What is a Molybdenum powder conveying system? Introduction to the Working Principle of pneumatic conveying system

Molybdenum powder conveying systemis a kind of technology integrated material conveying equipment which uses air (or gas) flow as conveying power to convey bulk solid materials in pipelines.，the advantage is The material is completely closed in the whole conveying process.，Effectively prevent materials from absorbing moisture, fouling or mixing with other impurities during transportation, and fully seal and transport without pollution.、The operation mode is flexible and changeable, and it can run continuously or regularly.、In the conveying process, various technological operations can be carried out at the same time.、Materials are transported in a closed pipeline.，Can reduce the pollution to the surrounding environment during transportation, and is fully sealed and pollution-free for transportation.、Not only can the materials from multiple feeding points be conveyed to the discharging point in turn, but also the materials from multiple feeding points can be conveyed to the discharging point at the same time.。The following is to introduce the Molybdenum powder conveying system:

1、Brief introduction of Molybdenum powder conveying system

Molybdenum powder conveying systemis a conveying technology that uses the energy of airflow to convey granular materials along the airflow direction in a closed pipeline.，is designed by hyde with advanced technology。

Molybdenum powder conveying system

2、Molybdenum powder conveying system characteristics

Molybdenum powder conveying systemEasy maintenance,Convenient operation and management,Avoid material pollution,versatility,Less maintenance.。

Molybdenum powder conveying system

3、Molybdenum powder conveying system use

The purpose of Molybdenum powder conveying system is introduced as follows:

1. Reduce pollution

The Molybdenum powder conveying system system carries out material transportation in a fully enclosed state, which effectively reduces the environmental pollution caused by dust flying and material leakage.

2. material handling

Molybdenum powder conveying system system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

3. Heating, cooling and drying

Heating, cooling or drying equipment can be installed in the Molybdenum powder conveying system pipeline to carry out necessary treatment of materials to meet the specific requirements in the production process.

4. Mixing and classification

In the process of conveying, the Molybdenum powder conveying system system can cooperate with other equipment to realize the mixing and grading operation of materials, and improve the production efficiency and product quality.

5. Multi-point transportation

The Molybdenum powder conveying system system can be flexibly configured to realize transportation from multiple centralized points to one centralized point, or from one centralized point to multiple centralized points, so as to meet the complex production layout requirements.

Molybdenum powder conveying system

4、Molybdenum powder conveying system customer scene picture

Molybdenum powder conveying system specifications and models are complete, and customers can choose at will. High-definition pictures are available for customers' reference. Customers are welcome to visit our factory.。

Molybdenum powder conveying system

Note: All the pictures in this article were taken by hyde powder manufacturer.。

5、Structural advantages of Molybdenum powder conveying system

The Molybdenum powder conveying system has the following structure

1. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

2. Air source device

The air source device is the power core of the Molybdenum powder conveying system system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

3. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

4. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Molybdenum powder conveying system system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

5. control system

The control system is the "brain" of the Molybdenum powder conveying system system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

Molybdenum powder conveying system

6、hyde company discount

Molybdenum powder conveying system is a new type of pneumatic conveying system introduced by hyde manufacturer, which has a wide range of applications, complete structural design and high working efficiency. It is an ideal equipment for environmental protection and other industries. Now consult hydeproduce的Molybdenum powder conveying system, you can enjoy the discount, and there are many activities for you, such as full reduction and full reduction。

hyde powder

Molybdenum powder conveying systemit has the characteristics of Can carry out long-distance dispersion transportation., High system reliability, Quantitative transportation, System modularization and easy installation，mainly based on aerodynamic force, granular materials are transported along the airflow direction in a closed pipeline by using the energy of airflow.，is a common Molybdenum powder conveying system。