What is a Sawdust particle conveying system? How much is the price of the Powder pneumatic conveying?

Sawdust particle conveying systemis a kind of material conveying system which uses airflow as power to convey materials through pipeline system.，is a popular Sawdust particle conveying system，the product looks atmospheric.。The following is to introduce the Sawdust particle conveying system:

1、Brief introduction of Sawdust particle conveying system

Sawdust particle conveying systemis a technology that uses the energy of air flow to continuously convey powdery and granular materials.，support customization。

Sawdust particle conveying system

2、Sawdust particle conveying system structure composition

The Sawdust particle conveying system structure is introduced as follows:

1. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

2. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

3. control system

The control system is the "brain" of the Sawdust particle conveying system system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

4. Air source device

The air source device is the power core of the Sawdust particle conveying system system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

5. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

Sawdust particle conveying system

3、Functional advantages of Sawdust particle conveying system

Sawdust particle conveying systems have the following advantages.

1. versatility

While conveying materials, the Sawdust particle conveying system system can also complete a variety of production processes, such as mixing, crushing, grading, drying, cooling, etc., which improves production efficiency and added value of products.

2. High degree of automation

The Sawdust particle conveying system system is easy to realize automatic control and can be operated through the central console, which reduces the labor cost and improves the production efficiency and management convenience.

3. High conveying efficiency and low cost.

The Sawdust particle conveying system can convey materials continuously and stably, and the conveying speed is faster, which improves the production efficiency and conveying capacity.

4. High degree of automation

The Sawdust particle conveying system system is easy to realize automatic control.

5. Save space

Sawdust particle conveying system equipment usually occupies a small area and can make full use of space. This is especially important for factories or production lines with limited space, which can save valuable production space.

Sawdust particle conveying system

4、On-site real shot of Sawdust particle conveying system

Provide high-definition Sawdust particle conveying system real shot, a variety of specifications and models for customers to visit.。

Sawdust particle conveying system

Note: All the pictures in this article were taken by hyde manufacturer.。

5、Sawdust particle conveying system quotation

The Sawdust particle conveying system price is introduced as follows:

1. cost of production

When the Sawdust particle conveying system is produced, the materials selected by different manufacturers will be different. Some manufacturers use high-quality materials, and the price will be relatively high, while some manufacturers use ordinary materials, and the price will be lower.

2. Manufacturer scale

Direct selling by manufacturers and sales by middlemen will also affect product prices. There are not too many links among direct selling products, so the cost required by manufacturers is low, and the price of Sawdust particle conveying system is low. Customers can also put products into production in advance. On the contrary, when purchasing products from middlemen, there are not only many links, but also the price of Sawdust particle conveying system is much higher, so customers should choose products directly sold by manufacturers when purchasing.

3. regional difference

The consumption level in different regions is different, which directly affects the equipment cost investment. Generally speaking, the higher the consumption level, the higher the cost of production equipment, and the higher the cost investment, the higher the price naturally.

4. After-sales service level

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Sawdust particle conveying system price and service can meet the actual needs of customers.

5. Cost input

When the Sawdust particle conveying system is manufactured, the materials selected by different manufacturers will be different. Some manufacturers use high-quality materials, and the price will be relatively high, while some manufacturers use ordinary materials, and the price will be lower.

Sawdust particle conveying system

6、Brief introduction of hyde powder

hyde is a professional manufacturer of Powder pneumatic conveying, which produces Sawdust particle conveying system with the advantage is Multi-point feeding and multi-point discharging are possible.、Flexible pipeline layout, closed pipeline can be adjusted according to production conditions, which is relatively flexible.、The whole conveying process is sealed.，It can prevent the material from spreading, with high quality, complete sealing and pollution-free transportation.、High conveying speed, good conveying quality and high conveying efficiency.，meet the needs of material transportation、The materials collected from several points can be sent to one place or one place to scattered points, and remote operation can be realized. and reasonable prices. Welcome new and old customers to visit and buy. Click online consultation。

hyde powder

Sawdust particle conveying systemis a material conveying system which uses the energy of airflow to convey granular materials in a closed pipeline.，the principle is simple.Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline. In the process of transportation, gas-solid separator (such as dust collector) is used to separate materials from air to ensure the quality of transported materials.。