Introduction to Fertilizer granule pneumatic conveying equipment, Powder pneumatic conveying specifications, model parameters

Fertilizer granule pneumatic conveying equipmentis a kind of technical integrated system that uses air or gas flow as conveying power to convey bulk solid materials in pipelines.，the advantage is High conveying speed, good conveying quality and high conveying efficiency.、Not only can the materials from multiple feeding points be conveyed to the discharging point in turn, but also the materials from multiple feeding points can be conveyed to the discharging point at the same time.、Materials are transported in a closed pipeline.，Less dust flying and spilling, good environmental sanitation conditions, complete sealing and pollution-free transportation.、Closed pipeline transportation，It can prevent the transported materials from being affected with damp, soiled or mixed with foreign matters, and it is completely sealed and pollution-free to transport.、Large conveying capacity, long conveying distance and high conveying quality.，meet the needs of material transportation，at work,Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline. In the process of transportation, gas-solid separator (such as dust collector) is used to separate materials from air to ensure the quality of transported materials.。

1、Brief introduction of Fertilizer granule pneumatic conveying equipment

Fertilizer granule pneumatic conveying equipmentis a material conveying technology for conveying granular particles in a pipeline by means of compressed air flow.，features include Operation safety, High reliability, omniseal, High productivity and Convenient operation and management。

Fertilizer granule pneumatic conveying equipment

2、Structural advantages of Fertilizer granule pneumatic conveying equipment

The Fertilizer granule pneumatic conveying equipment has the following structure

1. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

2. control system

The control system is the "brain" of the Fertilizer granule pneumatic conveying equipment system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

3. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

4. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

5. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Fertilizer granule pneumatic conveying equipment system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

Fertilizer granule pneumatic conveying equipment

3、Functional advantages of Fertilizer granule pneumatic conveying equipment

Fertilizer granule pneumatic conveying equipments have the following advantages.

1. Multi-point to multi-point transportation

The Fertilizer granule pneumatic conveying equipment system can realize multi-point to multi-point transportation, meet the needs of different production lines and improve the production flexibility.

2. Low maintenance cost

The Fertilizer granule pneumatic conveying equipment device has simple structure and few moving parts, so the maintenance cost is relatively low. At the same time, because the transportation process is carried out in the closed pipeline, the occurrence of equipment wear and failure is reduced.

3. energy saving and environmental protection

In the process of Fertilizer granule pneumatic conveying equipment opening, dust pollution and noise pollution will hardly occur, which is more environmentally friendly than traditional mechanical transportation.

4. High degree of automation

Modern Fertilizer granule pneumatic conveying equipment systems are usually equipped with automatic control equipment, such as PLC control system, sensors, actuators, etc., which can realize remote monitoring and automatic adjustment. This highly automated transportation mode reduces labor costs and improves production efficiency and management convenience.

5. Generality

The Fertilizer granule pneumatic conveying equipment system can transport a variety of materials, including powder, granular, fibrous and small block materials. In addition, for materials with unstable chemical properties, inert gas can also be used for transportation to ensure the stability and safety of materials during transportation. This wide adaptability makes Fertilizer granule pneumatic conveying equipments widely used in many industries.

Fertilizer granule pneumatic conveying equipment

4、Advantages of Fertilizer granule pneumatic conveying equipment principle

Fertilizer granule pneumatic conveying equipmentat the start of the operation,Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline.，In the process of conveying, various technological operations can be carried out at the same time, such as dry.、It can be sent from several points to one place in a centralized way, or from one place to several points in a decentralized way for long-distance operation.、Fully enclosed transportation system, materials are transported in closed pipes.，Can reduce the pollution to the surrounding environment during transportation, and is fully sealed and pollution-free for transportation.、In the process of conveying, various technological operations can be carried out at the same time, such as dry.、PLC intelligent control, high degree of automation and simple operation.，is an advanced Fertilizer granule pneumatic conveying equipment developed by our company in combination with the actual situation of the industry。

Fertilizer granule pneumatic conveying equipment

5、Video analysis of Fertilizer granule pneumatic conveying equipment

You can buy Fertilizer granule pneumatic conveying equipment according to your needs and show you product videos.。

Fertilizer granule pneumatic conveying equipment

As you can see from the live video.，Shandong Haide Fenti Engineering Co., Ltd. Structure consists of dust pelletizing system, Conveying pipeline system, Bunker system, control system, Air source system and so on。

6、hyde after-sales service

Perfect after-sales service is hyde powder's business policy. Our company has a professional after-sales service team, and all customer service personnel and maintenance technicians need pre-job training before they can take up their posts. Before the sale, there are customer service personnel to cooperate with customers to do a good job in product selection, and at the same time provide detailed information such as Fertilizer granule pneumatic conveying equipment price and technical parameters; During the sale, sign a formal purchase contract with the customer and do a good job in product inspection to prevent leakage and delay the start-up time of the customer; After sale, we will provide customers with free transportation, installation and post-maintenance work. At the same time, we will pay regular return visits to the use of products. Once problems are found, we will send technicians to deal with them in time, and always keep the interests of customers doubled.。

hyde

Fertilizer granule pneumatic conveying equipmentmultifunctional, with functions such as Automatic control, Explosion-proof involves, Environmental protection and pollution-free, Physical processing assistance and Closed conveying，at runtime,Mainly based on aerodynamic force, compressed air or other gases generate airflow, so that material particles are suspended in the airflow or transported in groups along the pipeline. In pressure transportation, high-pressure gas pushes materials to flow along the pipeline; In vacuum transportation, the material is sucked and transported to the target position through the negative pressure environment in the pipeline.。