What is a Positive pressure pneumatic conveying system? Introduction to the advantages, characteristics, and principles of the Pneumatic conveying equipment

Positive pressure pneumatic conveying systemis a kind of material conveying system which uses the energy of airflow to convey granular or powdery materials along the airflow direction in a closed pipeline.，is a popular Positive pressure pneumatic conveying system。

1、Brief introduction of Positive pressure pneumatic conveying system

Positive pressure pneumatic conveying systemis a kind of material conveying equipment which uses air flow energy to convey granular materials in a closed pipeline.，is a kind of Positive pressure pneumatic conveying system manufactured by hyde powder。

Positive pressure pneumatic conveying system

2、Positive pressure pneumatic conveying system use

The purpose of Positive pressure pneumatic conveying system is introduced as follows:

1. Multi-point transportation

The Positive pressure pneumatic conveying system system can be flexibly configured to realize transportation from multiple centralized points to one centralized point, or from one centralized point to multiple centralized points, so as to meet the complex production layout requirements.

2. Bulk material transportation

The Positive pressure pneumatic conveying system is especially suitable for conveying powdery, granular and flowable bulk materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, pharmaceutical powder, etc. Through the Positive pressure pneumatic conveying system, these materials can be efficiently transferred between different production links or equipment.

3. save energy and cut emissions

Although the Positive pressure pneumatic conveying system system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

4. cut down on energy consumption

Although the power consumption of the Positive pressure pneumatic conveying system is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

5. Process assistance

In some production processes, Positive pressure pneumatic conveying systems are not only used for conveying materials, but also as part of the process. For example, in the chemical and pharmaceutical industries, the Positive pressure pneumatic conveying system system can cooperate with other equipment to realize process operations such as mixing, grading, drying and cooling of materials, and improve production efficiency and product quality.

Positive pressure pneumatic conveying system

3、Positive pressure pneumatic conveying system real shot picture

Exquisite design, excellent material selection, reliable quality and high-definition pictures for our customers to visit.。

Positive pressure pneumatic conveying system

Note: All the pictures in this article were taken by hyde manufacturer.。

4、Structural advantages of Positive pressure pneumatic conveying system

The Positive pressure pneumatic conveying system has the following structure

1. control system

The control system is the "brain" of the Positive pressure pneumatic conveying system system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

2. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

3. Air source device

The air source device is the power core of the Positive pressure pneumatic conveying system system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

4. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

5. control system

The control system is the "brain" of the Positive pressure pneumatic conveying system system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

Positive pressure pneumatic conveying system

5、Positive pressure pneumatic conveying system function

Positive pressure pneumatic conveying systemit has the functions of Physical processing assistance, Explosion-proof involves, Closed conveying, Automatic control and Automatic control，can be customized according to user's needs.。

Positive pressure pneumatic conveying system

6、How to choose the right product manufacturer?

Choosing a suitable Positive pressure pneumatic conveying system manufacturer requires comprehensive consideration of many aspects. First of all, we should examine the strength of manufacturers, including production capacity, R&D team and industry experience. Strong manufacturers can better ensure product supply and innovation ability. Secondly, product quality is the key, and it is evaluated by product certification, material selection and manufacturing process to ensure the durability of products. Product performance can not be ignored, so we should choose manufacturers with matching technical parameters, rich types and customized services according to actual needs. After-sales service is equally important. Professional and timely service team, perfect after-sales content and extensive service network can make users worry about nothing. In addition, market reputation is also an important reference. We can understand the reputation and status of manufacturers through customer evaluation, industry reputation and award-winning honor. Finally, it is necessary to analyze the price and cost performance, and on the premise of ensuring the quality and performance, choose a manufacturer with reasonable price and high cost performance, so as to purchase Positive pressure pneumatic conveying system products that meet the demand and have good cost performance.。

hyde powder

Positive pressure pneumatic conveying systemmultifunctional, with functions such as Environmental protection and pollution-free, material handling, Closed conveying, Physical processing assistance and Explosion-proof involves，widely used incast,transportation,grain processing,chemical plant,medicine and other industries。