What is a Roots blower for light hydrocarbon gas transportation? blower specifications, models, and parameters

Roots blower for light hydrocarbon gas transportationa rotary compressor that uses two lobed rotors to move relative to each other in a cylinder to compress and transport gas.，the main structure includes fuel tank, muffler, rotator, bearing, case and so on，productSimple structure and advanced technology.，at work,The gas is compressed and transported by the relative rotation of a pair of trilobal rotors in the cylinder. Each trilobal rotor is supported by two bearings, and the relative position of the two rotors is always kept constant by using a pair of synchronous gears. During the rotation of the rotor, there are tiny gaps between impeller and impeller, impeller and casing, impeller and side cover, so there is no friction in the working chamber and no lubrication is needed, thus realizing the smooth transportation of gas.，is a kind of high quality and low price Roots blower for light hydrocarbon gas transportation，support customization。

1、Brief introduction of Roots blower for light hydrocarbon gas transportation

Roots blower for light hydrocarbon gas transportationis a positive displacement blower.，multifunctional, with functions such as dry, material handling, sewage disposal, aquaculture and cool，Commonly used indehydrate,pick up the suction,dry,material handling,cool and so on。

Roots blower for light hydrocarbon gas transportation

2、Roots blower for light hydrocarbon gas transportation structure

The Roots blower for light hydrocarbon gas transportation structure is introduced as follows:

1. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

2. impeller

It is the rotating part of the Roots blower for light hydrocarbon gas transportation, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Roots blower for light hydrocarbon gas transportation has gradually replaced the two-leaf Roots blower for light hydrocarbon gas transportation.

3. rotator

The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

4. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the Roots blower for light hydrocarbon gas transportation, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

5. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

Roots blower for light hydrocarbon gas transportation

3、Functional advantages of Roots blower for light hydrocarbon gas transportation

Roots blower for light hydrocarbon gas transportations have the following advantages.

1. Reliable operation and convenient maintenance

The air volume of the Roots blower for light hydrocarbon gas transportation is proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the Roots blower for light hydrocarbon gas transportation perform well in many situations where stable airflow is needed.

2. Long service life

The mechanical friction of the Roots blower for light hydrocarbon gas transportation is small and the loss is low, so its service life is relatively long. This enables it to maintain high working efficiency and stability in long-term operation.

3. energy-efficient

The Roots blower for light hydrocarbon gas transportation has high efficiency and can realize gas transportation and pressurization with low energy consumption.

4. be of simple construction

The Roots blower for light hydrocarbon gas transportation is simple in design and easy to manufacture and maintain.

5. Long service life

The mechanical friction of the Roots blower for light hydrocarbon gas transportation is small and the loss is low, so its service life is relatively long. This enables it to maintain high working efficiency and stability in long-term operation.

Roots blower for light hydrocarbon gas transportation

4、Working principle of Roots blower for light hydrocarbon gas transportation

Roots blower for light hydrocarbon gas transportationin the course of work,It mainly depends on the relative movement of two lobed rotors (usually three-bladed impellers) in the cylinder to compress and transport gas.，The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the Roots blower for light hydrocarbon gas transportation less vibration and noise.、The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the Roots blower for light hydrocarbon gas transportation perform well in many situations where stable airflow is needed.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.、Because of the design of three-blade rotor, the Roots blower for light hydrocarbon gas transportation has little vibration and low noise during operation, and the operation is stable and reliable、Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.，It is mostly used in exhaust emission, aeration, aquaculture, dehydrate, Pressurized transportation, Ventilation and so on，the product looks beautiful.，favorable price。

Roots blower for light hydrocarbon gas transportation

5、Roots blower for light hydrocarbon gas transportation function

Roots blower for light hydrocarbon gas transportationit has the functions of exhaust emission, material fluidization, pressurized transportation, dehydrate and ventilation，at runtime,The two three-blade impellers rotate relatively in the space sealed by the casing and the wallboard. Each impeller adopts the envelope of involute or epicycloid, the three blades of each impeller are exactly the same, and the two impellers are also exactly the same, which greatly reduces the machining difficulty. During the rotation of the impeller, air enters the air inlet cavity under the action of atmospheric pressure, and then two blades of each impeller, the wallboard and the casing form a sealed cavity. During the rotation of the impeller, the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades, and because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out, so that the air is continuously transported from the air inlet to the air outlet.。

Roots blower for light hydrocarbon gas transportation

Roots blower for light hydrocarbon gas transportationfeatures include wide application range, run smoothly, convenient maintenance, convenient manufacture and stable and reliable，the advantage is Due to the adoption of synchronous gear transmission and small gap design, the Roots blower for light hydrocarbon gas transportation runs stably and reliably, without contact and wear parts, and has a long service life.、Because of the design of three-blade rotor, the Roots blower for light hydrocarbon gas transportation has little vibration and low noise during operation, and the operation is stable and reliable、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the Roots blower for light hydrocarbon gas transportation less vibration and noise.、It has high efficiency and can realize gas transportation and pressurization with low energy consumption.、Small size and small floor space make it easy to arrange and install in places with limited space.。