Introduction to Stainless steel conveying, introduction to Powder conveying function advantages and characteristics

Stainless steel conveyingis a kind of technical integrated system that uses air or gas flow as conveying power to convey bulk solid materials in pipelines.。

1、Brief introduction of Stainless steel conveying

Stainless steel conveyingis a conveying system that uses airflow to convey powder and granular materials.，can be customized according to user's needs.。

Stainless steel conveying

2、Stainless steel conveying HD picture

Different specifications and models of high-definition pictures, so that everyone can see enough at once.。

Stainless steel conveying

Note: All the pictures in this article were taken by hyde powder manufacturer.。

3、Advantages of Stainless steel conveying principle

Stainless steel conveyingat the start of the operation,Mainly based on aerodynamic force, compressed air or other gases generate airflow, so that material particles are suspended in the airflow or transported in groups along the pipeline.，It uses the energy of airflow to transport powder materials along the airflow direction in a closed pipeline.。

Stainless steel conveying

4、Stainless steel conveying structure composition

The Stainless steel conveying has the following structure

1. control system

The control system is the "brain" of the Stainless steel conveying system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

2. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

3. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

4. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Stainless steel conveying system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

5. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

Stainless steel conveying

5、Introduction of advantages of Stainless steel conveying

Stainless steel conveyings have the following advantages.

1. Totally enclosed conveying

The conveying pipeline can be flexibly configured according to the actual layout of the factory, which makes the process configuration of the factory equipment more reasonable, optimizes the production process and improves the labor productivity.

2. Small floor space

Compared with the traditional mechanical transportation mode, the equipment and pipelines required by the Stainless steel conveying occupy a smaller area, which can make full use of the space and reduce the construction cost and floor space of the factory building.

3. Easy to maintain

The Stainless steel conveying system has relatively few moving parts, which makes the maintenance more convenient. At the same time, due to its structural characteristics, the system is easy to realize automatic control, which improves production efficiency and management convenience.

4. be of simple construction

The structure is relatively simple and the operation is very convenient. It can be transported flexibly in horizontal, vertical or inclined directions to adapt to different production environments.

5. Environmental protection and pollution-free

The Stainless steel conveying system is completely closed, which reduces the flying of dust and meets the requirements of environmental protection. This is especially important for those industries that require high environmental protection.

Stainless steel conveying

6、Stainless steel conveying price consultation

The Stainless steel conveying price is introduced as follows:

1. product configuration

Products of the same style, different configurations, the product price is definitely different, therefore, the Stainless steel conveying price is affected by the configuration, and the price varies.

2. Less intermediate links

hyde has long used the sales method of small profits but quick turnover to sell products, and the product price, market price and ex-factory price are the same. The purpose of this is to improve the sales volume of products and the visibility of enterprises.

3. select a qualified person

The higher the cost of materials, the higher the price will be. In the process of purchasing products, users need to make a detailed understanding of the materials selected for products.

4. mass discrepancy

Quality is the key factor to determine the price. A high-quality product requires a lot of manpower, material resources and raw materials, so the manufacturing cost of the product is high. Therefore, the price of high-quality products is high. On the contrary, the price of Stainless steel conveying is low.

5. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Stainless steel conveying have more or less differences in price.

Stainless steel conveying

Stainless steel conveyingthe advantage is In the conveying process, various technological operations can be carried out at the same time.、High conveying speed, good conveying quality and high conveying efficiency.、Can be transported from point to point or from point to point, and realize long-distance operation.、The conveying system is closed.，Effectively prevent materials from absorbing moisture, fouling or mixing with other impurities during transportation, and fully seal and transport without pollution.、In the process of conveying, various technological operations can be carried out at the same time, such as mix.，multifunctional, with functions such as Explosion-proof involves, material handling, Environmental protection and pollution-free, Closed conveying and Environmental protection and pollution-free。