Introduction to Automatic pneumatic conveying system, Pneumatic conveying equipment advantages, characteristics and principles

Automatic pneumatic conveying systemis a process of transporting bulk materials from one or more sources to one or more destinations by using airflow as a transport medium.，it is widely used in medicine, machine building, grain processing, cast, heat-engine plant and other industries。

1、Brief introduction of Automatic pneumatic conveying system

Automatic pneumatic conveying systemis a kind of material conveying system which uses the energy of airflow to convey granular or powdery materials along the airflow direction in a closed pipeline.，is a common Automatic pneumatic conveying system，The operation mode is flexible and changeable, and it can run continuously or regularly.、In the process of transportation, various technological operations can be carried out at the same time, such as physical and chemical processes such as mix.、Remote operation can be carried out from several points to one place in a centralized way or from one place to several points in a decentralized way.、Materials are transported by closed pipelines.，Can reduce the pollution to the surrounding environment during transportation, and is fully sealed and pollution-free for transportation.、Flexible pipeline layout, closed pipeline can be adjusted according to production conditions, which is relatively flexible.，meet the needs of material transportation。

Automatic pneumatic conveying system

2、On-site real shot of Automatic pneumatic conveying system

Automatic pneumatic conveying system high-definition picture display, all-round shooting without dead ends, for our customers to visit.。

Automatic pneumatic conveying system

Note: All the pictures in this article were taken by hyde manufacturer.。

3、Automatic pneumatic conveying system advantage

Automatic pneumatic conveying systems have the following advantages.

1. Convenient maintenance and easy automation.

The Automatic pneumatic conveying system device has the advantages of simple structure, few moving parts, convenient maintenance and reduced maintenance cost. At the same time, the equipment occupies a small area and can make full use of space.

2. Small floor space

Compared with the traditional mechanical transportation mode, the equipment and pipelines required by the Automatic pneumatic conveying system occupy a smaller area, which can make full use of the space and reduce the construction cost and floor space of the factory building.

3. High degree of automation

The Automatic pneumatic conveying system system can realize automatic control and remote monitoring, which improves the automation level and production efficiency of the production process.

4. Efficient continuous transportation

The Automatic pneumatic conveying system can convey materials continuously and stably, and the conveying speed is faster, which improves the production efficiency and conveying capacity.

5. be of simple construction

Automatic pneumatic conveying system has simple structure and convenient operation.

Automatic pneumatic conveying system

4、Automatic pneumatic conveying system characteristics

Automatic pneumatic conveying systemfeatures include Convenient for material transportation and recovery., be of simple construction, automation, System modularization and Convenient operation and management，the product looks beautiful.。

Automatic pneumatic conveying system

5、Automatic pneumatic conveying system structure

The Automatic pneumatic conveying system structure is introduced as follows:

1. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

2. control system

The control system is the "brain" of the Automatic pneumatic conveying system system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

3. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Automatic pneumatic conveying system system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

4. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

5. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

Automatic pneumatic conveying system

6、Automatic pneumatic conveying system price

The Automatic pneumatic conveying system price is introduced as follows:

1. market competition

When the market demand for Automatic pneumatic conveying system is relatively high, manufacturers will raise the price in order to get more profits. On the contrary, when the market demand for this product is low, manufacturers will lower the price in order to sell the remaining products as soon as possible.

2. Service factor

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Automatic pneumatic conveying system price and service can meet the actual needs of customers.

3. Overall configuration

There is a direct connection between configuration and specifications. Generally speaking, with different specifications, its configuration scheme will be different, and the selection of products' materials and parts will be different, so the sales price of products will be different. It is not difficult to see that the configuration and price of Automatic pneumatic conveying system are closely related. hyde powder has comprehensively measured the configuration and sales price of products when designing Automatic pneumatic conveying system, which not only ensures that the functions of products can meet the actual needs of customers, but also can be in terms of price.

4. Cost input

When it comes to cost, I believe everyone has heard the saying "You get what you want for a price", which shows that the upfront cost of a product is directly proportional to its value. The upfront cost is high, the value is high, the quality is good, and the price is naturally high. The less the cost is, the lower the price is, and the quality is not good.

5. technology content

The more advanced the technology, the higher the price will be, otherwise the equipment price will be low, and users must pay attention to whether their own technology meets the production requirements when purchasing equipment.

Automatic pneumatic conveying system

Automatic pneumatic conveying systemthe product looks atmospheric.，the main features are automation, Centralized transportation, Simple operation, versatility and omniseal。