What is a Blowing and aerating Roots blower? Introduction to the advantages and characteristics of the blower

Blowing and aerating Roots bloweris a positive displacement blower.，the main structure includes muffler, wallboard, rotator, impeller and case，it has the functions of pressurized transportation, supply air, aeration, material handling and exhaust emission，The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the Blowing and aerating Roots blower perform well in many situations where stable airflow is needed.、Small size and small floor space make it easy to arrange and install in places with limited space.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.、Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the Blowing and aerating Roots blower less vibration and noise.，The price is more affordable。The following is to introduce the Blowing and aerating Roots blower:

1、Brief introduction of Blowing and aerating Roots blower

Blowing and aerating Roots blowera rotary compressor that uses two lobed rotors to move relative to each other in a cylinder to compress and transport gas.，it has been widely used in Environmental protection industry, mine, Environmental protection industry, Textile light textile, Dust removal and other industries，at runtime,Gas is compressed and transported based on the relative motion of two lobed rotors in the cylinder. When the two rotors rotate, the volume between them changes constantly, thus realizing the suction, compression and discharge of gas.，the product looks beautiful.，It has a wide range of uses, and is often used indehydrate,aeration,Material fluidization,exhaust emission,supply air and so on。

Blowing and aerating Roots blower

2、Blowing and aerating Roots blower function

Blowing and aerating Roots blowerit has the functions of exhaust emission, ventilation, dry, pick up the suction and aquaculture，is a device that generates positive pressure or negative pressure through the relative rotation of two impellers, thus compressing and conveying gas.，support customization。

Blowing and aerating Roots blower

3、Working principle of Blowing and aerating Roots blower

Blowing and aerating Roots blowerin the course of work,It mainly depends on the relative movement of two lobed rotors (usually three-bladed impellers) in the cylinder to compress and transport gas.，features include low noise, smooth operation, convenient manufacture, wide application range and be of simple construction，the product looks atmospheric.，is a positive displacement blower.，it is an ideal choice for customers to buy Blowing and aerating Roots blower。

Blowing and aerating Roots blower

4、Blowing and aerating Roots blower use

Blowing and aerating Roots blowerWidely used in mix, cool, material handling, Desulfurization oxidation and dry，the product looks atmospheric.，The overall structural design is simple, diverse and beautiful.，it is mainly composed of muffler, bearing, fuel tank, wallboard and rotator。

Blowing and aerating Roots blower

5、Blowing and aerating Roots blower structure composition

The Blowing and aerating Roots blower has the following structure

1. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

2. muffler

Used to reduce the noise caused by airflow pulsation when the Blowing and aerating Roots blower enters and exits.

3. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

4. impeller

It is the rotating part of the Blowing and aerating Roots blower, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Blowing and aerating Roots blower has gradually replaced the two-leaf Blowing and aerating Roots blower.

5. rotator

The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

Blowing and aerating Roots blower

6、hyde's after-sales service

Perfect service: In order to improve the service quality and improve the service level, hyde powder has set up a sound quality management department and a professional after-sales service team, so as to be highly responsible for customers and avoid their worries in the use process.。

hyde

Blowing and aerating Roots blowermultifunctional, with functions such as cool, dehydrate, sewage disposal, mix and aeration，Gas is compressed and transported based on the relative motion of two lobed rotors in the cylinder.，widely used incoal chemical industry,power,port,Flue gas treatment,aquaculture and other industries。