace calcination ash

6、Pneumatic conveying of furnace calcination ash price

The Pneumatic conveying of furnace calcination ash price is introduced as follows:

1. Low cost of raw materials

The production cost determines the price. The production cost here mainly includes technology, materials, technology, manpower and other related factors, among which the technology content is high, and the cost is relatively high, but the performance will be better; The better the quality of raw materials, the greater the cost and the longer the overall life of the product; If the manufacturer has a rational manufacturing process and strict production management system, and can make full use of human and material resources, then it can reduce the waste of expenses and production costs to a great extent, and the Pneumatic conveying of furnace calcination ash just meets this condition, so as to ensure the high-tech content and high quality of products, it can also enjoy low prices.

2. select a qualified person

The quality of material selection is one of the main factors that directly affect the Pneumatic conveying of furnace calcination ash. If the quality of material selection is better, the price may be more expensive. Therefore, customers must first understand the quality of material selection before purchasing products, and then compare whether the quality and price match.

3. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

4. Brand strength

At present, there are various brands of Pneumatic conveying of furnace calcination ash in jinan, Shandong province. The performance, quality and after-sales of products under different brands are different, and the prices of Pneumatic conveying of furnace calcination ash are different.

5. geographical position

hyde has a geographical advantage, where the transportation is developed, the product transportation cost is low, and the price and consumption level are also low, which provides a good sales environment for Pneumatic conveying of furnace calcination ash.

Pneumatic conveying of furnace calcination ash

Pneumatic conveying of furnace calcination ashis a kind of high quality and low price Pneumatic conveying of furnace calcination ash，Mainly used forDust removal and essence,Mixing and classification,Process assistance,Heating, cooling and drying andcut down on energy consumption，Safe and reliable,The conveying speed is faster,Low energy consumption,Can make full use of space,Fast conveying speed。