Introduction to Ammonia gas booster Roots blower, Three leaf Roots blower specifications, model parameters

Ammonia gas booster Roots bloweris a device that generates positive pressure or negative pressure through the relative rotation of two impellers, thus compressing and conveying gas.，the product looks atmospheric.，Mainly used formix,aeration,supply air,exhaust emission anddry。

1、Brief introduction of Ammonia gas booster Roots blower

Ammonia gas booster Roots bloweris an efficient volumetric gas conveying and pressurizing equipment.，in the course of work,When the motor drives one impeller to rotate, the other impeller will rotate synchronously at the same speed and in the opposite direction under the action of the synchronous gear. In the process of rotation, because the gaps between impeller and impeller, impeller and casing, impeller and wallboard are very small, a vacuum state is formed at the air inlet, and air is sucked into the air inlet cavity under the action of atmospheric pressure. As the impeller continues to rotate, two blades of each impeller, the wallboard and the casing form a sealed cavity, and the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades. Because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out. After continuous inhalation and extrusion, air is continuously transported from the air inlet to the air outlet, completing the whole gas transportation process.，it mainly includes impeller, fuel tank, rotator, wallboard and case，productThe structure is novel, special, advanced, reasonable and scientific.，multifunctional, with functions such as supply air, aeration, aquaculture, material handling and dry，Cheap and high quality。

Ammonia gas booster Roots blower

2、Ammonia gas booster Roots blower performance advantage

Ammonia gas booster Roots blowers have the following advantages.

1. Long service life

The mechanical friction of the Ammonia gas booster Roots blower is small and the loss is low, so its service life is relatively long. This enables it to maintain high working efficiency and stability in long-term operation.

2. Economical and durable

The design without lubrication reduces the maintenance cost and improves the economy of the equipment.

3. Low noise and vibration

The three-leaf rotor structure of the Ammonia gas booster Roots blower makes it less vibration and noise. This feature makes the Ammonia gas booster Roots blower work normally in situations where a quiet environment is needed.

4. Strong adaptability

Ammonia gas booster Roots blowers are suitable for many purposes and have been widely used in various fields.

5. Stable air output

In the process of air intake and exhaust, the Ammonia gas booster Roots blower will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.

Ammonia gas booster Roots blower

3、Ammonia gas booster Roots blower structure composition

The Ammonia gas booster Roots blower structure is introduced as follows:

1. impeller

It is the rotating part of the Ammonia gas booster Roots blower, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Ammonia gas booster Roots blower has gradually replaced the two-leaf Ammonia gas booster Roots blower.

2. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

3. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the Ammonia gas booster Roots blower, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

4. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

5. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

Ammonia gas booster Roots blower

4、Ammonia gas booster Roots blower video live broadcast

hyde provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the Ammonia gas booster Roots blower production process and production site, and gain favorable comments and recognition from customers.。

Ammonia gas booster Roots blower

As you can see from the live video.，hyde powder is a kind of high quality and low price Ammonia gas booster Roots blower。

5、On-site real shot of Ammonia gas booster Roots blower

HD picture of hyde powder Ammonia gas booster Roots blower,stable and reliable。

Ammonia gas booster Roots blower

Note: All the pictures in this article were taken by hyde manufacturer.。

Ammonia gas booster Roots blowerfeatures include low noise, energy-efficient, convenient manufacture, be of simple construction and strong adaptability，is a double impeller synchronous compression machine, belonging to a positive displacement blower.。