Introduction to High pressure stainless steel Roots blower, introduction to Three leaf Roots blower advantages and characteristics

High pressure stainless steel Roots bloweris a positive displacement blower with forced gas transmission characteristics.，the product looks beautiful.，Small size and small floor space make it easy to arrange and install in places with limited space.、Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.、Because of the design of three-blade rotor, the High pressure stainless steel Roots blower has little vibration and low noise during operation, and the operation is stable and reliable、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.、It has high efficiency and can realize gas transportation and pressurization with low energy consumption.，When the motor drives one impeller to rotate, the other impeller will rotate synchronously at the same speed and in the opposite direction under the action of the synchronous gear. In the process of rotation, because the gaps between impeller and impeller, impeller and casing, impeller and wallboard are very small, a vacuum state is formed at the air inlet, and air is sucked into the air inlet cavity under the action of atmospheric pressure. As the impeller continues to rotate, two blades of each impeller, the wallboard and the casing form a sealed cavity, and the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades. Because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out. After continuous inhalation and extrusion, air is continuously transported from the air inlet to the air outlet, completing the whole gas transportation process.，the main structure includes case, muffler, wallboard, fuel tank and impeller。The following is to introduce the High pressure stainless steel Roots blower:

1、Brief introduction of High pressure stainless steel Roots blower

High pressure stainless steel Roots blowera rotary compressor that uses two lobed rotors to move relative to each other in a cylinder to compress and transport gas.，is a High pressure stainless steel Roots blower newly developed by hyde。

High pressure stainless steel Roots blower

2、Introduction of High pressure stainless steel Roots blower characteristics

High pressure stainless steel Roots blowerthe main features are be of simple construction, convenient maintenance, energy-efficient, energy-efficient and convenient maintenance。

High pressure stainless steel Roots blower

3、Structural characteristics of High pressure stainless steel Roots blower

The High pressure stainless steel Roots blower structure is introduced as follows:

1. muffler

Used to reduce the noise caused by airflow pulsation when the High pressure stainless steel Roots blower enters and exits.

2. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

3. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the High pressure stainless steel Roots blower, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

4. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

5. rotator

The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

High pressure stainless steel Roots blower

4、High pressure stainless steel Roots blower principle

High pressure stainless steel Roots blowerthe principle is simple.The gas is compressed and transported by the relative rotation of a pair of trilobal rotors in the cylinder. Each trilobal rotor is supported by two bearings, and the relative position of the two rotors is always kept constant by using a pair of synchronous gears. During the rotation of the rotor, there are tiny gaps between impeller and impeller, impeller and casing, impeller and side cover, so there is no friction in the working chamber and no lubrication is needed, thus realizing the smooth transportation of gas.，is a device that generates positive pressure or negative pressure through the relative rotation of two impellers, thus compressing and conveying gas.，be loved by our customers.。

High pressure stainless steel Roots blower

5、How much is the High pressure stainless steel Roots blower?

The High pressure stainless steel Roots blower price is introduced as follows:

1. technology content

The more advanced the technology, the higher the price will be, otherwise the product price will be low, and customers must pay attention to whether their own technology meets the production requirements when purchasing products.

2. regional advantages

hyde powder has a geographical advantage, where the transportation is developed, the product transportation cost is low, and the price and consumption level are also low, which provides a good sales environment for High pressure stainless steel Roots blower.

3. raw material

The raw materials used by manufacturers of different products will definitely be different. Some manufacturers use good raw materials for processing, and the cost of producing and manufacturing products is definitely high. If the quality of products produced by manufacturers is not guaranteed and the materials used are not very good, then the production cost of products will be low, and the price will be very low.

4. Company size

Our company's expected profit value of High pressure stainless steel Roots blower is relatively low, and adopts the sales policy of small profits but quick turnover, so the price positioning of High pressure stainless steel Roots blower is relatively low.

5. Proper management mode

Each manufacturer's sales model is different, and the preferential degree of products is also different. Some manufacturers adopt the mode of "thin profit and quick turnover", and the price is relatively cheap. Some manufacturers sell their products at high prices to earn high profits. When purchasing products, they must compare the prices to avoid being cheated.

High pressure stainless steel Roots blower

6、Why choose hyde?

Choosing a suitable High pressure stainless steel Roots blower manufacturer requires comprehensive consideration of many aspects. First of all, we should examine the strength of manufacturers, including production capacity, R&D team and industry experience. Strong manufacturers can better ensure product supply and innovation ability. Secondly, product quality is the key, and it is evaluated by product certification, material selection and manufacturing process to ensure the durability of products. Product performance can not be ignored, so we should choose manufacturers with matching technical parameters, rich types and customized services according to actual needs. After-sales service is equally important. Professional and timely service team, perfect after-sales content and extensive service network can make users worry about nothing. In addition, market reputation is also an important reference. We can understand the reputation and status of manufacturers through customer evaluation, industry reputation and award-winning honor. Finally, it is necessary to analyze the price and cost performance, and on the premise of ensuring the quality and performance, choose a manufacturer with reasonable price and high cost performance, so as to purchase High pressure stainless steel Roots blower products that meet the demand and have good cost performance.。

hyde powder

High pressure stainless steel Roots blowerthe advantage is Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.、In the process of air intake and exhaust, the High pressure stainless steel Roots blower will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.、The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the High pressure stainless steel Roots blower perform well in many situations where stable airflow is needed.、Due to the adoption of synchronous gear transmission and small gap design, the High pressure stainless steel Roots blower runs stably and reliably, without contact and wear parts, and has a long service life.、It has high efficiency and can realize gas transportation and pressurization with low energy consumption.，Widely used in Pressurized transportation, pick up the suction, dry, Ventilation and material handling。