What is a Carbon steel Roots blower? blower specifications, models, and parameters

Carbon steel Roots blowera rotary compressor that uses two lobed rotors to move relative to each other in a cylinder to compress and transport gas.。

1、Brief introduction of Carbon steel Roots blower

Carbon steel Roots bloweris a positive displacement blower with forced gas transmission characteristics.，the principle is simple.The gas is compressed and transported by the relative rotation of a pair of trilobal rotors in the cylinder. Each trilobal rotor is supported by two bearings, and the relative position of the two rotors is always kept constant by using a pair of synchronous gears. During the rotation of the rotor, there are tiny gaps between impeller and impeller, impeller and casing, impeller and side cover, so there is no friction in the working chamber and no lubrication is needed, thus realizing the smooth transportation of gas.，it has been widely used in Environmental protection industry, petrochemical industry, aquaculture, port, Textile light textile and other industries，the main structure includes wallboard, case, fuel tank, bearing and muffler，productThe overall structural design is relatively simple，Mainly used fordry,supply air,Material fluidization,exhaust emission andpick up the suction。

Carbon steel Roots blower

2、Structural advantages of Carbon steel Roots blower

The Carbon steel Roots blower has the following structure

1. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

2. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

3. impeller

It is the rotating part of the Carbon steel Roots blower, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Carbon steel Roots blower has gradually replaced the two-leaf Carbon steel Roots blower.

4. muffler

Used to reduce the noise caused by airflow pulsation when the Carbon steel Roots blower enters and exits.

5. rotator

The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

Carbon steel Roots blower

3、Introduction of Carbon steel Roots blower characteristics

Carbon steel Roots blowerit has the characteristics of economical and durable, convenient manufacture, strong adaptability, wide application range and wide application range，is a popular Carbon steel Roots blower，the product looks atmospheric.，be of high quality，favorable price。

Carbon steel Roots blower

4、Carbon steel Roots blower HD picture

Beautiful design, excellent material selection and excellent quality.。

Carbon steel Roots blower

Note: All the pictures in this article were taken by hyde powder manufacturer.。

5、How much is the Carbon steel Roots blower?

The Carbon steel Roots blower price is introduced as follows:

1. regional difference

If the location of the manufacturer is superior, its transportation will be more convenient. hyde the address is located at:jinan, Shandong province has convenient transportation, which provides a good convenience for the transportation of Carbon steel Roots blower.

2. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

3. cost of production

The production cost determines the price. The production cost here mainly includes technology, materials, technology, manpower and other related factors, among which the technology content is high, and the cost is relatively high, but the performance will be better; The better the quality of raw materials, the greater the cost and the longer the overall life of the product; If the manufacturer has a rational manufacturing process and strict production management system, and can make full use of human and material resources, then it can reduce the waste of expenses and production costs to a great extent, and the Carbon steel Roots blower just meets this condition, so as to ensure the high-tech content and high quality of products, it can also enjoy low prices.

4. technology

The more advanced the technology, the higher the price will be, otherwise the product price will be low, and customers must pay attention to whether their own technology meets the production requirements when purchasing products.

5. market supply and demand

This is one of the external factors that lead to price fluctuation. Only after fully understanding the market can we make a reasonable decision. hyde powder has a deep understanding of this factor, so the price of our Carbon steel Roots blower is more reasonable.

Carbon steel Roots blower

6、hyde's strength

The company has many years of Carbon steel Roots blower manufacturing experience, large scale and strong strength.。

hyde powder

Carbon steel Roots blowermultifunctional, with functions such as aquaculture, desulfurization oxidation, cool, material handling and exhaust emission，Widely used inmix,Ventilation,Desulfurization oxidation,sewage disposal,material handling and so on。