Introduction to Particle pneumatic conveying, Powder conveying specifications, model parameters

Particle pneumatic conveyingis a reliable material conveying equipment for conveying powdery materials under high pressure.，is a Particle pneumatic conveying。

1、Brief introduction of Particle pneumatic conveying

Particle pneumatic conveyingis a material conveying system that uses the pressure of gas to convey powder materials.，Commonly used inProcess assistance,cut down on energy consumption,Dust removal and essence,Environmental protection and cleaner production,Bulk material transportation and so on，the product looks beautiful.，It is convenient to realize mechanization,easy installation,Fast conveying speed,omniseal,Convenient operation and management，is a Particle pneumatic conveying newly developed by hyde powder。

Particle pneumatic conveying

2、Introduction of Particle pneumatic conveying characteristics

Particle pneumatic conveyingfeatures include Centralized transportation, automation, The failure rate is low, Long conveying distance and Large conveying capacity，the principle is simple.Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline. In the process of transportation, gas-solid separator (such as dust collector) is used to separate materials from air to ensure the quality of transported materials.，the advantage is Can be charged at one place, and then discharged at multiple places, and realize remote operation.、In the conveying process, various technological operations can be carried out at the same time.、High conveying speed, good conveying quality and high conveying efficiency.，meet the needs of material transportation、In the process of transportation, various technological operations can be carried out at the same time, such as physical and chemical processes such as grade.、Not only can materials be transported from multiple feed points to the discharge point in turn, but also materials can be transported from multiple feed points to the discharge point at the same time, and remote operation can be realized.，the product looks atmospheric.，is a process of transporting bulk materials from one or more sources to one or more destinations by using airflow as a transport medium.。

Particle pneumatic conveying

3、Particle pneumatic conveying work site real shot

The finished products of the Particle pneumatic conveying factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

Particle pneumatic conveying

Note: All the pictures in this article were taken by hyde powder manufacturer.。

4、Particle pneumatic conveying HD real shot

The following is the live video of Particle pneumatic conveying designed and produced by hyde for users, from which we can see the The material is completely closed in the whole conveying process.，The material is not affected by the outside world and will not be wet or deteriorated. Not easy to leak, causing dust flying, fully sealed and pollution-free transportation.、PLC intelligent control, high degree of automation and simple operation.，meet the needs of material transportation、Flexible pipeline layout, closed pipeline can be adjusted according to production conditions, which is relatively flexible.、Multi-point feeding and multi-point discharging can be realized, and remote operation can be realized.、Can realize the transportation of materials in a closed pipeline.，Can effectively prevent moisture and sundries from polluting materials, fully sealed and pollution-free transportation. of hydeproduce的Particle pneumatic conveying.。

Particle pneumatic conveying

As you can see from the live video.，hyde powder the main features are Convenient maintenance, convenient to use, Easy to realize automation, High system reliability and Simple system。

5、Particle pneumatic conveying application

Particle pneumatic conveyings have the following purposes.

1. Mixing and classification

In the process of conveying, the Particle pneumatic conveying system can cooperate with other equipment to realize the mixing and grading operation of materials, and improve the production efficiency and product quality.

2. Multi-point transportation

The Particle pneumatic conveying system can be flexibly configured to realize transportation from multiple centralized points to one centralized point, or from one centralized point to multiple centralized points, so as to meet the complex production layout requirements.

3. Heating, cooling and drying

Heating, cooling or drying equipment can be installed in the Particle pneumatic conveying pipeline to carry out necessary treatment of materials to meet the specific requirements in the production process.

4. Long-distance and multipoint transportation

The Particle pneumatic conveying system can realize long-distance material transportation and meet the demand of long-distance material transfer. At the same time, it can also realize multi-point transportation, that is, materials are collected from multiple locations and transported to a centralized point, or materials are dispersed from a centralized point to multiple locations. This flexibility makes Particle pneumatic conveyings have important application value in large factories and cross-regional material transportation.

5. Heating, cooling and drying

Heating, cooling or drying equipment can be installed in the Particle pneumatic conveying pipeline to carry out necessary treatment of materials to meet the specific requirements in the production process.

Particle pneumatic conveying

6、Particle pneumatic conveying price

The Particle pneumatic conveying price is introduced as follows:

1. Product configuration difference

There is a direct connection between configuration and specifications. Generally speaking, with different specifications, its configuration scheme will be different, and the selection of products' materials and parts will be different, so the sales price of products will be different. It is not difficult to see that the configuration and price of Particle pneumatic conveying are closely related. hyde has comprehensively measured the configuration and sales price of products when designing Particle pneumatic conveying, which not only ensures that the functions of products can meet the actual needs of customers, but also can be in terms of price.

2. market factors

Some external factors, such as market conditions, economic situation, industry rules, supply-demand relationship, etc., will also lead to certain fluctuations in Particle pneumatic conveying prices, so this is also the main factor affecting prices.

3. raw material

Different manufacturers have different material selection standards. The better the quality of the selected materials, the more expensive the products will be. On the contrary, the prices will be low. However, to avoid customers being deceived, compare several products of the same specification and model before deciding to purchase.

4. Product technology

Different manufacturers have different advanced technologies, different production processes and different performances, and the price difference is naturally quite large.

5. service

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Particle pneumatic conveying price and service can meet the actual needs of customers.

Particle pneumatic conveying

Particle pneumatic conveyingat runtime,Mainly based on aerodynamic force, compressed air or other gases generate airflow, so that material particles are suspended in the airflow or transported in groups along the pipeline. In pressure transportation, high-pressure gas pushes materials to flow along the pipeline; In vacuum transportation, the material is sucked and transported to the target position through the negative pressure environment in the pipeline.，it has the characteristics of High reliability, Easy maintenance, Flexible layout, High conveying efficiency and automation。