Introduction to Fine chemical pneumatic conveying and Pneumatic conveying equipment advantages and features

Fine chemical pneumatic conveyingis a reliable material conveying system for conveying powdery materials under high pressure.，It is mostly used in Reduce pollution, Long distance transportation, Mixing and classification, Long-distance and multipoint transportation, Bulk material transportation, Environmental protection and cleaner production and so on。

1、Brief introduction of Fine chemical pneumatic conveying

Fine chemical pneumatic conveyingIt refers to a mode of transportation in which granular materials are continuously transported according to the specified route with the help of air energy (kinetic energy or static pressure energy) in the pipeline.，In the process of conveying, various technological operations can be carried out at the same time, such as dry.、The materials concentrated from several points can be sent to one place or sent to scattered points from one place.、The material is completely closed in the whole conveying process.，Not affected by environment, climate and other conditions, fully sealed and pollution-free transportation.、Large conveying capacity, long conveying distance and high conveying quality.，meet the needs of material transportation、In the conveying process, various technological operations can be carried out at the same time.，the product looks beautiful.。

Fine chemical pneumatic conveying

2、Functional advantages of Fine chemical pneumatic conveying

Fine chemical pneumatic conveyings have the following advantages.

1. Strong sealing

The conveying pipeline can be flexibly configured according to the actual layout of the factory, which makes the process configuration of the factory equipment more reasonable, optimizes the production process and improves the labor productivity.

2. Material quality protection

In the process of conveying, the Fine chemical pneumatic conveying can prevent the materials from getting wet, soiled or mixed with other impurities, thus ensuring the quality of the conveyed materials.

3. High conveying efficiency and low cost.

The continuity and high efficiency of the Fine chemical pneumatic conveying enable the materials to reach the destination quickly and accurately, reduce the waiting time and material accumulation, and thus improve the overall production efficiency.

4. Generality

Fine chemical pneumatic conveyings are suitable for conveying powdery, granular or flowable materials, and are suitable for many industries, such as chemical industry, building materials and food. And the Fine chemical pneumatic conveying system can keep stable and continuous flow in long-distance transportation, thus meeting the production needs.

5. Low maintenance cost

The Fine chemical pneumatic conveying device has simple structure and few moving parts, so the maintenance cost is relatively low. At the same time, because the transportation process is carried out in the closed pipeline, the occurrence of equipment wear and failure is reduced.

Fine chemical pneumatic conveying

3、Working principle of Fine chemical pneumatic conveying

Fine chemical pneumatic conveyingat the start of the operation,The material and air flow form a gas-solid two-phase flow to realize continuous and stable material transportation.，It has a wide range of uses, and is often used inLong-distance and multipoint transportation,Multi-point transportation,Dust removal and essence,Mixing and classification,Process assistance and so on，the advantage is Flexible pipeline layout, closed pipeline can be adjusted according to production conditions, which is relatively flexible.，meet the needs of material transportation、Single-point unloading and multi-point unloading can be realized, and remote operation can be realized.、The conveying system is closed, which can prevent the materials from being affected with damp, soiled and mixed with other sundries in the conveying process, and ensure the conveying quality of the materials.、Not only can materials be transported from multiple feed points to the discharge point in turn, but also materials can be transported from multiple feed points to the discharge point at the same time.、The conveying system is closed.，Reduce the diffusion of its dust in the air, fully sealed and pollution-free transportation.，is a conveying technology that uses the energy of airflow to convey granular materials along the airflow direction in a closed pipeline.，favorable price，reliable quality。

Fine chemical pneumatic conveying

4、Introduction of advantages of Fine chemical pneumatic conveying

Fine chemical pneumatic conveyings have the following advantages.

1. versatility

In the process of conveying, the Fine chemical pneumatic conveying system can also perform physical operations such as heating, cooling, drying and airflow classification or some chemical operations at the same time, which increases the versatility of the system.

2. Multi-point to multi-point transportation

The Fine chemical pneumatic conveying system can realize multi-point to multi-point transportation, meet the needs of different production lines and improve the production flexibility.

3. structure

The structure is relatively simple and the operation is very convenient. It can be transported flexibly in horizontal, vertical or inclined directions to adapt to different production environments.

4. Flexible pipeline configuration

The pipeline layout of the Fine chemical pneumatic conveying is flexible and can be flexibly configured according to the actual layout and process requirements of the factory. This flexibility enables the Fine chemical pneumatic conveying system to adapt to various complex production environments and meet different production needs.

5. Multi-point to multi-point transportation

The Fine chemical pneumatic conveying system can realize multi-point to multi-point transportation, meet the needs of different production lines and improve the production flexibility.

Fine chemical pneumatic conveying

5、Fine chemical pneumatic conveying structure composition

The Fine chemical pneumatic conveying has the following structure

1. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

2. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Fine chemical pneumatic conveying system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

3. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

4. Air source device

The air source device is the power core of the Fine chemical pneumatic conveying system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

5. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

Fine chemical pneumatic conveying

6、Fine chemical pneumatic conveying price

The Fine chemical pneumatic conveying price is introduced as follows:

1. service

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, hyde Fine chemical pneumatic conveying manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Fine chemical pneumatic conveying price can meet the purchasing needs of customers.

2. Model type

Different models will have different specifications, which will lead to greater differences in the comprehensive configuration of products, which will also lead to greater changes in prices.

3. market demand

The difference between the supply and demand of manufacturers and customers will also affect the Fine chemical pneumatic conveying price. When the demand of customers on the market increases and the supply of products by manufacturers is small, the Fine chemical pneumatic conveying price will increase with the increase of demand. On the contrary, when the supply of product manufacturers on the market exceeds the demand of customers, the Fine chemical pneumatic conveying price will decrease.

4. technology

Different manufacturers have different advanced technologies, different production processes and different performances, and the price difference is naturally quite large.

5. Different regions

There are differences in consumption levels in different regions, which directly affect the production and manufacturing costs of products. Generally speaking, the higher the consumption level, the higher the cost of producing products, and the higher the product cost, the higher the price naturally.

Fine chemical pneumatic conveying

Fine chemical pneumatic conveyingIt can be used for Multi-point transportation, material handling, material handling, Long distance transportation, cut down on energy consumption, Reduce pollution and so on，the advantage is The operation mode is flexible and changeable, and it can run continuously or regularly.、It is suitable for centralized transportation to one place, and the feeding point can be one or several.、The materials are completely sealed during transportation.，It can prevent the transported materials from being affected with damp, soiled or mixed with foreign matters, and it is completely sealed and pollution-free to transport.、In the process of transportation, various technological operations can be carried out at the same time, such as physical and chemical processes such as mix.、Can realize the transportation of materials in a closed pipeline.，Can effectively prevent moisture and sundries from polluting materials, fully sealed and pollution-free transportation.。