What is a Coal slag particle conveying equipment? Introduction to the advantages, characteristics, and principles of the Powder pneumatic conveying

Coal slag particle conveying equipmentis a material conveying system that combines jet technology and fluidization technology.，it has the functions of Closed conveying, Environmental protection and pollution-free, material handling, Automatic control and Explosion-proof involves，the principle is simple.Mainly based on aerodynamic force, compressed air or other gases generate airflow, so that material particles are suspended in the airflow or transported in groups along the pipeline. In pressure transportation, high-pressure gas pushes materials to flow along the pipeline; In vacuum transportation, the material is sucked and transported to the target position through the negative pressure environment in the pipeline.，support customization。The following is to introduce the Coal slag particle conveying equipment:

1、Brief introduction of Coal slag particle conveying equipment

Coal slag particle conveying equipmentis a reliable material conveying equipment for conveying powdery materials under high pressure.。

Coal slag particle conveying equipment

2、Coal slag particle conveying equipment picture

Haide Coal slag particle conveying equipment manufacturing factory。

Coal slag particle conveying equipment

Note: All the pictures in this article were taken by hyde powder manufacturer.。

3、Coal slag particle conveying equipment principle

Coal slag particle conveying equipmentat work,Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline. In the process of transportation, gas-solid separator (such as dust collector) is used to separate materials from air to ensure the quality of transported materials.，is an advanced technology for conveying materials by aerodynamic force.，the advantage is Large conveying capacity, long conveying distance and high conveying quality.，meet the needs of material transportation、Materials are transported by closed pipelines.，No dust leakage, environmental protection and pollution-free, fully sealed and pollution-free transportation.、It can feed from one place to many places for decentralized transportation and realize long-distance operation.、In the process of transportation, various technological operations can be carried out at the same time, such as physical and chemical processes such as mix.、The conveying system is closed, which can prevent the materials from being affected with damp, soiled and mixed with other sundries in the conveying process, and ensure the conveying quality of the materials.。

Coal slag particle conveying equipment

4、Coal slag particle conveying equipment structure

The Coal slag particle conveying equipment structure is introduced as follows:

1. Air source device

The air source device is the power core of the Coal slag particle conveying equipment system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

2. control system

The control system is the "brain" of the Coal slag particle conveying equipment system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

3. Air source device

The air source device is the power core of the Coal slag particle conveying equipment system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

4. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Coal slag particle conveying equipment system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

5. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

Coal slag particle conveying equipment

5、Introduction of Coal slag particle conveying equipment characteristics

Coal slag particle conveying equipmentfeatures include Various processes, Strong adaptability, automation, High degree of automation and Economic and environmental protection，It can be sent from several points to one place in a centralized way, or from one place to several points in a decentralized way for long-distance operation.、The materials are completely sealed during transportation.，Less dust flying, meeting the requirements of environmental protection, fully sealed and pollution-free transportation.、In the process of conveying, various technological operations can be carried out at the same time, such as dust.、The pipeline layout is flexible, and it can be arranged according to the specific terrain.，meet the needs of material transportation、In the process of conveying, various technological operations can be carried out at the same time, such as cool.，in the course of work,It mainly uses the energy of airflow to transport granular materials along the airflow direction in a closed pipeline. It generates air flow with a certain pressure and speed by compressing air or other gases, and suspends materials in the air flow or forms a group to transport along the pipeline.，widely used inbuilding material,logistics,environmental protection,build a ship,heat-engine plant and other industries，it is an ideal choice for customers to buy Coal slag particle conveying equipment。

Coal slag particle conveying equipment

6、hyde workshop real shot

Speak directly with facts on the spot。

Coal slag particle conveying equipment

As you can see from the live video.hyde powder the main features are Wide range of conveying materials, Long conveying distance, omniseal, It is convenient to realize mechanization and Convenient maintenance。

Coal slag particle conveying equipmentthe product looks beautiful.，The operation mode is flexible and changeable, and it can run continuously or regularly.，meet the needs of material transportation、In the process of transportation, various technological operations can be carried out at the same time, such as physical and chemical processes such as grade.、Closed pipeline transportation，Not affected by environment, climate and other conditions, fully sealed and pollution-free transportation.、Multi-point feeding and multi-point discharging can be realized, and remote operation can be realized.、Large conveying capacity, long conveying distance and high conveying quality.，Mainly based on aerodynamic force, the continuous and stable transportation of granular materials is realized in a closed pipeline by using the energy of airflow.。