Introduction to High power Roots blower, Three leaf Roots blower advantages, characteristics and principles

High power Roots bloweris a device that generates positive pressure or negative pressure through the relative rotation of two impellers, thus compressing and conveying gas.，it can be used in building materials, petrify, pneumatic transport, mine, sewage disposal and other industries，modern technology。The following is to introduce the High power Roots blower:

1、Brief introduction of High power Roots blower

High power Roots bloweris a double impeller synchronous compression machine, belonging to a positive displacement blower.，is a common High power Roots blower，Commonly used inmaterial handling,sewage disposal,dehydrate,dry,Ventilation and so on，the product looks beautiful.，support customization。

High power Roots blower

2、High power Roots blower function

High power Roots blowermultifunctional, with functions such as dry, mix, exhaust emission, material handling and dehydrate，the main features are economical and durable, low noise, wide application range, run smoothly and low noise，the main structure includes muffler, bearing, rotator, fuel tank, fuel tank and so on，This productThe structural design is more advanced and reasonable.。

High power Roots blower

3、High power Roots blower HD picture real shot

The following pictures can be used for reference by new and old customers.。

High power Roots blower

Note: All the pictures in this article were taken by hyde powder manufacturer.。

4、Advantages of High power Roots blower principle

High power Roots blowerin the course of work,When the motor drives one impeller to rotate, the other impeller will rotate synchronously at the same speed and in the opposite direction under the action of the synchronous gear. In the process of rotation, because the gaps between impeller and impeller, impeller and casing, impeller and wallboard are very small, a vacuum state is formed at the air inlet, and air is sucked into the air inlet cavity under the action of atmospheric pressure. As the impeller continues to rotate, two blades of each impeller, the wallboard and the casing form a sealed cavity, and the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades. Because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out. After continuous inhalation and extrusion, air is continuously transported from the air inlet to the air outlet, completing the whole gas transportation process.，a rotary compressor that uses two lobed rotors to move relative to each other in a cylinder to compress and transport gas.，the product looks atmospheric.，it is an ideal choice for customers to buy High power Roots blower。

High power Roots blower

5、High power Roots blower structure

The High power Roots blower structure is introduced as follows:

1. rotator

The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

2. muffler

Used to reduce the noise caused by airflow pulsation when the High power Roots blower enters and exits.

3. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the High power Roots blower, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

4. impeller

It is the rotating part of the High power Roots blower, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf High power Roots blower has gradually replaced the two-leaf High power Roots blower.

5. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

High power Roots blower

High power Roots blowerit is mainly composed of muffler, impeller, case, impeller and wallboard，at the start of the operation,It mainly depends on the relative movement of two lobed rotors (usually three-bladed impellers) in the cylinder to compress and transport gas.，stable and reliable,Precise control,convenient maintenance,durable performance,wide application range。