What is a Directly connected dual water-cooled three blade Roots blower? Introduction to the advantages, characteristics, and principles of the Roots Blower

Directly connected dual water-cooled three blade Roots blowera rotary compressor that uses two lobed rotors to move relative to each other in a cylinder to compress and transport gas.，it is widely used in smelt, port, make paper, petrify, sewage disposal and other industries。

1、Brief introduction of Directly connected dual water-cooled three blade Roots blower

Directly connected dual water-cooled three blade Roots bloweris a positive displacement blower with forced gas transmission characteristics.，the main structure includes impeller, rotator, case, muffler, wallboard and so on，it has the functions of material handling, aeration, desulfurization oxidation, dry and cool。

Directly connected dual water-cooled three blade Roots blower

2、Directly connected dual water-cooled three blade Roots blower structure

The Directly connected dual water-cooled three blade Roots blower structure is introduced as follows:

1. muffler

Used to reduce the noise caused by airflow pulsation when the Directly connected dual water-cooled three blade Roots blower enters and exits.

2. rotator

The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

3. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the Directly connected dual water-cooled three blade Roots blower, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

4. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

5. impeller

It is the rotating part of the Directly connected dual water-cooled three blade Roots blower, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Directly connected dual water-cooled three blade Roots blower has gradually replaced the two-leaf Directly connected dual water-cooled three blade Roots blower.

Directly connected dual water-cooled three blade Roots blower

3、Working principle of Directly connected dual water-cooled three blade Roots blower

Directly connected dual water-cooled three blade Roots blowerat the start of the operation,It mainly depends on the relative movement of two lobed rotors (usually three-bladed impellers) in the cylinder to compress and transport gas.，is a positive displacement blower.。

Directly connected dual water-cooled three blade Roots blower

4、Directly connected dual water-cooled three blade Roots blower use

Directly connected dual water-cooled three blade Roots blowerMainly used forcool,exhaust emission,Ventilation,Desulfurization oxidation anddehydrate，is a Directly connected dual water-cooled three blade Roots blower，is a double impeller synchronous compression machine, belonging to a positive displacement blower.，in the course of work,The two three-blade impellers rotate relatively in the space sealed by the casing and the wallboard. Each impeller adopts the envelope of involute or epicycloid, the three blades of each impeller are exactly the same, and the two impellers are also exactly the same, which greatly reduces the machining difficulty. During the rotation of the impeller, air enters the air inlet cavity under the action of atmospheric pressure, and then two blades of each impeller, the wallboard and the casing form a sealed cavity. During the rotation of the impeller, the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades, and because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out, so that the air is continuously transported from the air inlet to the air outlet.，Due to the adoption of synchronous gear transmission and small gap design, the Directly connected dual water-cooled three blade Roots blower runs stably and reliably, without contact and wear parts, and has a long service life.、Small size and small floor space make it easy to arrange and install in places with limited space.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.、Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.、The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the Directly connected dual water-cooled three blade Roots blower perform well in many situations where stable airflow is needed.。

Directly connected dual water-cooled three blade Roots blower

5、How much is the Directly connected dual water-cooled three blade Roots blower?

The Directly connected dual water-cooled three blade Roots blower price is introduced as follows:

1. deploy

Usually, the quotation of Directly connected dual water-cooled three blade Roots blower changes with its configuration, but the quotation is different according to the different needs of customers and different product configurations.

2. select a qualified person

The raw materials used by different manufacturers will also be different. The better the raw materials, the better the quality and performance of the products and the higher the price. On the contrary, the products made of ordinary materials have low production costs and much lower prices.

3. Brand strength

At present, there are various brands of Directly connected dual water-cooled three blade Roots blower in shandong(Province). The performance, quality and after-sales of products under different brands are different, and the prices of Directly connected dual water-cooled three blade Roots blower are different.

4. raw material

The quality of materials directly determines the cost. The worse the materials are, the lower the cost will be, and the cheaper the price will be. Of course, the materials are better and the cost is higher, so the overall quotation is naturally higher.

5. manufacturing cost

A Directly connected dual water-cooled three blade Roots blower needs to spend a lot of manufacturing costs from research and development to production to sales, including raw material costs, technical costs, labor costs, etc. The higher the manufacturing cost, the higher the price will be.

Directly connected dual water-cooled three blade Roots blower

6、hyde's strength

The company has many years of Directly connected dual water-cooled three blade Roots blower manufacturing experience, large scale and strong strength.。

hyde powder

Directly connected dual water-cooled three blade Roots blowerIt has a wide range of uses, including cool, Ventilation, supply air, dry and exhaust emission，at runtime,Gas is compressed and transported based on the relative motion of two lobed rotors in the cylinder.。