What is a High temperature resistant Roots blower? Three leaf Roots blower specifications, models, and parameters

High temperature resistant Roots bloweris an efficient volumetric gas conveying and pressurizing equipment.，it is widely used in Food and beverage processing, Flue gas treatment, smelt, mine, aquaculture and other industries，It is a product series that integrates Ventilation, material handling, mix, dry and sewage disposal。

1、Brief introduction of High temperature resistant Roots blower

High temperature resistant Roots blowerthe models are complete and can meet the needs of different users for different purposes.，The gas is compressed and transported by the relative rotation of a pair of trilobal rotors in the cylinder. Each trilobal rotor is supported by two bearings, and the relative position of the two rotors is always kept constant by using a pair of synchronous gears. During the rotation of the rotor, there are tiny gaps between impeller and impeller, impeller and casing, impeller and side cover, so there is no friction in the working chamber and no lubrication is needed, thus realizing the smooth transportation of gas.，features include economical and durable, strong adaptability, be of simple construction, wide application range and low noise，the main structure includes case, impeller, case, rotator and muffler，This productThe overall structural design is relatively simple，is a popular High temperature resistant Roots blower。

High temperature resistant Roots blower

2、High temperature resistant Roots blower real beat

The omni-directional high-definition real shot of the High temperature resistant Roots blower is shown as follows to meet the purchase needs of our customers.。

High temperature resistant Roots blower

Note: All the pictures in this article were taken by hyde manufacturer.。

3、Functional advantages of High temperature resistant Roots blower

High temperature resistant Roots blowers have the following advantages.

1. Wide application range

Widely used in many fields, such as commodity industry, etc., it is more suitable for gas transportation and pressurization systems in low-pressure occasions, and can also be used as vacuum pumps.

2. Stable air output

The air volume of the High temperature resistant Roots blower is proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the High temperature resistant Roots blower perform well in many situations where stable airflow is needed.

3. Stable and reliable

Due to the adoption of synchronous gear transmission and small gap design, the High temperature resistant Roots blower runs stably and reliably, without contact and wear parts, and has a long service life.

4. Convenient maintenance

The structure of the High temperature resistant Roots blower is relatively simple and easy to maintain.

5. be of simple construction

The High temperature resistant Roots blower is simple in design and easy to manufacture and maintain.

High temperature resistant Roots blower

4、High temperature resistant Roots blower function

High temperature resistant Roots blowerit has the functions of material fluidization, pressurized transportation, aquaculture, mix and desulfurization oxidation，the product looks atmospheric.，the advantage is It has high efficiency and can realize gas transportation and pressurization with low energy consumption.、It has high efficiency and can realize gas transportation and pressurization with low energy consumption.、In the process of air intake and exhaust, the High temperature resistant Roots blower will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.、Due to the adoption of synchronous gear transmission and small gap design, the High temperature resistant Roots blower runs stably and reliably, without contact and wear parts, and has a long service life.、Because of the design of three-blade rotor, the High temperature resistant Roots blower has little vibration and low noise during operation, and the operation is stable and reliable，Widely used in aquaculture, supply air, cool, sewage disposal and aeration，widely used inDust removal,coal chemical industry,port,power,make paper and other industries。

High temperature resistant Roots blower

5、Structural advantages of High temperature resistant Roots blower

The High temperature resistant Roots blower has the following structure

1. muffler

Used to reduce the noise caused by airflow pulsation when the High temperature resistant Roots blower enters and exits.

2. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

3. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

4. impeller

It is the rotating part of the High temperature resistant Roots blower, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf High temperature resistant Roots blower has gradually replaced the two-leaf High temperature resistant Roots blower.

5. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the High temperature resistant Roots blower, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

High temperature resistant Roots blower

6、High temperature resistant Roots blower price consultation

The High temperature resistant Roots blower price is introduced as follows:

1. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

2. Product technology

The more advanced the technology, the higher the price will be, otherwise the equipment price will be low, and users must pay attention to whether their own technology meets the production requirements when purchasing equipment.

3. cost of production

A High temperature resistant Roots blower needs to spend a lot of manufacturing costs from research and development to production to sales, including raw material costs, technical costs, labor costs, etc. The higher the manufacturing cost, the higher the price will be.

4. Manufacturer scale

The products manufactured by manufacturers of different scales are also different. Large-scale manufacturers have advanced production technology, the quality of products manufactured is reliable, and large-scale manufacturers have perfect after-sales service, which can provide greater protection for customers and the products manufactured are more cost-effective. Therefore, customers should try to choose large manufacturers to purchase.

5. market supply and demand

This factor is directly related to the economic dynamics. When the economic dynamics are unstable, the relationship between supply and demand will be unbalanced, which will lead to a very large fluctuation in the price of High temperature resistant Roots blower. Therefore, we should also be aware of the relationship between this factor and the price during the price setting process.

High temperature resistant Roots blower

High temperature resistant Roots blowerin the course of work,It mainly depends on the relative movement of two lobed rotors (usually three-bladed impellers) in the cylinder to compress and transport gas.，a rotary compressor that uses two lobed rotors to move relative to each other in a cylinder to compress and transport gas.。