What is a Loading pneumatic conveying equipment? Introduction to the advantages, characteristics, and principles of the Pneumatic conveying equipment

Loading pneumatic conveying equipmentis a kind of material conveying equipment which combines jet technology and fluidization technology.，the advantage is In the process of conveying, various technological operations can be carried out at the same time, such as be broken.、The materials are completely sealed during transportation.，Less dust flying, meeting the requirements of environmental protection, fully sealed and pollution-free transportation.、It is easy to realize the transportation engineering goal of multi-point feeding and multi-point unloading.、PLC intelligent control, high degree of automation and simple operation.，meet the needs of material transportation、In the conveying process, various technological operations can be carried out at the same time.，It has a wide range of uses, and is often used inLong distance transportation,cut down on energy consumption,Reduce pollution,Process assistance,Mixing and classification and so on，has been favored by more and more customers.。The following is to introduce the Loading pneumatic conveying equipment:

1、Brief introduction of Loading pneumatic conveying equipment

Loading pneumatic conveying equipmentis a process of transporting bulk materials from one or more sources to one or more destinations by using airflow as a transport medium.，at the start of the operation,Air flow is generated by compressed air or other gases, and a certain air flow speed and pressure are formed in the pipeline. These air currents suspend the material particles in it, or transport the materials along the pipeline in a group state. In this process, the material particles are in a liquid state under the action of airflow, so as to realize the continuous and stable transportation of materials.，is an advanced Loading pneumatic conveying equipment developed by our company in combination with the actual situation of the industry。

Loading pneumatic conveying equipment

2、Loading pneumatic conveying equipment use

The purpose of Loading pneumatic conveying equipment is introduced as follows:

1. Bulk material transportation

The Loading pneumatic conveying equipment is especially suitable for conveying powdery, granular and flowable bulk materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, pharmaceutical powder, etc. Through the Loading pneumatic conveying equipment, these materials can be efficiently transferred between different production links or equipment.

2. Reduce pollution

The Loading pneumatic conveying equipment system carries out material transportation in a fully enclosed state, which effectively reduces the environmental pollution caused by dust flying and material leakage.

3. save energy and cut emissions

Although the Loading pneumatic conveying equipment system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

4. Environmental protection and cleaner production

The Loading pneumatic conveying equipment process is carried out in a closed pipeline, which effectively prevents dust from flying and leaking, thus reducing environmental pollution and harm to employees' health. This is especially important for industries that need to maintain high cleanliness or dust-free environment.

5. Mixing and classification

In the process of conveying, the Loading pneumatic conveying equipment system can cooperate with other equipment to realize the mixing and grading operation of materials, and improve the production efficiency and product quality.

Loading pneumatic conveying equipment

3、Loading pneumatic conveying equipment structure composition

The Loading pneumatic conveying equipment has the following structure

1. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Loading pneumatic conveying equipment system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

2. Air source device

The air source device is the power core of the Loading pneumatic conveying equipment system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

3. control system

The control system is the "brain" of the Loading pneumatic conveying equipment system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

4. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

5. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Loading pneumatic conveying equipment system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

Loading pneumatic conveying equipment

4、Loading pneumatic conveying equipment function

Loading pneumatic conveying equipmentit has the functions of Automatic control, Environmental protection and pollution-free, Automatic control, Physical processing assistance and Explosion-proof involves，it has the characteristics of The conveying speed is faster, Strong adaptability, Easy maintenance, Flexible layout and Convenient maintenance，the product looks atmospheric.。

Loading pneumatic conveying equipment

5、Loading pneumatic conveying equipment real shot picture

Overview of high-definition pictures,the product looks beautiful.。

Loading pneumatic conveying equipment

Note: All the pictures in this article were taken by hyde manufacturer.。

6、Loading pneumatic conveying equipment price advantage

The Loading pneumatic conveying equipment price is introduced as follows:

1. raw material

The higher the cost of materials, the higher the price will be. In the process of purchasing products, users need to make a detailed understanding of the materials selected for products.

2. Cost input

The manufacturer has a fixed raw material supplier, so that the raw material price given by the raw material supplier to the manufacturer will be lower, the raw material cost invested by the manufacturer will be reduced, and the price of the Loading pneumatic conveying equipment will also be reduced.

3. geographical position

There are differences in consumption levels in different regions, which directly affect the production and manufacturing costs of products. Generally speaking, the higher the consumption level, the higher the cost of producing products, and the higher the product cost, the higher the price naturally.

4. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

5. service

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, hyde powder Loading pneumatic conveying equipment manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Loading pneumatic conveying equipment price can meet the purchasing needs of customers.

Loading pneumatic conveying equipment

Loading pneumatic conveying equipmentenergy saving and environmental protection,Convenient for material transportation and recovery.,Flexible pipeline layout,Convenient operation and management,It is convenient to realize mechanization，it has the structure of Air source system, Bunker system, Conveying pipeline system, dust pelletizing system and dust pelletizing system，This Loading pneumatic conveying equipmentThe structural design is more advanced and reasonable.，multifunctional, with functions such as Closed conveying, material handling, Environmental protection and pollution-free, material handling and Closed conveying。