What is a Measurement feeding pneumatic conveying? Introduction to the principle of pneumatic conveying structure

Measurement feeding pneumatic conveyingIt uses air energy to continuously convey powder and bulk materials.。

1、Brief introduction of Measurement feeding pneumatic conveying

Measurement feeding pneumatic conveyingIt uses the energy of airflow to transport powder materials along the airflow direction in a closed pipeline.。

Measurement feeding pneumatic conveying

2、Measurement feeding pneumatic conveying use

The purpose of Measurement feeding pneumatic conveying is introduced as follows:

1. Long distance transportation

The Measurement feeding pneumatic conveying system can realize long-distance material transportation and meet the demand of long-distance material transfer. This is especially important for some large factories or cross-regional material transportation.

2. Bulk material transportation

The Measurement feeding pneumatic conveying is especially suitable for conveying powdery, granular and flowable bulk materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, pharmaceutical powder, etc. Through the Measurement feeding pneumatic conveying, these materials can be efficiently transferred between different production links or equipment.

3. Mixing and classification

In the process of conveying, the Measurement feeding pneumatic conveying system can cooperate with other equipment to realize the mixing and grading operation of materials, and improve the production efficiency and product quality.

4. material handling

Measurement feeding pneumatic conveying system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

5. Multi-point transportation

The Measurement feeding pneumatic conveying system can be flexibly configured to realize transportation from multiple centralized points to one centralized point, or from one centralized point to multiple centralized points, so as to meet the complex production layout requirements.

Measurement feeding pneumatic conveying

3、Measurement feeding pneumatic conveying function

Measurement feeding pneumatic conveyingmultifunctional, with functions such as Automatic control, Closed conveying, Explosion-proof involves, Physical processing assistance and material handling，it has the characteristics of Convenient operation and management, Good dustproof effect, It is convenient to realize mechanization, High productivity and be of simple construction，is designed by hyde powder with advanced technology。

Measurement feeding pneumatic conveying

4、Introduction of advantages of Measurement feeding pneumatic conveying

Measurement feeding pneumatic conveyings have the following advantages.

1. Totally enclosed conveying

The pipeline layout of the Measurement feeding pneumatic conveying is flexible, and it can be configured vertically, horizontally or curved to adapt to the complex production environment and space constraints. This flexibility makes the Measurement feeding pneumatic conveying system have great adaptability in the renovation and expansion of the factory.

2. Strong adaptability

The Measurement feeding pneumatic conveying system can be suitable for all kinds of loose, dry and non-sticky materials, especially for some environmentally sensitive materials such as inflammable, explosive, toxic and harmful, and smelly, and can realize safe and reliable transportation.

3. Multi-point to multi-point transportation

The Measurement feeding pneumatic conveying system can realize multi-point to multi-point transportation, meet the needs of different production lines and improve the production flexibility.

4. High degree of automation

The Measurement feeding pneumatic conveying system is easy to realize automatic control and can be operated through the central console, which reduces the labor cost and improves the production efficiency and management convenience.

5. High conveying efficiency

The Measurement feeding pneumatic conveying system uses gas to convey materials, which has high conveying speed and capacity and can realize continuous and efficient transportation.

Measurement feeding pneumatic conveying

5、Structural characteristics of Measurement feeding pneumatic conveying

The Measurement feeding pneumatic conveying structure is introduced as follows:

1. control system

The control system is the "brain" of the Measurement feeding pneumatic conveying system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

2. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

3. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Measurement feeding pneumatic conveying system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

4. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

5. Air source device

The air source device is the power core of the Measurement feeding pneumatic conveying system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

Measurement feeding pneumatic conveying

6、Measurement feeding pneumatic conveying price advantage

The Measurement feeding pneumatic conveying price is introduced as follows:

1. product model

There are many specifications and models of Measurement feeding pneumatic conveying, and different specifications and models must have different production processes. Moreover, the capital spent on the production of large-sized products must be much more than that of small-sized products, so the price of large-sized products is relatively high.

2. technology content

The more advanced the technology, the higher the price will be, otherwise the equipment price will be low, and users must pay attention to whether their own technology meets the production requirements when purchasing equipment.

3. cost of production

If the cost of the product is high, the selling price of the product will be high, so the cost input is an important factor that causes the price change of the Measurement feeding pneumatic conveying.

4. raw material

The raw materials used by different manufacturers will also be different. The better the raw materials, the better the quality and performance of the products and the higher the price. On the contrary, the products made of ordinary materials have low production costs and much lower prices.

5. Configuration level

If the comprehensive configuration of the product is higher, the selling price of the product will be higher, otherwise the price will be lower, so there is a close relationship between the configuration level and the price.

Measurement feeding pneumatic conveying

Measurement feeding pneumatic conveyingis a technology to transport solid particulate materials through air flow.，it is widely used in grain processing, building material, medicine, building material, grain processing and other industries。