What is a Petrochemical industry Roots blower? Introduction to the advantages, characteristics, and principles of the blower

Petrochemical industry Roots blowera rotary compressor that uses two lobed rotors to move relative to each other in a cylinder to compress and transport gas.，The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.、Due to the adoption of synchronous gear transmission and small gap design, the Petrochemical industry Roots blower runs stably and reliably, without contact and wear parts, and has a long service life.、Because of the design of three-blade rotor, the Petrochemical industry Roots blower has little vibration and low noise during operation, and the operation is stable and reliable、The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the Petrochemical industry Roots blower perform well in many situations where stable airflow is needed.、Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.，Commonly used inMaterial fluidization,Desulfurization oxidation,material handling,Pressurized transportation,supply air and so on，the product looks beautiful.，The structure is novel, special, advanced, reasonable and scientific.，it mainly includes rotator, rotator, wallboard, impeller and fuel tank。The following is to introduce the Petrochemical industry Roots blower:

1、Brief introduction of Petrochemical industry Roots blower

Petrochemical industry Roots bloweris a positive displacement blower.，it has the functions of material fluidization, ventilation, supply air, mix and cool，is designed by hyde with advanced technology。

Petrochemical industry Roots blower

2、Petrochemical industry Roots blower characteristics

Petrochemical industry Roots blowerit has the characteristics of economical and durable, durable performance, be of simple construction, stable and reliable and economical and durable，it is widely used in Textile light textile, make paper, aquaculture, pottery and porcelain, Pharmaceutical and chemical industries and other industries，Mainly used formix,aeration,Ventilation,exhaust emission andpick up the suction，the advantage is The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the Petrochemical industry Roots blower less vibration and noise.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.、Small size and small floor space make it easy to arrange and install in places with limited space.、Due to the adoption of synchronous gear transmission and small gap design, the Petrochemical industry Roots blower runs stably and reliably, without contact and wear parts, and has a long service life.、Because of the design of three-blade rotor, the Petrochemical industry Roots blower has little vibration and low noise during operation, and the operation is stable and reliable，it has the functions of material handling, dry, aeration, desulfurization oxidation and aquaculture。

Petrochemical industry Roots blower

3、Advantages of Petrochemical industry Roots blower principle

Petrochemical industry Roots blowerat work,The two three-blade impellers rotate relatively in the space sealed by the casing and the wallboard. Each impeller adopts the envelope of involute or epicycloid, the three blades of each impeller are exactly the same, and the two impellers are also exactly the same, which greatly reduces the machining difficulty. During the rotation of the impeller, air enters the air inlet cavity under the action of atmospheric pressure, and then two blades of each impeller, the wallboard and the casing form a sealed cavity. During the rotation of the impeller, the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades, and because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out, so that the air is continuously transported from the air inlet to the air outlet.，the main features are durable performance, strong adaptability, smooth operation, run smoothly and convenient manufacture，customizable。

Petrochemical industry Roots blower

4、Petrochemical industry Roots blower structure

The Petrochemical industry Roots blower structure is introduced as follows:

1. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the Petrochemical industry Roots blower, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

2. impeller

It is the rotating part of the Petrochemical industry Roots blower, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Petrochemical industry Roots blower has gradually replaced the two-leaf Petrochemical industry Roots blower.

3. rotator

The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

4. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

5. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

Petrochemical industry Roots blower

5、Petrochemical industry Roots blower function

Petrochemical industry Roots blowermultifunctional, with functions such as sewage disposal, cool, pressurized transportation, dry and aquaculture，is an efficient volumetric gas conveying and pressurizing equipment.，It is mostly used in cool, aquaculture, dry, sewage disposal, Pressurized transportation, supply air and so on，in the course of work,It mainly depends on the relative movement of two lobed rotors (usually three-bladed impellers) in the cylinder to compress and transport gas.，generally, it is composed of bearing, muffler, case, fuel tank, wallboard and other major components，productThe overall structural design is simple, diverse and beautiful.。

Petrochemical industry Roots blower

6、High-definition picture display of hyde powder workshop

The finished products of the Petrochemical industry Roots blower factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

hyde

The finished products of the Petrochemical industry Roots blower factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

Petrochemical industry Roots blowerin the course of work,When the motor drives one impeller to rotate, the other impeller will rotate synchronously at the same speed and in the opposite direction under the action of the synchronous gear. In the process of rotation, because the gaps between impeller and impeller, impeller and casing, impeller and wallboard are very small, a vacuum state is formed at the air inlet, and air is sucked into the air inlet cavity under the action of atmospheric pressure. As the impeller continues to rotate, two blades of each impeller, the wallboard and the casing form a sealed cavity, and the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades. Because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out. After continuous inhalation and extrusion, air is continuously transported from the air inlet to the air outlet, completing the whole gas transportation process.，Widely used in aquaculture, dehydrate, pick up the suction, cool and sewage disposal，Small size and small floor space make it easy to arrange and install in places with limited space.、In the process of air intake and exhaust, the Petrochemical industry Roots blower will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the Petrochemical industry Roots blower less vibration and noise.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.、It has high efficiency and can realize gas transportation and pressurization with low energy consumption.。