Introduction to Positive pressure Roots blower and Three leaf Roots blower advantages and features

Positive pressure Roots bloweris a double impeller synchronous compression machine, belonging to a positive displacement blower.，the principle is simple.When the motor drives one impeller to rotate, the other impeller will rotate synchronously at the same speed and in the opposite direction under the action of the synchronous gear. In the process of rotation, because the gaps between impeller and impeller, impeller and casing, impeller and wallboard are very small, a vacuum state is formed at the air inlet, and air is sucked into the air inlet cavity under the action of atmospheric pressure. As the impeller continues to rotate, two blades of each impeller, the wallboard and the casing form a sealed cavity, and the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades. Because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out. After continuous inhalation and extrusion, air is continuously transported from the air inlet to the air outlet, completing the whole gas transportation process.，It can be used for pick up the suction, mix, aeration, Desulfurization oxidation, dry, sewage disposal and so on，it has the functions of mix, dehydrate, sewage disposal, pick up the suction and aquaculture，is an advanced Positive pressure Roots blower developed by our company in combination with the actual situation of the industry。The following is to introduce the Positive pressure Roots blower:

1、Brief introduction of Positive pressure Roots blower

Positive pressure Roots bloweris a device that generates positive pressure or negative pressure through the relative rotation of two impellers, thus compressing and conveying gas.，is a kind of high quality and low price Positive pressure Roots blower，the main features are wide application range, run smoothly, smooth operation, low noise and durable performance。

Positive pressure Roots blower

2、Positive pressure Roots blower structure

The Positive pressure Roots blower structure is introduced as follows:

1. muffler

Used to reduce the noise caused by airflow pulsation when the Positive pressure Roots blower enters and exits.

2. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

3. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

4. rotator

The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

5. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

Positive pressure Roots blower

3、Positive pressure Roots blower principle

Positive pressure Roots blowerat the start of the operation,Gas is compressed and transported based on the relative motion of two lobed rotors in the cylinder.，it is widely used inaquaculture,Dust removal,petrify,sewage disposal,aquaculture and other industries，it has the characteristics of energy-efficient, strong adaptability, economical and durable, convenient manufacture and strong adaptability，be loved by our customers.。

Positive pressure Roots blower

4、Positive pressure Roots blower function

Positive pressure Roots blowermultifunctional, with functions such as pressurized transportation, ventilation, exhaust emission, cool and desulfurization oxidation，is based on hyde is a kind of Positive pressure Roots blower manufactured by hyde powder。

Positive pressure Roots blower

5、Positive pressure Roots blower display

High-definition picture display of Positive pressure Roots blower, excellent material selection, reliable quality and trustworthy.。

Positive pressure Roots blower

Note: All the pictures in this article were taken by hyde powder manufacturer.。

Positive pressure Roots blowerin the course of work,The gas is compressed and transported by the relative rotation of a pair of trilobal rotors in the cylinder. Each trilobal rotor is supported by two bearings, and the relative position of the two rotors is always kept constant by using a pair of synchronous gears. During the rotation of the rotor, there are tiny gaps between impeller and impeller, impeller and casing, impeller and side cover, so there is no friction in the working chamber and no lubrication is needed, thus realizing the smooth transportation of gas.，it can be used in power, power, make paper, smelt, Food and beverage processing and other industries，In the process of air intake and exhaust, the Positive pressure Roots blower will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.、Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.、It has high efficiency and can realize gas transportation and pressurization with low energy consumption.、Due to the adoption of synchronous gear transmission and small gap design, the Positive pressure Roots blower runs stably and reliably, without contact and wear parts, and has a long service life.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.。