Introduction to Particle material conveying equipment, Powder conveying specifications, model parameters

Particle material conveying equipmentis an efficient and environment-friendly way to transport materials by using the energy of airflow.，The structural design is simple, novel and special.，Structure consists of dust pelletizing system, control system, Bunker system, delivery system, Air source system and so on，is a common Particle material conveying equipment。

1、Brief introduction of Particle material conveying equipment

Particle material conveying equipmentis a kind of material conveying equipment which combines jet technology and fluidization technology.。

Particle material conveying equipment

2、Particle material conveying equipment structure composition

The Particle material conveying equipment structure is introduced as follows:

1. Air source device

The air source device is the power core of the Particle material conveying equipment system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

2. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

3. control system

The control system is the "brain" of the Particle material conveying equipment system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

4. Air source device

The air source device is the power core of the Particle material conveying equipment system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

5. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Particle material conveying equipment system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

Particle material conveying equipment

3、Particle material conveying equipment principle

Particle material conveying equipmentthe principle is simple.Air flow is generated by compressed air or other gases, and a certain air flow speed and pressure are formed in the pipeline. These air currents suspend the material particles in it, or transport the materials along the pipeline in a group state. In this process, the material particles are in a liquid state under the action of airflow, so as to realize the continuous and stable transportation of materials.。

Particle material conveying equipment

4、Particle material conveying equipment use

Particle material conveying equipments have the following purposes.

1. Long-distance and multipoint transportation

The Particle material conveying equipment system can realize long-distance material transportation and meet the demand of long-distance material transfer. At the same time, it can also realize multi-point transportation, that is, materials are collected from multiple locations and transported to a centralized point, or materials are dispersed from a centralized point to multiple locations. This flexibility makes Particle material conveying equipments have important application value in large factories and cross-regional material transportation.

2. Process assistance

In some production processes, Particle material conveying equipments are not only used for conveying materials, but also as part of the process. For example, in the chemical and pharmaceutical industries, the Particle material conveying equipment system can cooperate with other equipment to realize process operations such as mixing, grading, drying and cooling of materials, and improve production efficiency and product quality.

3. Heating, cooling and drying

Heating, cooling or drying equipment can be installed in the Particle material conveying equipment pipeline to carry out necessary treatment of materials to meet the specific requirements in the production process.

4. cut down on energy consumption

Although the power consumption of the Particle material conveying equipment is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

5. material handling

Particle material conveying equipment system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

Particle material conveying equipment

5、Particle material conveying equipment working site

Speak directly with facts on the spot。

Particle material conveying equipment

As you can see from the live video.，hyde at runtime,Using the dynamic pressure and static pressure of air, the material particles are suspended in the airflow or transported in groups along the pipeline. The former is called material suspension transportation, and the latter is called material group transportation.。

6、Particle material conveying equipment price advantage

The Particle material conveying equipment price is introduced as follows:

1. Company size

hyde powder's scale and strength are relatively strong, the technology and technology of products produced by manufacturers are relatively advanced, and there is less waste of resources in the process of manufacturing, and the price of products will be relatively low.

2. quality

The condition of the product itself has a great influence on its price, and the cost of the product with excellent quality is higher, which will lead to the increase of the selling price of the product. Therefore, this is an important factor that causes the price fluctuation and change of the Particle material conveying equipment.

3. Service factor

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Particle material conveying equipment price and service can meet the actual needs of customers.

4. Product configuration difference

Products of the same style, different configurations, the product price is definitely different, therefore, the Particle material conveying equipment price is affected by the configuration, and the price varies.

5. Product technology

The more advanced the technology, the higher the price will be, otherwise the equipment price will be low, and users must pay attention to whether their own technology meets the production requirements when purchasing equipment.

Particle material conveying equipment

Particle material conveying equipmentIn the conveying process, various technological operations can be carried out at the same time.、High conveying speed, good conveying quality and high conveying efficiency.，meet the needs of material transportation、Multi-point feeding and multi-point discharging can be realized, and remote operation can be realized.、The conveying system is closed, which can prevent the materials from being affected with damp, soiled and mixed with other sundries in the conveying process, and ensure the conveying quality of the materials.，meet the needs of material transportation、Can realize the transportation of materials in a closed pipeline.，Less dust flying and spilling, good environmental sanitation conditions, complete sealing and pollution-free transportation.，features include Low energy consumption, Stable operation, Simple system, Quantitative transportation and Wide range of conveying materials。