Introduction to Continuous quantitative conveying equipment and pneumatic conveying structure principle

Continuous quantitative conveying equipmentis a comprehensive technology, which involves fluid mechanics, material science, automation technology, manufacturing technology and other fields.，is a popular Continuous quantitative conveying equipment。

1、Brief introduction of Continuous quantitative conveying equipment

Continuous quantitative conveying equipmentis a material conveying technology for conveying granular particles in a pipeline by means of compressed air flow.。

Continuous quantitative conveying equipment

2、Continuous quantitative conveying equipment advantage

The advantages of Continuous quantitative conveying equipment are as follows:

1. Convenient maintenance and easy automation.

The Continuous quantitative conveying equipment device has simple structure and few moving parts, so the maintenance cost is relatively low. At the same time, because the transportation process is carried out in the closed pipeline, the occurrence of equipment wear and failure is reduced.

2. Material quality protection

In the process of conveying, the Continuous quantitative conveying equipment can prevent the materials from getting wet, soiled or mixed with other impurities, thus ensuring the quality of the conveyed materials.

3. Improve conveying efficiency

The Continuous quantitative conveying equipment system can transport materials continuously and stably, and the transportation speed is fast, which greatly improves the production efficiency and transportation capacity. Compared with other transportation modes, such as mechanical transportation or manual handling, Continuous quantitative conveying equipments can significantly reduce the stagnation time of materials in the transportation process and speed up the production process.

4. Save space

Compared with other transportation modes, the Continuous quantitative conveying equipment system occupies a small area and can make full use of space resources, especially suitable for use in factories or workshops with limited space.

5. energy saving and environmental protection

The whole process of the Continuous quantitative conveying equipment system is carried out in a closed state, so the secondary pollution of materials during transportation can be avoided.

Continuous quantitative conveying equipment

3、Continuous quantitative conveying equipment video

On-site aerial photography of Continuous quantitative conveying equipment。

Continuous quantitative conveying equipment

As you can see from the live video.，hyde features include Can reduce the labor intensity, Safe and reliable, Simple system, Operation safety and Easy maintenance。

4、Continuous quantitative conveying equipment function

Continuous quantitative conveying equipmentmultifunctional, with functions such as Automatic control, material handling, Explosion-proof involves, Physical processing assistance and Explosion-proof involves，usually used in medicine, environmental protection, grain processing, transportation, chemical industry and other fields，it mainly includes dust pelletizing system, delivery system, Bunker system, Air source system and delivery system，Continuous quantitative conveying equipmentThe overall structural design is simple and novel.，be loved by our customers.。

Continuous quantitative conveying equipment

5、Structural advantages of Continuous quantitative conveying equipment

The Continuous quantitative conveying equipment has the following structure

1. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Continuous quantitative conveying equipment system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

2. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

3. control system

The control system is the "brain" of the Continuous quantitative conveying equipment system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

4. Air source device

The air source device is the power core of the Continuous quantitative conveying equipment system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

5. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

Continuous quantitative conveying equipment

6、Continuous quantitative conveying equipment performance advantage

Continuous quantitative conveying equipments have the following advantages.

1. Flexible layout

The Continuous quantitative conveying equipment is carried out in a closed pipeline, which effectively prevents dust from flying and escaping. This fully enclosed transportation mode not only improves the working environment, reduces the risk of occupational diseases, but also reduces environmental pollution, and meets the requirements of modern enterprises for environmental protection.

2. Multiple process operations can be carried out at the same time

The Continuous quantitative conveying equipment system can not only realize the transportation of materials, but also carry out various technological operations at the same time, such as mixing, crushing, grading, drying and cooling. This versatility makes Continuous quantitative conveying equipments widely used in many industries.

3. High degree of automation

Modern Continuous quantitative conveying equipment systems are usually equipped with automatic control equipment, such as PLC control system, sensors, actuators, etc., which can realize remote monitoring and automatic adjustment. This highly automated transportation mode reduces labor costs and improves production efficiency and management convenience.

4. Multi-point to multi-point transportation

The Continuous quantitative conveying equipment system can realize multi-point to multi-point transportation, meet the needs of different production lines and improve the production flexibility.

5. High conveying efficiency and low cost.

The continuity and high efficiency of the Continuous quantitative conveying equipment enable the materials to reach the destination quickly and accurately, reduce the waiting time and material accumulation, and thus improve the overall production efficiency.

Continuous quantitative conveying equipment

Continuous quantitative conveying equipmentthe product looks beautiful.，is a kind of material conveying system which uses the energy of airflow to convey granular or powdery materials along the airflow direction in a closed pipeline.。