What is a Rice pneumatic conveying system? Introduction to the Working Principle of pneumatic conveying

Rice pneumatic conveying systemis a technology that uses compressed air or aerodynamic force to transport materials from one point to another.，it has the functions of Automatic control, Physical processing assistance, Environmental protection and pollution-free, Physical processing assistance and Closed conveying。

1、Brief introduction of Rice pneumatic conveying system

Rice pneumatic conveying systemis a method of conveying materials through pipelines by using air flow with a certain speed.，be loved by our customers.。

Rice pneumatic conveying system

2、Rice pneumatic conveying system principle

Rice pneumatic conveying systemat runtime,Mainly based on aerodynamic force, compressed air or other gases generate airflow, so that material particles are suspended in the airflow or transported in groups along the pipeline. In pressure transportation, high-pressure gas pushes materials to flow along the pipeline; In vacuum transportation, the material is sucked and transported to the target position through the negative pressure environment in the pipeline.，customizable。

Rice pneumatic conveying system

3、Rice pneumatic conveying system use

The purpose of Rice pneumatic conveying system is introduced as follows:

1. Reduce pollution

The Rice pneumatic conveying system system carries out material transportation in a fully enclosed state, which effectively reduces the environmental pollution caused by dust flying and material leakage.

2. save energy and cut emissions

Although the Rice pneumatic conveying system system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

3. material handling

Rice pneumatic conveying system system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

4. Mixing and classification

In the process of conveying, the Rice pneumatic conveying system system can cooperate with other equipment to realize the mixing and grading operation of materials, and improve the production efficiency and product quality.

5. Adapt to complex environment

The Rice pneumatic conveying system system can adapt to various complex environments and layout requirements. Whether in high temperature, high humidity, corrosive or flammable and explosive environment, the normal operation of the system can be ensured by selecting suitable materials and taking corresponding safety measures. In addition, the Rice pneumatic conveying system pipes can be flexibly arranged according to the actual situation of the production site, which makes the configuration of factory equipment more reasonable.

Rice pneumatic conveying system

4、Rice pneumatic conveying system use

The purpose of Rice pneumatic conveying system is introduced as follows:

1. Process assistance

In some production processes, Rice pneumatic conveying systems are not only used for conveying materials, but also as part of the process. For example, in the chemical and pharmaceutical industries, the Rice pneumatic conveying system system can cooperate with other equipment to realize process operations such as mixing, grading, drying and cooling of materials, and improve production efficiency and product quality.

2. Long-distance and multipoint transportation

The Rice pneumatic conveying system system can realize long-distance material transportation and meet the demand of long-distance material transfer. At the same time, it can also realize multi-point transportation, that is, materials are collected from multiple locations and transported to a centralized point, or materials are dispersed from a centralized point to multiple locations. This flexibility makes Rice pneumatic conveying systems have important application value in large factories and cross-regional material transportation.

3. Multi-point transportation

The Rice pneumatic conveying system system can be flexibly configured to realize transportation from multiple centralized points to one centralized point, or from one centralized point to multiple centralized points, so as to meet the complex production layout requirements.

4. save energy and cut emissions

Although the Rice pneumatic conveying system system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

5. Bulk material transportation

The Rice pneumatic conveying system is especially suitable for conveying powdery, granular and flowable bulk materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, pharmaceutical powder, etc. Through the Rice pneumatic conveying system, these materials can be efficiently transferred between different production links or equipment.

Rice pneumatic conveying system

5、Rice pneumatic conveying system price concessions

The Rice pneumatic conveying system price is introduced as follows:

1. Company size

Reliable manufacturers can produce excellent products, and such manufacturers have high comprehensive credibility and can design products in all directions. Therefore, compared with other manufacturers, such products have higher scientific and technological content and more functions. hyde powder's reputation and products are very high, and it is a trustworthy big brand and manufacturer.

2. raw material

The higher the cost of materials, the higher the price will be. In the process of purchasing, customers need to make a detailed understanding of the materials selected for manufacturing products.

3. Cost input

When it comes to cost, I believe everyone has heard the saying "You get what you want for a price", which shows that the upfront cost of a product is directly proportional to its value. The upfront cost is high, the value is high, the quality is good, and the price is naturally high. The less the cost is, the lower the price is, and the quality is not good.

4. type of operation

If there is no middleman to earn the difference, then the Rice pneumatic conveying system price will naturally decrease. hyde adopts the business model of "self-production and self-marketing" to sell products, thus realizing "one-on-one" sales, so the comprehensive price of our products is relatively high.

5. Product technology

Each customer needs different products, wants to achieve different purposes, and has different product technical design. The higher or more advanced the technical requirements, the more the product cost will be, and the price will increase with the increase of cost. On the contrary, the price will be cheaper.

Rice pneumatic conveying system

6、Introduction of hyde powder Company

hyde, as one of the professional and powerful Rice pneumatic conveying system manufacturers in jinan, Shandong province, produces Rice pneumatic conveying system with reliable quality, affordable price and perfect after-sales, which have been successfully practiced in many processing plants at home and abroad.。

hyde powder

Rice pneumatic conveying systemThe structural design is more advanced and reasonable.，generally, it is composed of Bunker system, Bunker system, control system, delivery system, Air source system and other major components，the product looks beautiful.。