Introduction to Loess pneumatic conveying system, Powder conveying specifications, model parameters

Loess pneumatic conveying systemis a reliable material conveying equipment for conveying powdery materials under high pressure.，at work,It mainly uses the energy of airflow to transport granular materials along the airflow direction in a closed pipeline. It generates air flow with a certain pressure and speed by compressing air or other gases, and suspends materials in the air flow or forms a group to transport along the pipeline.，super quality and competitive price。The following is to introduce the Loess pneumatic conveying system:

1、Brief introduction of Loess pneumatic conveying system

Loess pneumatic conveying systemthat is, the technology of conveying granular materials in closed pipes by air flow.，it has the functions of Physical processing assistance, material handling, Physical processing assistance, Explosion-proof involves and Environmental protection and pollution-free。

Loess pneumatic conveying system

2、Loess pneumatic conveying system structure

The Loess pneumatic conveying system structure is introduced as follows:

1. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

2. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

3. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Loess pneumatic conveying system system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

4. control system

The control system is the "brain" of the Loess pneumatic conveying system system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

5. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

Loess pneumatic conveying system

3、Working principle of Loess pneumatic conveying system

Loess pneumatic conveying systemat runtime,Air flow is generated by compressed air or other gases, and a certain air flow speed and pressure are formed in the pipeline. These air currents suspend the material particles in it, or transport the materials along the pipeline in a group state. In this process, the material particles are in a liquid state under the action of airflow, so as to realize the continuous and stable transportation of materials.，The overall structural design is relatively simple，the main structure includes delivery system, control system, dust pelletizing system, Conveying pipeline system, Bunker system and so on。

Loess pneumatic conveying system

4、Loess pneumatic conveying system use

The purpose of Loess pneumatic conveying system is introduced as follows:

1. Bulk material transportation

The Loess pneumatic conveying system is especially suitable for conveying powdery, granular and flowable bulk materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, pharmaceutical powder, etc. Through the Loess pneumatic conveying system, these materials can be efficiently transferred between different production links or equipment.

2. cut down on energy consumption

Although the power consumption of the Loess pneumatic conveying system is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

3. Long distance transportation

The Loess pneumatic conveying system system can realize long-distance material transportation and meet the demand of long-distance material transfer. This is especially important for some large factories or cross-regional material transportation.

4. Dust removal and purification

The Loess pneumatic conveying system system is usually equipped with a dust collector to collect and treat the dust generated in the transportation process to keep the production environment clean and hygienic.

5. material handling

Loess pneumatic conveying system system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

Loess pneumatic conveying system

5、Introduction of advantages of Loess pneumatic conveying system

The advantages of Loess pneumatic conveying system are as follows:

1. Small floor space

Compared with the traditional mechanical transportation mode, the equipment and pipelines required by the Loess pneumatic conveying system occupy a smaller area, which can make full use of the space and reduce the construction cost and floor space of the factory building.

2. Structural construction

The structure is relatively simple, mainly composed of conveying pipeline, air source equipment, control system, etc., and the maintenance is convenient.

3. energy saving and environmental protection

The conveying process is carried out in a closed pipeline, which effectively prevents dust from flying and escaping, reduces environmental pollution, improves the working environment and is conducive to protecting the health of production personnel.

4. Improve conveying efficiency

The Loess pneumatic conveying system system uses gas to convey materials, which has high conveying speed and capacity and can realize continuous and efficient transportation.

5. High degree of automation

Loess pneumatic conveying systems can realize the automation of transportation process through program control and automation technology. In the whole transportation process, there is no need for manual intervention, and the degree of automation is very high.

Loess pneumatic conveying system

6、Loess pneumatic conveying system price

The Loess pneumatic conveying system price is introduced as follows:

1. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

2. regional difference

hyde the site is located at:jinan, Shandong province, the transportation here is developed and convenient, and the products can be transported to the designated place in a short time, which saves customers a sum of transportation expenses.

3. Brand strength

At present, there are various brands of Loess pneumatic conveying system in jinan. The performance, quality and after-sales of products under different brands are different, and the prices of Loess pneumatic conveying system are different.

4. Product technology

The more advanced the technology, the higher the price will be, otherwise the equipment price will be low, and users must pay attention to whether their own technology meets the production requirements when purchasing equipment.

5. Manufacturer's strength

Our factory is a direct selling manufacturer of Loess pneumatic conveying system, with independent production and processing facilities, few circulation links and low circulation cost.

Loess pneumatic conveying system

Loess pneumatic conveying systemOperation safety,automation,Centralized transportation,Economic and environmental protection,convenient to use，is a common Loess pneumatic conveying system，is a kind of material conveying system which uses the energy of airflow to convey granular or powdery materials along the airflow direction in a closed pipeline.。