Introduction to Roots blower for building materials industry and Roots Blower working principle

Roots blower for building materials industryis a double impeller synchronous compression machine, belonging to a positive displacement blower.，at work,It mainly depends on the relative movement of two lobed rotors (usually three-bladed impellers) in the cylinder to compress and transport gas.，Widely used in material handling, pick up the suction, supply air, Material fluidization and sewage disposal，it has the characteristics of wide application range, run smoothly, Precise control, smooth operation and stable and reliable，it is widely used inFood and beverage processing,power,Flue gas treatment,water treatment,petrochemical industry and other industries。

1、Brief introduction of Roots blower for building materials industry

Roots blower for building materials industryis a positive displacement blower with forced gas transmission characteristics.。

Roots blower for building materials industry

2、Structural characteristics of Roots blower for building materials industry

The Roots blower for building materials industry has the following structure

1. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

2. rotator

The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

3. impeller

It is the rotating part of the Roots blower for building materials industry, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Roots blower for building materials industry has gradually replaced the two-leaf Roots blower for building materials industry.

4. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

5. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

Roots blower for building materials industry

3、Roots blower for building materials industry principle

Roots blower for building materials industryin the course of work,Gas is compressed and transported based on the relative motion of two lobed rotors in the cylinder. When the two rotors rotate, the volume between them changes constantly, thus realizing the suction, compression and discharge of gas.，It has a wide range of uses, including Ventilation, mix, mix, supply air and exhaust emission，the main features are convenient manufacture, strong adaptability, low noise, be of simple construction and energy-efficient，is a common Roots blower for building materials industry，was developed and designed by hyde。

Roots blower for building materials industry

4、Roots blower for building materials industry function

Roots blower for building materials industryit has the functions of exhaust emission, desulfurization oxidation, material handling, cool and supply air，When the motor drives one impeller to rotate, the other impeller will rotate synchronously at the same speed and in the opposite direction under the action of the synchronous gear. In the process of rotation, because the gaps between impeller and impeller, impeller and casing, impeller and wallboard are very small, a vacuum state is formed at the air inlet, and air is sucked into the air inlet cavity under the action of atmospheric pressure. As the impeller continues to rotate, two blades of each impeller, the wallboard and the casing form a sealed cavity, and the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades. Because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out. After continuous inhalation and extrusion, air is continuously transported from the air inlet to the air outlet, completing the whole gas transportation process.，is a Roots blower for building materials industry，it is an ideal choice for customers to buy Roots blower for building materials industry。

Roots blower for building materials industry

5、Roots blower for building materials industry advantage

The advantages of Roots blower for building materials industry are as follows:

1. Durable performance

Impeller and shaft are integrated structure, and the impeller is not worn, so the performance of the fan is durable and can run continuously for a long time.

2. Economical and durable

The design without lubrication reduces the maintenance cost and improves the economy of the equipment.

3. Simple structure and convenient manufacture

The Roots blower for building materials industry is small in size and occupies a small area, which makes it easy to arrange and install in places with limited space.

4. Long service life

The mechanical friction of the Roots blower for building materials industry is small and the loss is low, so its service life is relatively long. This enables it to maintain high working efficiency and stability in long-term operation.

5. Wide application range

The Roots blower for building materials industry is suitable for conveying and pressurizing a variety of gases, including air, oxygen, nitrogen, etc., and can work stably under different pressures and flows.

Roots blower for building materials industry

6、Roots blower for building materials industry field real shot

A high-definition picture list of Roots blower for building materials industry is available for our customers to visit. The physical visit can be made to the factory. The address of the visit is jinan, and the time can be reserved in advance. The manufacturer has a special person to receive it.。

Roots blower for building materials industry

Note: All the pictures in this article were taken by hyde powder manufacturer.。

Roots blower for building materials industryis a kind of high quality and low price Roots blower for building materials industry，multifunctional, with functions such as mix, pressurized transportation, sewage disposal, aeration and ventilation，The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the Roots blower for building materials industry perform well in many situations where stable airflow is needed.、Small size and small floor space make it easy to arrange and install in places with limited space.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the Roots blower for building materials industry less vibration and noise.、Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.、Small size and small floor space make it easy to arrange and install in places with limited space.。