Introduction to Anti corrosion Roots blower and Three leaf Roots blower structure principle

Anti corrosion Roots bloweris an efficient volumetric gas conveying and pressurizing equipment.，It has a wide range of uses, and is often used incool,exhaust emission,mix,Pressurized transportation,aeration and so on，the product looks atmospheric.，Widely used in dry, aquaculture, Material fluidization, dehydrate and Desulfurization oxidation，smooth operation,wide application range,energy-efficient,strong adaptability,convenient manufacture。The following is to introduce the Anti corrosion Roots blower:

1、Brief introduction of Anti corrosion Roots blower

Anti corrosion Roots bloweris a positive displacement blower with forced gas transmission characteristics.，The structure is novel, special, advanced, reasonable and scientific.，it is usually composed of bearing, muffler, rotator, case and case。

Anti corrosion Roots blower

2、Anti corrosion Roots blower structure

The Anti corrosion Roots blower structure is introduced as follows:

1. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

2. impeller

It is the rotating part of the Anti corrosion Roots blower, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Anti corrosion Roots blower has gradually replaced the two-leaf Anti corrosion Roots blower.

3. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the Anti corrosion Roots blower, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

4. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

5. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

Anti corrosion Roots blower

3、Advantages of Anti corrosion Roots blower principle

Anti corrosion Roots blowerthe principle is simple.When the motor drives one impeller to rotate, the other impeller will rotate synchronously at the same speed and in the opposite direction under the action of the synchronous gear. In the process of rotation, because the gaps between impeller and impeller, impeller and casing, impeller and wallboard are very small, a vacuum state is formed at the air inlet, and air is sucked into the air inlet cavity under the action of atmospheric pressure. As the impeller continues to rotate, two blades of each impeller, the wallboard and the casing form a sealed cavity, and the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades. Because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out. After continuous inhalation and extrusion, air is continuously transported from the air inlet to the air outlet, completing the whole gas transportation process.，features include durable performance, economical and durable, wide application range, low noise and stable and reliable，In the process of air intake and exhaust, the Anti corrosion Roots blower will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.、Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.、The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the Anti corrosion Roots blower perform well in many situations where stable airflow is needed.、Due to the adoption of synchronous gear transmission and small gap design, the Anti corrosion Roots blower runs stably and reliably, without contact and wear parts, and has a long service life.、Small size and small floor space make it easy to arrange and install in places with limited space.，Commonly used inVentilation,sewage disposal,Desulfurization oxidation,dry,supply air and so on，is a double impeller synchronous compression machine, belonging to a positive displacement blower.。

Anti corrosion Roots blower

4、Anti corrosion Roots blower use

Anti corrosion Roots blowerIt is a product series that integrates exhaust emission, pick up the suction, dehydrate, sewage disposal and cool，is a Anti corrosion Roots blower newly developed by hyde。

Anti corrosion Roots blower

5、Anti corrosion Roots blower HD picture

The design of hyde powder Anti corrosion Roots blower is exquisite and elegant. Here are the high-definition pictures of hyde powder's factory products for our customers' reference. We need to make an appointment to visit the factory in advance for physical inspection.。

Anti corrosion Roots blower

Note: All the pictures in this article were taken by hyde manufacturer.。

6、hyde powder's strength

The company has many years of Anti corrosion Roots blower manufacturing experience, large scale and strong strength.。

hyde

Anti corrosion Roots blowermultifunctional, with functions such as aeration, supply air, exhaust emission, dry and ventilation，is a Anti corrosion Roots blower，the product looks beautiful.。