What is a Closed pipeline pneumatic conveying system? Introduction to the advantages, characteristics, and principles of the Powder pneumatic conveying

Closed pipeline pneumatic conveying systemis a kind of material conveying equipment which uses air flow energy to convey granular materials in a closed pipeline.，at the start of the operation,Air flow is generated by compressed air or other gases, and a certain air flow speed and pressure are formed in the pipeline. These air currents suspend the material particles in it, or transport the materials along the pipeline in a group state. In this process, the material particles are in a liquid state under the action of airflow, so as to realize the continuous and stable transportation of materials.。The following is to introduce the Closed pipeline pneumatic conveying system:

1、Brief introduction of Closed pipeline pneumatic conveying system

Closed pipeline pneumatic conveying systemis a kind of material conveying equipment which uses the energy of airflow to convey granular or powdery materials along the airflow direction in a closed pipeline.，The operation mode is flexible and changeable, and it can run continuously or regularly.，meet the needs of material transportation、The materials concentrated from several points can be sent to one place or sent to scattered points from one place.、Flexible pipeline layout, closed pipeline can be adjusted according to production conditions, which is relatively flexible.，meet the needs of material transportation、Materials are transported by closed pipelines.，Less dust flying, meeting the requirements of environmental protection, fully sealed and pollution-free transportation.、In the process of conveying, various technological operations can be carried out at the same time, such as mix.，multifunctional, with functions such as Environmental protection and pollution-free, Closed conveying, Physical processing assistance, Automatic control and Explosion-proof involves。

Closed pipeline pneumatic conveying system

2、Closed pipeline pneumatic conveying system use

The purpose of Closed pipeline pneumatic conveying system is introduced as follows:

1. Bulk material transportation

The Closed pipeline pneumatic conveying system is especially suitable for conveying powdery, granular and flowable bulk materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, pharmaceutical powder, etc. Through the Closed pipeline pneumatic conveying system, these materials can be efficiently transferred between different production links or equipment.

2. Heating, cooling and drying

Heating, cooling or drying equipment can be installed in the Closed pipeline pneumatic conveying system pipeline to carry out necessary treatment of materials to meet the specific requirements in the production process.

3. material handling

Closed pipeline pneumatic conveying system system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

4. Reduce pollution

The Closed pipeline pneumatic conveying system system carries out material transportation in a fully enclosed state, which effectively reduces the environmental pollution caused by dust flying and material leakage.

5. Adapt to complex environment

The Closed pipeline pneumatic conveying system system can adapt to various complex environments and layout requirements. Whether in high temperature, high humidity, corrosive or flammable and explosive environment, the normal operation of the system can be ensured by selecting suitable materials and taking corresponding safety measures. In addition, the Closed pipeline pneumatic conveying system pipes can be flexibly arranged according to the actual situation of the production site, which makes the configuration of factory equipment more reasonable.

Closed pipeline pneumatic conveying system

3、Closed pipeline pneumatic conveying system application

Closed pipeline pneumatic conveying systems have the following purposes.

1. Long distance transportation

The Closed pipeline pneumatic conveying system system can realize long-distance material transportation and meet the demand of long-distance material transfer. This is especially important for some large factories or cross-regional material transportation.

2. save energy and cut emissions

Although the Closed pipeline pneumatic conveying system system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

3. Multi-point transportation

The Closed pipeline pneumatic conveying system system can be flexibly configured to realize transportation from multiple centralized points to one centralized point, or from one centralized point to multiple centralized points, so as to meet the complex production layout requirements.

4. Mixing and classification

In the process of conveying, the Closed pipeline pneumatic conveying system system can cooperate with other equipment to realize the mixing and grading operation of materials, and improve the production efficiency and product quality.

5. Process assistance

In some production processes, Closed pipeline pneumatic conveying systems are not only used for conveying materials, but also as part of the process. For example, in the chemical and pharmaceutical industries, the Closed pipeline pneumatic conveying system system can cooperate with other equipment to realize process operations such as mixing, grading, drying and cooling of materials, and improve production efficiency and product quality.

Closed pipeline pneumatic conveying system

4、Working principle of Closed pipeline pneumatic conveying system

Closed pipeline pneumatic conveying systemat work,The material and air flow form a gas-solid two-phase flow to realize continuous and stable material transportation.，the main features are Fast conveying speed, Centralized transportation, Flexible layout, Save manpower and Convenient operation and management，is a common Closed pipeline pneumatic conveying system。

Closed pipeline pneumatic conveying system

5、Closed pipeline pneumatic conveying system price concessions

The Closed pipeline pneumatic conveying system price is introduced as follows:

1. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

2. select a qualified person

The higher the cost of materials, the higher the price will be. In the process of purchasing products, users need to make a detailed understanding of the materials selected for products.

3. regional advantages

If the location of the manufacturer is superior, its transportation will be more convenient. hyde powder address:jinan has convenient transportation, which provides a good convenience for the transportation of Closed pipeline pneumatic conveying system.

4. product costs

The manufacturer has a fixed raw material supplier, so that the raw material price given by the raw material supplier to the manufacturer will be lower, the raw material cost invested by the manufacturer will be reduced, and the price of the Closed pipeline pneumatic conveying system will also be reduced.

5. model

Because the specifications and models of products are different, their specifications and configurations are not the same. As we all know, the cost of products with high configuration will be higher, and vice versa, because there is a close relationship between product sales price and specifications and models.

Closed pipeline pneumatic conveying system

6、Introduction of hyde Company

Shandong Haide Fenti Engineering Co., Ltd., located in shandong(Province), is a large Closed pipeline pneumatic conveying system manufacturer. The Closed pipeline pneumatic conveying system produced have good performance, low price, reasonable structure and excellent quality. The key is reasonable price. Welcome new and old customers to visit and buy.。

hyde powder

Closed pipeline pneumatic conveying systemis to transport granular materials along the direction of airflow in a closed pipeline by using the energy of airflow.，It is mostly used in Reduce pollution, Long distance transportation, Reduce pollution, Multi-point transportation, Process assistance, Mixing and classification and so on，features include The conveying speed is faster, No secondary pollution, Can carry out long-distance dispersion transportation., Long conveying distance and energy saving and environmental protection。