Introduction to Environmentally friendly dust-proof pneumatic conveying system, introduction to Pneumatic conveying equipment function advantages and characteristics

Environmentally friendly dust-proof pneumatic conveying systemis a method of conveying materials through pipelines by using air flow with a certain speed.，features include easy installation, The failure rate is low, Centralized transportation, omniseal and Flexible transmission line，it is widely used in plastic, transportation, metallurgy, build a ship and medicine，Commonly used inMulti-point transportation,Mixing and classification,Dust removal and essence,Reduce pollution,Bulk material transportation and so on，is a Environmentally friendly dust-proof pneumatic conveying system。

1、Brief introduction of Environmentally friendly dust-proof pneumatic conveying system

Environmentally friendly dust-proof pneumatic conveying systemis a technology that uses compressed air or aerodynamic force to transport materials from one point to another.。

Environmentally friendly dust-proof pneumatic conveying system

2、Environmentally friendly dust-proof pneumatic conveying system application

Environmentally friendly dust-proof pneumatic conveying systems have the following purposes.

1. save energy and cut emissions

Although the Environmentally friendly dust-proof pneumatic conveying system system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

2. cut down on energy consumption

Although the power consumption of the Environmentally friendly dust-proof pneumatic conveying system is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

3. material handling

Environmentally friendly dust-proof pneumatic conveying system system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

4. Heating, cooling and drying

Heating, cooling or drying equipment can be installed in the Environmentally friendly dust-proof pneumatic conveying system pipeline to carry out necessary treatment of materials to meet the specific requirements in the production process.

5. Process assistance

In some production processes, Environmentally friendly dust-proof pneumatic conveying systems are not only used for conveying materials, but also as part of the process. For example, in the chemical and pharmaceutical industries, the Environmentally friendly dust-proof pneumatic conveying system system can cooperate with other equipment to realize process operations such as mixing, grading, drying and cooling of materials, and improve production efficiency and product quality.

Environmentally friendly dust-proof pneumatic conveying system

3、Structural advantages of Environmentally friendly dust-proof pneumatic conveying system

The Environmentally friendly dust-proof pneumatic conveying system has the following structure

1. control system

The control system is the "brain" of the Environmentally friendly dust-proof pneumatic conveying system system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

2. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

3. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

4. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Environmentally friendly dust-proof pneumatic conveying system system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

5. control system

The control system is the "brain" of the Environmentally friendly dust-proof pneumatic conveying system system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

Environmentally friendly dust-proof pneumatic conveying system

4、Environmentally friendly dust-proof pneumatic conveying system working site

The following is the live video of Environmentally friendly dust-proof pneumatic conveying system designed and produced by hyde for users, from which we can see the the advantage is The operation mode is flexible and changeable, and it can run continuously or regularly.、Can realize the transportation of materials in a closed pipeline.，Not affected by environment, climate and other conditions, fully sealed and pollution-free transportation.、Not only can materials be transported from multiple feed points to the discharge point in turn, but also materials can be transported from multiple feed points to the discharge point at the same time.、In the process of conveying, various technological operations can be carried out at the same time, such as dust.、Large conveying capacity, long conveying distance and high conveying quality.，meet the needs of material transportation of hyde powderproduction and processing的Environmentally friendly dust-proof pneumatic conveying system.。

Environmentally friendly dust-proof pneumatic conveying system

As you can see from the live video.，Shandong Haide Fenti Engineering Co., Ltd. it has the characteristics of Reliable equipment, Long conveying distance, The conveying speed is faster, Reduce material loss and Various processes。

5、Functional advantages of Environmentally friendly dust-proof pneumatic conveying system

Environmentally friendly dust-proof pneumatic conveying systems have the following advantages.

1. Multi-point to multi-point transportation

The Environmentally friendly dust-proof pneumatic conveying system system can realize multi-point to multi-point transportation, meet the needs of different production lines and improve the production flexibility.

2. High degree of automation

The Environmentally friendly dust-proof pneumatic conveying system system is easy to realize automatic control.

3. Flexible pipeline configuration

The Environmentally friendly dust-proof pneumatic conveying system is carried out in a closed pipeline, which effectively reduces the flying and escape of dust, improves the working environment, reduces environmental pollution, and also protects materials from external pollution.

4. Multi-point to multi-point transportation

The Environmentally friendly dust-proof pneumatic conveying system system can realize multi-point to multi-point transportation, meet the needs of different production lines and improve the production flexibility.

5. Flexible configuration of conveying pipeline and optimization of process flow.

The conveying pipeline can be flexibly configured according to the factory layout and process requirements, and can meet the conveying requirements regardless of the horizontal, vertical or inclined direction. In addition, the Environmentally friendly dust-proof pneumatic conveying system system can be seamlessly connected with other production equipment to improve the overall production efficiency.

Environmentally friendly dust-proof pneumatic conveying system

Environmentally friendly dust-proof pneumatic conveying systemthe main structure includes Conveying pipeline system, delivery system, dust pelletizing system, dust pelletizing system, delivery system and so on，in the course of work,Mainly based on aerodynamic force, compressed air or other gases generate airflow, so that material particles are suspended in the airflow or transported in groups along the pipeline. In pressure transportation, high-pressure gas pushes materials to flow along the pipeline; In vacuum transportation, the material is sucked and transported to the target position through the negative pressure environment in the pipeline.。