What is a Powder particle mixing and conveying system? Introduction to the Working Principle of Material conveying

Powder particle mixing and conveying systemis a method of conveying materials through pipelines by using air flow with a certain speed.，it is widely used in machine building, heat-engine plant, chemical industry, pharmaceutical factory, power and other industries，it is an ideal choice for customers to buy Powder particle mixing and conveying system。

1、Brief introduction of Powder particle mixing and conveying system

Powder particle mixing and conveying systemis a material conveying system that combines jet technology and fluidization technology.，the product looks atmospheric.，at the start of the operation,Mainly based on aerodynamic force, the continuous and stable transportation of granular materials is realized in a closed pipeline by using the energy of airflow.。

Powder particle mixing and conveying system

2、Powder particle mixing and conveying system application

Powder particle mixing and conveying systems have the following purposes.

1. Mixing and classification

In the process of conveying, the Powder particle mixing and conveying system system can cooperate with other equipment to realize the mixing and grading operation of materials, and improve the production efficiency and product quality.

2. material handling

Powder particle mixing and conveying system system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

3. Dust removal and purification

The Powder particle mixing and conveying system system is usually equipped with a dust collector to collect and treat the dust generated in the transportation process to keep the production environment clean and hygienic.

4. cut down on energy consumption

Although the power consumption of the Powder particle mixing and conveying system is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

5. Reduce pollution

The Powder particle mixing and conveying system system carries out material transportation in a fully enclosed state, which effectively reduces the environmental pollution caused by dust flying and material leakage.

Powder particle mixing and conveying system

3、Powder particle mixing and conveying system function

Powder particle mixing and conveying systemmultifunctional, with functions such as Physical processing assistance, Environmental protection and pollution-free, material handling, Automatic control and Automatic control，the product looks beautiful.，is a popular Powder particle mixing and conveying system，at work,The material and air flow form a gas-solid two-phase flow to realize continuous and stable material transportation.，the main features are Save manpower, Flexible conveying distance, Can make full use of space, automation and Convenient maintenance。

Powder particle mixing and conveying system

4、Powder particle mixing and conveying system field real shot

Exquisite design, excellent material selection, reliable quality and high-definition pictures for our customers to visit.。

Powder particle mixing and conveying system

Note: All the pictures in this article were taken by hyde manufacturer.。

5、Structural characteristics of Powder particle mixing and conveying system

The Powder particle mixing and conveying system structure is introduced as follows:

1. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

2. control system

The control system is the "brain" of the Powder particle mixing and conveying system system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

3. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

4. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

5. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Powder particle mixing and conveying system system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

Powder particle mixing and conveying system

Powder particle mixing and conveying systemIt has the functions of Bulk material transportation, Long distance transportation, Reduce pollution, Heating, cooling and drying and cut down on energy consumption，the main structure includes Bunker system, delivery system, Conveying pipeline system, dust pelletizing system and control system，productThe structural design is more advanced and reasonable.。