What is a Natural gas pressurized three blade Roots blower? blower specifications, models, and parameters

Natural gas pressurized three blade Roots bloweris a device that generates positive pressure or negative pressure through the relative rotation of two impellers, thus compressing and conveying gas.，It has a wide range of uses, including supply air, Material fluidization, pick up the suction, sewage disposal and Ventilation，the advantage is It has high efficiency and can realize gas transportation and pressurization with low energy consumption.、Due to the adoption of synchronous gear transmission and small gap design, the Natural gas pressurized three blade Roots blower runs stably and reliably, without contact and wear parts, and has a long service life.、Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.、Because of the design of three-blade rotor, the Natural gas pressurized three blade Roots blower has little vibration and low noise during operation, and the operation is stable and reliable、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the Natural gas pressurized three blade Roots blower less vibration and noise.。

1、Brief introduction of Natural gas pressurized three blade Roots blower

Natural gas pressurized three blade Roots bloweris an efficient volumetric gas conveying and pressurizing equipment.，is a kind of high quality and low price Natural gas pressurized three blade Roots blower，it is an ideal choice for customers to buy Natural gas pressurized three blade Roots blower。

Natural gas pressurized three blade Roots blower

2、Introduction of advantages of Natural gas pressurized three blade Roots blower

Natural gas pressurized three blade Roots blowers have the following advantages.

1. Low noise and vibration

The three-leaf rotor structure of the Natural gas pressurized three blade Roots blower makes it less vibration and noise. This feature makes the Natural gas pressurized three blade Roots blower work normally in situations where a quiet environment is needed.

2. Durable performance

The impeller and shaft of the Natural gas pressurized three blade Roots blower are designed as a whole, and the impeller is not worn, so the performance is durable and can run continuously for a long time.

3. energy-efficient

The Natural gas pressurized three blade Roots blower has high efficiency and can realize gas transportation and pressurization with low energy consumption.

4. Stable air output

Due to the design of three-blade rotor, the Natural gas pressurized three blade Roots blower has little vibration and low noise during operation, and the operation is stable and reliable.

5. Convenient maintenance

The structure of the Natural gas pressurized three blade Roots blower is relatively simple and easy to maintain.

Natural gas pressurized three blade Roots blower

3、Natural gas pressurized three blade Roots blower application

Natural gas pressurized three blade Roots blowerIt can be used for dehydrate, Pressurized transportation, aeration, mix, exhaust emission, dry and so on，it has the functions of material fluidization, material handling, supply air, desulfurization oxidation and aeration。

Natural gas pressurized three blade Roots blower

4、Structural characteristics of Natural gas pressurized three blade Roots blower

The Natural gas pressurized three blade Roots blower structure is introduced as follows:

1. rotator

The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

2. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

3. muffler

Used to reduce the noise caused by airflow pulsation when the Natural gas pressurized three blade Roots blower enters and exits.

4. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the Natural gas pressurized three blade Roots blower, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

5. impeller

It is the rotating part of the Natural gas pressurized three blade Roots blower, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Natural gas pressurized three blade Roots blower has gradually replaced the two-leaf Natural gas pressurized three blade Roots blower.

Natural gas pressurized three blade Roots blower

5、Natural gas pressurized three blade Roots blower HD real shot

hyde provides customers with on-site high-definition video, fully demonstrates the advantages of on-site Natural gas pressurized three blade Roots blowert operation, and helps customers to deeply understand the Natural gas pressurized three blade Roots blower production process and production site, and gain favorable comments and recognition from customers.。

Natural gas pressurized three blade Roots blower

As you can see from the live video.，hyde powder the product looks beautiful.。

Natural gas pressurized three blade Roots blowerat work,The gas is compressed and transported by the relative rotation of a pair of trilobal rotors in the cylinder. Each trilobal rotor is supported by two bearings, and the relative position of the two rotors is always kept constant by using a pair of synchronous gears. During the rotation of the rotor, there are tiny gaps between impeller and impeller, impeller and casing, impeller and side cover, so there is no friction in the working chamber and no lubrication is needed, thus realizing the smooth transportation of gas.，Simple structure and reliable operation.，it is mainly composed of bearing, bearing, muffler, rotator and case。