Introduction to Electric feeder, introduction to Feeder advantages and characteristics

Electric feederis an excellent quantitative supply equipment designed for the purpose of supplying powder.，the principle is simple.The driving device drives the rotor to rotate in the cylindrical casing, and the material falls from the upper hopper, which is filled in the spaces between the blades and discharged with the rotation of the blades to the lower part. The side of the machine body is provided with a pressure equalizing exhaust port, which can exhaust the high-pressure gas brought by the rotation of the impeller, reduce the phenomenon of gas ejection, and facilitate the smooth falling of materials.，widely used inmine,building materials,chemical industry,grain processing,plastic metallurgy and other industries。The following is to introduce the Electric feeder:

1、Brief introduction of Electric feeder

Electric feederis an efficient and flexible material conveying equipment.，It has a wide range of uses, including equipment feeding, material handling, ensure air tightness of the system, dust removal equipment discharges dust. and blowing-in，it is an ideal choice for customers to buy Electric feeder。

Electric feeder

2、Electric feeder performance advantage

Electric feeders have the following advantages.

1. High wear resistance

The key components inside the equipment, such as impeller and bushing, are made of excellent materials and have high wear resistance, which can meet the needs of long-term and high-strength material transportation.

2. Strong overload capacity

Low impact inertia force, suitable for frequent starting and reverse rotation.

3. Smooth operation and low noise.

Uniform and stable feeding process, stable discharging operation, low noise, few faults and long service life.

4. Flexible adjustment

Some Electric feeders are equipped with variable frequency governors, which can adjust the rotating speed of the impeller according to the actual demand, thus flexibly controlling the conveying quantity of materials.

5. Anti-leakage design

The bearing and gear box are far away from the valve body to avoid the influence of high temperature dust. At the same time, the front and rear end covers have good sealing performance, which effectively prevents dust from leaking out and prolongs the service life of moving parts and lubrication systems.

Electric feeder

3、Electric feeder real beat

The panoramic shooting of hyde powder Electric feeder is shown as follows.。

Electric feeder

Note: All the pictures in this article were taken by hyde manufacturer.。

4、Electric feeder structure

The Electric feeder structure is introduced as follows:

1. Rotor and shell

The rotor is the core component of the Electric feeder, and usually consists of several blades, which rotate in the cylindrical casing. Materials fall from the upper hopper and are filled in the spaces between the blades. With the rotation of the impeller, they are transported to the lower part and discharged from the shell to protect the internal mechanism and seal, and prevent the leakage of materials and the entry of external impurities.

2. impeller

Impeller is the key part of the Electric feeder to realize material transportation. Its structural design is reasonable, which can ensure the uniform distribution of materials in the spaces between the impellers and be transported smoothly with the rotation of the impellers.

3. Equalizing exhaust port

The side of the Electric feeder body is provided with a pressure equalizing exhaust port, which can exhaust the high-pressure gas brought by the rotation of the impeller, reduce the phenomenon of gas ejection, and facilitate the smooth falling of materials.

4. sealing element

Seals are used to ensure the sealing performance of the Electric feeder in the working process and prevent material leakage and gas backflow. High-quality seals can improve the working efficiency and service life of equipment.

5. Motor and transmission device

The motor provides power for the Electric feeder, and the power is transmitted to the impeller through transmission devices (such as gears and sprockets) to make it rotate. The transmission device shall be designed to ensure smooth and reliable power transmission.

Electric feeder

5、Working principle of Electric feeder

Electric feederat work,Based on a rotor with several blades rotating in a cylindrical casing. When the rotor rotates, materials fall from the upper hopper and are filled in the spaces between the blades. With the rotation of the impeller, the material is conveyed to the lower part and discharged. At the same time, the pressure equalizing exhaust port on the side of the machine body can exhaust the high-pressure gas generated by the rotation of the impeller, so as to reduce the phenomenon of gas ejection and ensure the smooth falling of materials.，Simple structure and reliable operation.，it is mainly composed of main valve (including shell, end cover, impeller, sealing structure, etc.), vent, equalizing exhaust port, motor and transmission device and impeller，mainly used for dust removal equipment, dust discharge, air supply and other equipment feeding process.，is carefully developed by hyde combined with advanced technology。

Electric feeder

6、Electric feeder function

Electric feederit has the functions of material handling, equipment feeding, ensure air tightness of the system, continuously and uniformly feed or discharge. and prevent gas or dust leakage，it has the structure of sealing element, protective devices (such as sprockets, sprocket covers, etc.), motor and transmission device, equalizing exhaust port and sealing element，This productThe overall structural design is simple and novel.，support customization。

Electric feeder

Electric feederthe product looks atmospheric.，Widely used incontinuously and uniformly feed or discharge.,prevent gas or dust leakage,equipment feeding,blowing-in,material handling and so on，Through the rotation of the rotor with several blades in the cylindrical casing, the materials are uniformly and continuously transported from the upper hopper to the lower part to realize the function of feeding or discharging. In the pneumatic conveying system, the Electric feeder is one of the key components, which can supply materials evenly into the clinker pipe. At the same time, in the separation and dust collection part of the system, it also has the functions of unloader and air lock.。