What is a Activated carbon particle pneumatic conveying system? Introduction to the advantages and characteristics of pneumatic conveying functions

Activated carbon particle pneumatic conveying systemis a technology that uses compressed air or aerodynamic force to transport materials from one point to another.，generally, it is composed of Bunker system, Air source system, control system, dust pelletizing system, Air source system and other major components，The material and air flow form a gas-solid two-phase flow to realize continuous and stable material transportation.。

1、Brief introduction of Activated carbon particle pneumatic conveying system

Activated carbon particle pneumatic conveying systemIt refers to a mode of transportation in which granular materials are continuously transported according to the specified route with the help of air energy (kinetic energy or static pressure energy) in the pipeline.，is a common Activated carbon particle pneumatic conveying system，the advantage is Large conveying capacity, long conveying distance and high conveying quality.、Intermittent or continuous conveying, multi-point feeding and multi-point discharging, convenient and flexible, and wide selection range.、In the process of conveying, various technological operations can be carried out at the same time, such as smash.、The conveying system is closed, which can prevent the materials from being affected with damp, soiled and mixed with other sundries in the conveying process, and ensure the conveying quality of the materials.、Fully enclosed transportation system, materials are transported in closed pipes.，Reduce the diffusion of its dust in the air, fully sealed and pollution-free transportation.，Mainly used forMulti-point transportation,Bulk material transportation,Heating, cooling and drying,Environmental protection and cleaner production andDust removal and essence，multifunctional, with functions such as Closed conveying, material handling, Environmental protection and pollution-free, Explosion-proof involves and Explosion-proof involves。

Activated carbon particle pneumatic conveying system

2、Structural characteristics of Activated carbon particle pneumatic conveying system

The Activated carbon particle pneumatic conveying system has the following structure

1. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Activated carbon particle pneumatic conveying system system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

2. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

3. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

4. Air source device

The air source device is the power core of the Activated carbon particle pneumatic conveying system system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

5. control system

The control system is the "brain" of the Activated carbon particle pneumatic conveying system system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

Activated carbon particle pneumatic conveying system

3、Working principle of Activated carbon particle pneumatic conveying system

Activated carbon particle pneumatic conveying systemin the course of work,It mainly uses the energy of airflow to transport granular materials along the airflow direction in a closed pipeline. It generates air flow with a certain pressure and speed by compressing air or other gases, and suspends materials in the air flow or forms a group to transport along the pipeline.，the main structure includes Conveying pipeline system, delivery system, Bunker system, dust pelletizing system, Bunker system and so on，productThe overall structural design is simple, diverse and beautiful.，it has the functions of Environmental protection and pollution-free, material handling, Physical processing assistance, Closed conveying and Automatic control，is a popular Activated carbon particle pneumatic conveying system，support customization。

Activated carbon particle pneumatic conveying system

4、Activated carbon particle pneumatic conveying system use

The purpose of Activated carbon particle pneumatic conveying system is introduced as follows:

1. save energy and cut emissions

Although the Activated carbon particle pneumatic conveying system system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

2. Dust removal and purification

The Activated carbon particle pneumatic conveying system system is usually equipped with a dust collector to collect and treat the dust generated in the transportation process to keep the production environment clean and hygienic.

3. Multi-point transportation

The Activated carbon particle pneumatic conveying system system can be flexibly configured to realize transportation from multiple centralized points to one centralized point, or from one centralized point to multiple centralized points, so as to meet the complex production layout requirements.

4. Adapt to complex environment

The Activated carbon particle pneumatic conveying system system can adapt to various complex environments and layout requirements. Whether in high temperature, high humidity, corrosive or flammable and explosive environment, the normal operation of the system can be ensured by selecting suitable materials and taking corresponding safety measures. In addition, the Activated carbon particle pneumatic conveying system pipes can be flexibly arranged according to the actual situation of the production site, which makes the configuration of factory equipment more reasonable.

5. cut down on energy consumption

Although the power consumption of the Activated carbon particle pneumatic conveying system is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

Activated carbon particle pneumatic conveying system

5、Activated carbon particle pneumatic conveying system price consultation

The Activated carbon particle pneumatic conveying system price is introduced as follows:

1. Configuration difference

The difference in Activated carbon particle pneumatic conveying system configuration will affect the product cost price. The higher the configuration, the higher the product cost price and the higher the overall selling price of the product. It is suggested that customers should compare whether the configuration is in line with the quotation when purchasing products, and compare more companies.

2. Company size

Our factory is a direct selling manufacturer of Activated carbon particle pneumatic conveying system, with independent production and processing facilities, few circulation links and low circulation cost.

3. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

4. Self quality

The price of Activated carbon particle pneumatic conveying system is affected by the quality of products. Only when the products are of good quality can we create greater profits for customers and recover the costs for customers as soon as possible. However, products with good quality have a lot of investment in technology, manpower and time, so their prices are higher than those of ordinary products. On the contrary, the products of general quality are equal in effort and gain, and the sales price is also low. But there are exceptions. Many manufacturers often adopt the mode of small profits but quick turnover. If customers can choose products with high cost performance, it is a good choice for long-term investment.

5. market quotation

Market supply and demand is the inevitable law of market development, with more market supply, less demand and lower product prices; The market supply is small, and people's demand is large. "Things are scarce and expensive", the product price will increase accordingly, and the price of hyde Activated carbon particle pneumatic conveying system will also conform to this market law.

Activated carbon particle pneumatic conveying system

6、Company service

Users should not only consider the quality, performance and price factors when buying Activated carbon particle pneumatic conveying system, but also consider the after-sales service of manufacturers. Good after-sales service can reduce many unnecessary troubles for customers. hyde powder manufacturers always adhere to the service attitude of "customer is God", implement high-standard and high-quality after-sales service attitude, conduct regular customer satisfaction surveys, and strictly supervise the quality of after-sales service, so as to relieve customers' purchase worries and make buyers completely worry-free.。

hyde

Activated carbon particle pneumatic conveying systemis a kind of high quality and low price Activated carbon particle pneumatic conveying system，It is mostly used in Reduce pollution, Long-distance and multipoint transportation, Mixing and classification, Long distance transportation, Heating, cooling and drying, cut down on energy consumption and so on。