Introduction to Clay sand conveying system and Pneumatic conveying equipment advantages and features

Clay sand conveying systemmainly based on aerodynamic force, granular materials are transported along the airflow direction in a closed pipeline by using the energy of airflow.。The following is to introduce the Clay sand conveying system:

1、Brief introduction of Clay sand conveying system

Clay sand conveying systemis a kind of material conveying equipment that uses airflow as power to convey materials through pipeline system.，at the start of the operation,Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline. In the process of transportation, gas-solid separator (such as dust collector) is used to separate materials from air to ensure the quality of transported materials.。

Clay sand conveying system

2、Clay sand conveying system characteristics

Clay sand conveying systemomniseal,Efficient and flexible,Convenient for material transportation and recovery.,be of simple construction,Quantitative transportation。

Clay sand conveying system

3、Clay sand conveying system structure

The Clay sand conveying system structure is introduced as follows:

1. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

2. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Clay sand conveying system system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

3. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

4. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

5. Air source device

The air source device is the power core of the Clay sand conveying system system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

Clay sand conveying system

4、Structural advantages of Clay sand conveying system

The Clay sand conveying system has the following structure

1. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Clay sand conveying system system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

2. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

3. control system

The control system is the "brain" of the Clay sand conveying system system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

4. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

5. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Clay sand conveying system system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

Clay sand conveying system

5、Clay sand conveying system HD real shot

High-definition picture display of Clay sand conveying system, excellent material selection, reliable quality and trustworthy.。

Clay sand conveying system

Note: All the pictures in this article were taken by hyde powder manufacturer.。

Clay sand conveying systemthe main features are automation, Strong adaptability, automation, automation and It is convenient to realize mechanization，is a concrete application of fluidization technology to transport granular materials along the direction of airflow in a closed pipeline by using the energy of airflow.，generally, it is composed of control system, Bunker system, Conveying pipeline system, Air source system, control system and other major components。