What is a Roots blower in the smelting industry? Introduction to the advantages, characteristics, and principles of the Three leaf Roots blower

Roots blower in the smelting industryis a positive displacement blower.，Widely used in sewage disposal, supply air, mix, aeration and exhaust emission，in the course of work,The gas is compressed and transported by the relative rotation of a pair of trilobal rotors in the cylinder. Each trilobal rotor is supported by two bearings, and the relative position of the two rotors is always kept constant by using a pair of synchronous gears. During the rotation of the rotor, there are tiny gaps between impeller and impeller, impeller and casing, impeller and side cover, so there is no friction in the working chamber and no lubrication is needed, thus realizing the smooth transportation of gas.，reliable quality。The following is to introduce the Roots blower in the smelting industry:

1、Brief introduction of Roots blower in the smelting industry

Roots blower in the smelting industryis a device that generates positive pressure or negative pressure through the relative rotation of two impellers, thus compressing and conveying gas.，is a kind of high quality and low price Roots blower in the smelting industry，the advantage is In the process of air intake and exhaust, the Roots blower in the smelting industry will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.、It has high efficiency and can realize gas transportation and pressurization with low energy consumption.、The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the Roots blower in the smelting industry perform well in many situations where stable airflow is needed.、Due to the adoption of synchronous gear transmission and small gap design, the Roots blower in the smelting industry runs stably and reliably, without contact and wear parts, and has a long service life.、Because of the design of three-blade rotor, the Roots blower in the smelting industry has little vibration and low noise during operation, and the operation is stable and reliable，it is widely used inpottery and porcelain,Pharmaceutical and chemical industries,coal chemical industry,water treatment,manufacturing industry and other industries，it has the functions of cool, ventilation, material handling, desulfurization oxidation and exhaust emission。

Roots blower in the smelting industry

2、Roots blower in the smelting industry advantage

The advantages of Roots blower in the smelting industry are as follows:

1. Strong adaptability

Roots blower in the smelting industrys are suitable for many purposes and have been widely used in various fields.

2. energy-efficient

The Roots blower in the smelting industry has high efficiency and can realize gas transportation and pressurization with low energy consumption.

3. Economical and durable

The design without lubrication reduces the maintenance cost and improves the economy of the equipment.

4. Long service life

The mechanical friction of the Roots blower in the smelting industry is small and the loss is low, so its service life is relatively long. This enables it to maintain high working efficiency and stability in long-term operation.

5. Reliable operation and convenient maintenance

The Roots blower in the smelting industry has simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.

Roots blower in the smelting industry

3、Roots blower in the smelting industry structure

The Roots blower in the smelting industry structure is introduced as follows:

1. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

2. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the Roots blower in the smelting industry, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

3. impeller

It is the rotating part of the Roots blower in the smelting industry, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Roots blower in the smelting industry has gradually replaced the two-leaf Roots blower in the smelting industry.

4. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

5. muffler

Used to reduce the noise caused by airflow pulsation when the Roots blower in the smelting industry enters and exits.

Roots blower in the smelting industry

4、Roots blower in the smelting industry HD picture

There are many specifications and models of Roots blower in the smelting industry, which can be selected by users at will. The high-definition factory map is available for our customers to visit.。

Roots blower in the smelting industry

Note: All the pictures in this article were taken by hyde manufacturer.。

5、Roots blower in the smelting industry video

You can buy Roots blower in the smelting industry according to your needs and show you Roots blower in the smelting industry videos.。

Roots blower in the smelting industry

As you can see from the live video.，hyde powder it is mainly composed of fuel tank, wallboard, rotator, fuel tank and muffler，productSimple structure and reliable operation.。

6、Roots blower in the smelting industry use

Roots blower in the smelting industryIt can be used for dehydrate, pick up the suction, dry, Desulfurization oxidation, Pressurized transportation, Material fluidization and so on。

Roots blower in the smelting industry

Roots blower in the smelting industryCommonly used inaquaculture,material handling,Ventilation,cool,material handling and so on，it has the functions of pick up the suction, aquaculture, sewage disposal, aeration and material fluidization，The two three-blade impellers rotate relatively in the space sealed by the casing and the wallboard. Each impeller adopts the envelope of involute or epicycloid, the three blades of each impeller are exactly the same, and the two impellers are also exactly the same, which greatly reduces the machining difficulty. During the rotation of the impeller, air enters the air inlet cavity under the action of atmospheric pressure, and then two blades of each impeller, the wallboard and the casing form a sealed cavity. During the rotation of the impeller, the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades, and because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out, so that the air is continuously transported from the air inlet to the air outlet.。