Copper oxide pneumatic conveying detailed introduction

Copper oxide pneumatic conveyingis a material conveying system that combines jet technology and fluidization technology.，Flexible pipeline layout, closed pipeline can be adjusted according to production conditions, which is relatively flexible.，meet the needs of material transportation、In the process of conveying, various technological operations can be carried out at the same time, such as dust.、The materials are completely sealed during transportation.，Less dust flying, meeting the requirements of environmental protection, fully sealed and pollution-free transportation.、Not only can the materials from multiple feeding points be conveyed to the discharging point in turn, but also the materials from multiple feeding points can be conveyed to the discharging point at the same time.、The conveying system is closed, which can prevent the materials from being affected with damp, soiled and mixed with other sundries in the conveying process, and ensure the conveying quality of the materials.，meet the needs of material transportation，it can be used in logistics, metallurgy, medicine, cast, environmental protection and other industries。

1、Brief introduction of Copper oxide pneumatic conveying

Copper oxide pneumatic conveyingis a technology to transport solid particulate materials through air flow.，Structure consists of dust pelletizing system, control system, Air source system, delivery system, Air source system and so on，Copper oxide pneumatic conveyingThe overall structural design is simple and novel.，It has a wide range of uses, including Bulk material transportation, Dust removal and essence, Reduce pollution, Process assistance and Long-distance and multipoint transportation，Reliable equipment,Long conveying distance,Can make full use of space,Economic and environmental protection,Wide range of conveying materials，features include The conveying speed is faster, Flexible conveying distance, Operation safety, The failure rate is low and Can carry out long-distance dispersion transportation.。

Copper oxide pneumatic conveying

2、Copper oxide pneumatic conveying display

A variety of series of Copper oxide pneumatic conveying pictures are displayed, with exquisite design, reliable quality and trustworthiness.。

Copper oxide pneumatic conveying

Note: All the pictures in this article were taken by hyde manufacturer.。

3、Structural characteristics of Copper oxide pneumatic conveying

The Copper oxide pneumatic conveying structure is introduced as follows:

1. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Copper oxide pneumatic conveying system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

2. Air source device

The air source device is the power core of the Copper oxide pneumatic conveying system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

3. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

4. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

5. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

Copper oxide pneumatic conveying

4、Copper oxide pneumatic conveying function

Copper oxide pneumatic conveyingmultifunctional, with functions such as Explosion-proof involves, Physical processing assistance, Environmental protection and pollution-free, material handling and Automatic control，is an advanced technology for conveying materials by aerodynamic force.。

Copper oxide pneumatic conveying

5、Copper oxide pneumatic conveying structure

The Copper oxide pneumatic conveying structure is introduced as follows:

1. Air source device

The air source device is the power core of the Copper oxide pneumatic conveying system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

2. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Copper oxide pneumatic conveying system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

3. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

4. control system

The control system is the "brain" of the Copper oxide pneumatic conveying system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

5. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

Copper oxide pneumatic conveying

Copper oxide pneumatic conveyingis a Copper oxide pneumatic conveying，It has the functions of material handling, Multi-point transportation, Long distance transportation, Long-distance and multipoint transportation and Process assistance。