Introduction to Three element material conveying system and pneumatic conveying working principle

Three element material conveying systemis an efficient and environment-friendly way to transport materials by using the energy of airflow.，it is mainly composed of control system, Bunker system, Bunker system, Conveying pipeline system and delivery system，productThe structural design is simple, novel and special.，Mainly based on aerodynamic force, compressed air or other gases generate airflow, so that material particles are suspended in the airflow or transported in groups along the pipeline. In pressure transportation, high-pressure gas pushes materials to flow along the pipeline; In vacuum transportation, the material is sucked and transported to the target position through the negative pressure environment in the pipeline.，It has the functions of Reduce pollution, material handling, Multi-point transportation, Long-distance and multipoint transportation and Environmental protection and cleaner production，support customization。

1、Brief introduction of Three element material conveying system

Three element material conveying systemis a concrete application of fluidization technology to transport granular materials along the direction of airflow in a closed pipeline by using the energy of airflow.，multifunctional, with functions such as Physical processing assistance, Automatic control, Explosion-proof involves, material handling and Environmental protection and pollution-free，can be customized according to user's needs.。

Three element material conveying system

2、Three element material conveying system use

The purpose of Three element material conveying system is introduced as follows:

1. save energy and cut emissions

Although the Three element material conveying system system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

2. material handling

Three element material conveying system system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

3. Mixing and classification

In the process of conveying, the Three element material conveying system system can cooperate with other equipment to realize the mixing and grading operation of materials, and improve the production efficiency and product quality.

4. cut down on energy consumption

Although the power consumption of the Three element material conveying system is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

5. Bulk material transportation

The Three element material conveying system is especially suitable for conveying powdery, granular and flowable bulk materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, pharmaceutical powder, etc. Through the Three element material conveying system, these materials can be efficiently transferred between different production links or equipment.

Three element material conveying system

3、Introduction of Three element material conveying system characteristics

Three element material conveying systemit has the characteristics of Can reduce the labor intensity, Flexible transmission line, Quantitative transportation, convenient to use and No secondary pollution，multifunctional, with functions such as Physical processing assistance, Closed conveying, Automatic control, Explosion-proof involves and material handling。

Three element material conveying system

4、Three element material conveying system structure composition

The Three element material conveying system has the following structure

1. control system

The control system is the "brain" of the Three element material conveying system system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

2. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

3. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

4. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

5. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Three element material conveying system system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

Three element material conveying system

5、Three element material conveying system function

Three element material conveying systemit has the functions of Environmental protection and pollution-free, Closed conveying, Physical processing assistance, Automatic control and material handling，is a Three element material conveying system，be loved by our customers.。

Three element material conveying system

Three element material conveying systemThe overall structural design is simple, diverse and beautiful.，it is mainly composed of Air source system, control system, dust pelletizing system, Bunker system and dust pelletizing system，the product looks atmospheric.。